keep hustlin man. I started out with a 57 on a trailer, dragging it with my TJ wrangler for a while. dont let anyone put you down cause you aint got a rig built yet, we all started somewhere.
@relentlesswelding15
3 жыл бұрын
Thanks we appreciate it! It will come with time!
@johngnipper8768
2 жыл бұрын
It is good that the older more experienced operators can help the next generation ,at least the really interested ones make a go of it
@CesarHuerta-ih7oj
Жыл бұрын
Amen 🙏
@longrifle.
Жыл бұрын
In the mid 90's I broke out with a 65 Red Face exactly like yours. Ran it all those years with the R57, its on there to this day and still works. I made a lot of money with that machine and she never let me down. I don't drag leads down the road anymore but I still got her and she will never be for sale! Every time i hear that flathead 4 cyl jump to high idle it makes me smile. You have learned your machine well and made all the correct upgrades. Your overall knowledge of machine and welding is impressive young Skywalker. Your going to make a good welder one day. From an old school rig hand, you have my respect.
@relentlesswelding15
Жыл бұрын
Thank you so much! It means a lot to me!
@marcusandrew1047
3 жыл бұрын
Amazing video an explanation brother. You can tell you take pride in this craft and put in the work to gain the knowledge. Found this video a few weeks back and finally Picked up my reface yesterday. Would you be willing to type out a parts list of all the parts you have on here with their names? Would really appreciate it. God bless
@relentlesswelding15
2 жыл бұрын
Thank you I will work on that!
@johndunn9819
3 жыл бұрын
Thanks for the video and the tips. Especially on the arc characteristics and gear selection. Good stuff
@relentlesswelding15
3 жыл бұрын
Thank you!
@TulanePass
3 жыл бұрын
This the video that KZitem rig welders don’t talk bout. Appreciate the video.
@relentlesswelding15
3 жыл бұрын
Thanks Ken stay tuned for more!
@derekbryant6137
Жыл бұрын
And also make sure that the rack is in the proper position if your rack is out of position it will extinguish in the lower amperage adjustment on fine adjustment if your rack is adjusted correctly you can do a lot lower amperage adjustment with the find current if it's out of adjustment it will extinguish every time
@MBwelding
Жыл бұрын
Good job I got a black face I’m rebuilding and these upgrades will be perfect
@brandonh.8882
Жыл бұрын
I change the oil in my machines every 50 hours, oil is cheap, new parts are not!
@tonyscustomrides
3 жыл бұрын
Great video, one of the best ones out there explaining upgrades and why. Thanks!!
@relentlesswelding15
3 жыл бұрын
Thanks we appreciate it!
@cj7fun579
3 жыл бұрын
Very Good! you pointed out lots of things about these machines that most don't know, that will help others maintain the most popular stick welder ever made.
@relentlesswelding15
3 жыл бұрын
Thank you! We don’t know it all but it’s a lot of fun working on these machines
@armandogonzales1365
Жыл бұрын
It's a beautiful machine it's a Miller killer nothing like the SA 200 it's a true American legend that lasts my freind has a 56 lincoln and won't sell it to me I don't blame him keep our craft alive folks
@wyo_garage20
11 ай бұрын
Very nicely done. Great presentation, articulate and knowledgeable. I like your basic philosophy, take care of her and she’ll take care of you.
@relentlesswelding15
5 ай бұрын
Thanks to
@brandonb7496
2 жыл бұрын
I only change oil twice a year on '79 gas continental, and my 200D pipeline kubota. Each with heavy use, synthetic 5w30 year round in cold Canada.
@SyilxMechanical
10 ай бұрын
Great video man, I'm looking to pick one of these up myself.
@cjgibbons5850
3 жыл бұрын
In the spirit of putting as much info as possible for these old Lincoln's since there's very little of it out there I want to add this problem/solution I recently ran into: If you put a distributor on your machine make sure your coil is well secured. My machine doesn't have a tapped hole one of the side you install the bracket to hold the coil, I could only secure one side between the oil filter bracket and the block. Shoved the coil down and bent the bracket enough where it wouldn't move and thought nothing of it until my machine kept shutting down one day. Turns out my coil shook loose and turned about 90° and the ground wire arced off my oil filter. I secured it again with tape and checked for a few weeks and it didn't move again even though it melted the tape a bit. Long ass story short...a few months went by and I lost arc from my distributor because the module was fried. After talking to an old head Lincoln mechanic I determined that short out from months earlier had to have been the cause of the failure since I was very careful to disconnect all power when I did the mag to distributor swap a year earlier. I think the short on my oil filter was enough to cause damage but not totally kill the module like it would if I had dropped the ground when installing (if I didn't disconnect the batt and on off switch which you really need to do for that upgrade). Anyway hope this helps someone down the road I've been saved by random comments on videos before. Good luck and keep burnin!
@relentlesswelding15
3 жыл бұрын
Thanks
@edwardclark3980
11 ай бұрын
Right side current control will tell you not to exceed a certain #
@justinthorne1919
2 жыл бұрын
love the long hair bro, keep growin helli love mine
@bombardier3qtrlbpsi
6 ай бұрын
Is there a site to find out the yr of a sa200?
@krowbar23
5 ай бұрын
Just love the sound of pipe liner specials.
@tylerhall6455
3 жыл бұрын
Nice video bro. Cool upgrades. I wonder what ur oil change interval is after your mods? Also, is the oil filter upgraded? Because I wouldn't think that just adding that oil cooler would allow for longer change intervals...
@relentlesswelding15
3 жыл бұрын
Yes the oil filter is a larger canister filter instead of a small cartridge filter that it would have came with originally. The lines have also been upgraded to 1/4 instead of 1/8 to increase volume. Once I finish building the machine I will be sending out oil samples for analysis every 50 hours to see what my interval will be
@SmokeyA55
2 жыл бұрын
Thanks for info hadn’t heard of High Speed Engineering they have a nice selection
@cranberrysmoothie1
2 жыл бұрын
That's a nice welder, you did a nice job. One thing I noticed is the plastic fuel shutoff and the filter is after the shutoff. I don't know if you will have problems but I have had those plastic shutoff valves leak on many pieces of equipment, as well as having fuel starvation due to plastic fuel filters being placed after the shutoff. When the engine runs and the fuel shutoff gets turned the fuel in the line, filter, and carb get burned and that can create a vacuum when the engine dies. That vacuum can collapse those cheap filters and cause fuel starvation when you need to run the machine. To mitigate that I put the filter in front of the shutoff, another option may be to use a higher pressure fuel filter meant for a small car or truck. These are just suggestions, I might have to restore my old engine drive welder.
@relentlesswelding15
2 жыл бұрын
Thank you! My brother has not had any issues with it but it makes sense . We will try it with the fuel filter in front.
@ipoopinwalmart5968
2 жыл бұрын
Hell ya. Bad ass welder man. Found one I'm thinking about buying. Needs some work but still a peace of history I would love to have and pass on.
@stevenmchenry9276
2 жыл бұрын
Hey brother I just got a real similar machine. Thanks for describing everything in great detail. Can you put out content as often as you can. Soon as I can save for a go pro I will be putting out videos as well.
@marcocano4687
2 ай бұрын
Have a SA 200 red face won’t strike a arc even after replacing brushes . Only get a little spark. Anyone have any idea what’s going on?
@Smithlyy
Жыл бұрын
great job explaining brother👍
@relentlesswelding15
Жыл бұрын
Thank you
@nikxohs3925
Жыл бұрын
1965 oils was not so good, for this they ask more often changing. now with fully synthetics you can keep them longer
@garyking2792
Жыл бұрын
Good job young man. Keep it up. Thanks for the info.
@relentlesswelding15
Жыл бұрын
No problem
@petermccuskey1832
Жыл бұрын
excellent presentation young man.
@relentlesswelding15
Жыл бұрын
Thanks
@xxno_onexx489
4 ай бұрын
I have a SA 200 f163 gas but don’t know what type of oil filter or oil to use can you tell me which type it takes
@Leightonellert
3 жыл бұрын
Great video buddy
@relentlesswelding15
3 жыл бұрын
Thanks we appreciate it
@gigo21X
3 жыл бұрын
Simple and clean man. Appreciate the video!!
@relentlesswelding15
3 жыл бұрын
Thanks! We will have another update video out soon!
@devonsk8s4
2 жыл бұрын
Love the knowledge your laying down! Keep earning and burning
@relentlesswelding15
2 жыл бұрын
Thank you!
@robertoobregon3750
3 жыл бұрын
Like the oil cooler set up, you can still get parts for a marvel carb at McDonald carb. Nice machine and great presentation.
@relentlesswelding15
3 жыл бұрын
I didn’t know that thanks
@andresg1738
2 жыл бұрын
Thx for this detailed video! Really needed this. Keep it up man
@relentlesswelding15
2 жыл бұрын
Thanks!
@davidspin5353
2 жыл бұрын
I had a black face, nice but too loud and bad feel economy plus no AC power. I like my Pipe Pro 400
@kurtfritch5178
3 жыл бұрын
Awesome video bud. Very informative. And nice machine.
@relentlesswelding15
3 жыл бұрын
Thank you
@calebwatlington950
2 жыл бұрын
I just pulled an SA-200 out of an old shed at my granddads. Could you do a parts list on everything you did?
@appallokelley3207
2 жыл бұрын
Great video man . I love your machine .
@relentlesswelding15
Жыл бұрын
Thanks
@allthegames3783
Жыл бұрын
Hello greetings from Bolivia I have a machine just like Lincoln but I have problems welding and the current voltage would you please help me I would really appreciate it
@relentlesswelding15
Жыл бұрын
Does it run?
@fpscoco
Жыл бұрын
I wish you would have spoke on the prices for each upgrade. Good work bro nice video!
@relentlesswelding15
5 ай бұрын
Someday I will try to include this
@ThePete2432
2 жыл бұрын
Great job on that Sa200 brother
@relentlesswelding15
2 жыл бұрын
Thanks
@brandonb7496
2 жыл бұрын
Awsome job on your welder.
@relentlesswelding15
Жыл бұрын
Thanks
@oldlincolnpipewelder
2 жыл бұрын
Damn! That’s nice man!
@relentlesswelding15
2 жыл бұрын
Thank you! Currently doing a full rebuild
@oldlincolnpipewelder
2 жыл бұрын
@@relentlesswelding15 @3:20 Idk where your at but where we are in VA near WV and MD borders, there’s several places to buy straight gas from several different stations. Depending on how far a station is away from you, I highly recommend using straight gas. My personal welder is a TB 302 and I swear I can hear a big difference in the straight gas vs ethanol. Definitely when there was old ethanol gas in it before. All that said regardless. You have a great career ahead of you! Don’t stop busting your ass and reaching for your limits because the more relationships and networking you build will pay off immensely down the road! Best of luck!
@relentlesswelding15
2 жыл бұрын
@@oldlincolnpipewelder we are located in northern IL. We will have to look out for some stations that have it. Thanks!
@oldlincolnpipewelder
2 жыл бұрын
Ahh i see. I’ve actually heard a few gripes about fuel from IL. As far as Diesel anyway. It varies from state to state, Based on state standards. I found out when I was researching problems with ULS diesel on mechanic/ truck forums. But yeah definitely look it up!
@chrisv.6951
2 жыл бұрын
Great video, I was wondering could u do one showing how to fine tune the ocv's and the low and high idle ?
@relentlesswelding15
2 жыл бұрын
We can do a video on that. Give us about two weeks my brother has it all apart and resealing and painting everything
@chrisv.6951
2 жыл бұрын
@@relentlesswelding15 Rt. On
@Waiakalulu1
2 жыл бұрын
Where did you source that exhaust pipe roof gasket? That thing is awesome! Thanks for the awesome videos. Aloha!
@relentlesswelding15
2 жыл бұрын
Should be able to find it at BW parts
@okiedoke6373
2 жыл бұрын
Full Bridge rectifiers have been used in welding machines ever since welding machines have been built if you get back in the early nineties like 91-92 on Onan powered Bobcat 250 there's only one of the welding machine that I can compare that way be SAE 350 that are currently owned the newer inverter machines are trash Bobcat 260 wouldn't give you $0.50 for it 90% are y'all not going to weld no damn pipeline you going to need a machine that you can combat Arc blow with SA-200 might be a badass pipeline machine but I wouldn't give you $0.50 for one of them in a structural field I'll take a bobcat 250 any day don't have to spend massive amounts of money on a structural machine
@relentlesswelding15
2 жыл бұрын
You are right about that. It is probably not worth it unless you Pipeline and less that 10%of welders will ever do that. To everyone else it’s just a piece of history. The welder makes the weld and not the machine. Very curious how to combat arc blow with a newer machine?
@okiedoke6373
2 жыл бұрын
@@relentlesswelding15 I think this link will help you in your search this is common stuff that they used to teach us in welding school back 1991 Tulsa welding school s whenever I went kzitem.info/news/bejne/x6yQrax8rGKTfYY
@wamiyo152
3 жыл бұрын
Good stuff!
@relentlesswelding15
3 жыл бұрын
Thanks man! How’s the union treating you?
@luislawson2
3 жыл бұрын
DUDE!!
@relentlesswelding15
3 жыл бұрын
Thanks!
@andrewsanchez2001
2 жыл бұрын
What kind of battery would this take?
@andrewsanchez2001
2 жыл бұрын
Just bought a duralast 650 cca
@benb6801
2 жыл бұрын
I would love to buy a sa 200 red face but I’m just starting up will it be worth the investment for side work and oil field work as well? Can you run grinders and a mig machine off that welder ?
@relentlesswelding15
2 жыл бұрын
Probably better machines out there for quick repairs. There is enough auxiliary power to run a grinder but that’s it. It’s made for pipeline and has the best arc characteristics.
@scrapmanindustries
Жыл бұрын
I run mine for doing repairs and stairway fabrication. Like he said definitely better machines out there for the application but these things are beasts. It depends what you can pick up as far as knowing if it will be worth it. Mine cost $3k and then another $7k to rebuild it after a year. A brand new Hobart champion elite costs $3-4k. If you don’t know which way to turn a wrench don’t get a 200, but if you know how to work on stuff and don’t mind maintaining it, go find a decent one and screw all the naysayers.
@briantruck2284
Жыл бұрын
Engine oil has evolved since 1960s
@relentlesswelding15
Жыл бұрын
Very true
@bigcws4522
4 күн бұрын
Can you put that filter system you have on the original marvel I still have the oil bath on mine.
@sonnysteele2616
2 жыл бұрын
What is the difference between a red and black face ?
@relentlesswelding15
2 жыл бұрын
Biggest difference is red face has copper windings and has arguably better arc characteristics. Black face has aluminum windings and don’t have the heat sink the copper windings have. If you do a lot of welding you may have to turn up the fine current (ocv) to get the same weld characteristics. Once the windings cool it will weld the same again.
@cjgibbons5850
3 жыл бұрын
Sooo what's your OCV set at?
@relentlesswelding15
3 жыл бұрын
It’s around 90 at 3rd gear and 100
@cjgibbons5850
3 жыл бұрын
@@relentlesswelding15 right on I keep my 82' blackface at 91 or so and it welds great, but I put a distributor on mine. Slick machine man and good job getting it running right. I know what it is to own an SA, you have to be half a mechanic to own one if it's paying your bills. I think I'm damn near full mechanic 🤣.
@ironsal261
2 жыл бұрын
Did you put w88 brushes ?
@relentlesswelding15
2 жыл бұрын
Yes
@ironsal261
2 жыл бұрын
@@relentlesswelding15 are they worth the almost 400? Lol I’m thinking about getting them
@relentlesswelding15
2 жыл бұрын
@@ironsal261 it’s worth it if you want to smooth out the arc
@ironsal261
2 жыл бұрын
@@relentlesswelding15 I want to try them to see if it will give my cap a better stacking profile
Пікірлер: 105