this is by far the best video I have seen for the updated saluspas and how to replace the impeller. THANK YOU!!! oh. And it’s super easy to unplug the control panel. Just snip the plastic zip tie unplugged, and then plug back in. Helps get that thing out of the way!!!
@terrystewart2070
2 ай бұрын
Kudos on a very good instructional video! I had my identical unit apart about a year ago, as it was leaking. Turned out the factory had pinched that big o ring washer in the pump housing. Ordered kit on Amazon and fixed it. But the impeller was fine at that time. Now I have the dreaded E 02 code, so I got the impeller kit, and have the unit torn apart, but wanted to see what the actual impeller replacement process looked like, and you showed it beautifully! Great jib, and thank you!
@tr24291
4 ай бұрын
Very good video, thanks for taking the time to save us all time and money. I’m going to go get a long screwdriver tomorrow and open mine up and order a new impeller. Incidentally those black thingy’s are called grommets, I love that you didn’t know what anything was called yet you still managed to fix it. Respect!
@ScottyTPF
7 ай бұрын
OMG! Thank you for posting! 😊 I just finished putting my pump back together. Your video saved me.
@cylepath6248
16 күн бұрын
great instruction, video & sound. the car repair videos need to use your instructional as a model.
@TonAAli-rh3cb
4 ай бұрын
Thank you for taking the time to make this video. I was able to follow your instructions and fix my tub!
@glennstout9889
4 ай бұрын
Great video! Thank you for sharing. Just received my pump kit from Amazon. Time to get to work! 😊
@themaddmoeshowgermanshepar1627
3 ай бұрын
Thank you for your video, just ordered my impeller as the old after 4 years of use is damaged........cant wait til new part arrives......
@Suesoulsister
3 ай бұрын
Thanks to your video I tore apart my pump but nothing was wrong with my propeller so Ijust put it back together and it worked 💪 tysm.
@curry1833
11 ай бұрын
Thanks for this. Gave me confidence to try it!
@MonicaRaye
4 ай бұрын
Thank you, thank you thank you you have helped us fix our tub
@dwddoc
10 ай бұрын
This is our third year with our Saluspa. In opening up the hot tub on Sunday (Nov 12th) we got the E02 error. I tested water flow in and out, and tried so many things (we ordered this part kit from amazon hoping it would fix the issue) ~ the propeller change did it (2 days late for $20 US). In reviewing the egg, it was very clean and I was skeptical it was the propeller. I replaced it along with the rod, washers, and plastic pieces in hopes it would fix it. The only damage I found was in the original plastic nut holding the propeller in place - maybe it was that little plastic piece causing the propeller not to center correctly. Anyway, thank you for your video. Our hot tub is now heating up and filtering. Thank you from VA.
@Hoaxlords
10 ай бұрын
I had trouble reaching high water temperature all week until I realized that you should not power the Saluspa with an extension cord. My A.C. voltage was down to only 105V with my extension chord.
@shelleyshearer7264
10 ай бұрын
I'm lost on the extension cord issue.....I assume most of use them as there isn't always power a few feet away. Thanks. I'm replacing my impeller now but then I saw this comment. @@Hoaxlords
@Hoaxlords
10 ай бұрын
@@shelleyshearer7264 I had a 50ft 10A cable which was clearly not allowed. I only just noticed the label saying NO EXTENSION CHORD! My eyesight is not so good. The tub was having trouble reaching 102degF. Last year it worked fine but not this season. Anyway, I am just testing it tonight without any extension chord. If it works, I will report back. I saw some 25ft 12awg heavy duty extension cord which might still just work, but you really need to see 110V to 120V AC at the hot tub AC connector for the hot tub to work properly as intended.
@Hoaxlords
10 ай бұрын
@@shelleyshearer7264 Update: Without the extension chord our hot tub reached 102F in 12hours. However, it has worked sporadically with the extension cord also. If it fails again I will report back. For now I am calling it good.
@Hoaxlords
10 ай бұрын
@@shelleyshearer7264 It run all day at 100F even though I set it to 102F. Now it tonight it is down to 97F. So its back to not working again. Not sure what to try next.
@VictorGrigoletto
7 ай бұрын
Great job here. Your video is a five star rating. You nailed it.
@eileensayler4618
2 ай бұрын
Thank you sooo much for the video! I fixed mine. The impeller was in 4 pieces.
@TheGardener54uk
Ай бұрын
Brilliant video well done , actually wat I need to do .thankyou
@drgjh17
4 ай бұрын
Thank you!! I was able to fix my hot tub
@TheSlyb74
Ай бұрын
Just did the repair as well . Thank you for the video , very helpful !
@kamel357
Ай бұрын
Merci Madame.lour votre tutorial , j'ai réussi à supprimer le code Error E02 Bonne journée de Belgique 🇧🇪 😊😊😊
@EddieHackbarth
11 ай бұрын
Thank you for the video!
@cyclonic7134
8 ай бұрын
Great video. I know you had the e02 error but would your pump just kind of hum for a few seconds and then display e02? My pump just hums as soon as I press the heat button and then quits.
@tonycoleman9856
6 ай бұрын
do you have a link to parts?
@WLTruth
2 ай бұрын
I tried doing this once and the impeller I brought didn’t work. The shaft had to be cut down… I tried going it twice and it didn’t work either time. I bought it used by someone who swore it worked… and I got this POS
@DanielleT35
4 ай бұрын
I need a link to the parts
@joshuafrankamp
2 ай бұрын
Thank you 💯
@WLTruth
2 ай бұрын
Please link the kit you used!
@TheGardener54uk
Ай бұрын
Totally agree no videos
@phillipweisgerber7925
19 күн бұрын
How long have you own this hot tub
@gabrielthesingingpilot
10 ай бұрын
Fantastic, i have a job to do when i get home:) thanks for the video! What was the part number for amazon? I see a few and dont want to order the wrong one. Thanks again!
@AdventureDorks
10 ай бұрын
I ordered this one: Aosnom Water Pump Repair Kit for Bestway Coleman SaluSpa Lay-Z-Spa w/Impeller & Shafts But there seem to be several out there that would work.
@gabrielthesingingpilot
10 ай бұрын
@AdventureDorks thanks! I did order one but actually discovered after replacing the filter that it has fixed the problem. The filter didn't look too dirty though.. let's see how long it lasts. Flow seems to be nice and strong for now.
@GordonRamsden-w7k
10 ай бұрын
Hi, can you tell me if yours made the filter running noise before the E02 code and bleep appeared as mine is totally silent. Thanks
@AdventureDorks
10 ай бұрын
Mine would sound normal for about 2 mins then the filtration stopped as the E02 alarm started.
@joeyereneta1746
6 ай бұрын
mine is the same, totally quiet for a couple seconds before the error. commenter, did you try the impeller replacement? any success…?
@joshkirk4170
10 ай бұрын
did your order the extra gaskets that you replaced from amazon as well?
@AdventureDorks
10 ай бұрын
Yes I ordered a kit from Amazon that had the impeller and gaskets. 👍
@aliciataylor6042
9 ай бұрын
Is that part located on the top or bottom of the pump ?
@ericeric198
Жыл бұрын
Is it still running ok?
@AdventureDorks
Жыл бұрын
Yes! I have to admit that I didn't screw the pump screws tight enough so it leaked profusely - but after I tightened it all up, it's been working perfectly for weeks!
@abigailroby8506
5 ай бұрын
how did u get lip off lol
@ritenalves1
3 ай бұрын
I have error 004 in saluspa, can anyone help me please?
Пікірлер: 51