Nice video, explains a lot about the edger, ty guys... subbed Eddies Channel looks like it will be a good channel.. :)
@markgalicic7788
6 ай бұрын
thank you Barry.
@mcburcke
6 ай бұрын
Very cool! Thanks for shedding some light on the edger rig.
@markgalicic7788
6 ай бұрын
thanks your welcome.
@immortaltyger1569
Ай бұрын
Just signed up for the Eddie Horvath channel too.
@snobear41
6 ай бұрын
Mark, you gave a good description of the workings of the edger. For those wanting more info, Cooks' sawmills has a great video on their edger- Tyler
@johnaddis1022
6 ай бұрын
Love the edger, Love the saw mill too! I watched The Eddie Channel first, it was great he has learned much from you doing your channel. I could almost put both side by side and have a 180 around. Had my snack and desert too! Cheers Gentlemen! John Toccoa GA
@markgalicic7788
6 ай бұрын
thank you John , great comment!
@coryheckler2354
6 ай бұрын
I'm now an Eddi-ite too. I get both barrels of the Bus Motor Mill! 😊 Cant wait for the next ones to come out. Thanks guys...best of luck Eddie! I know you'll do well!
@curtkuhns
6 ай бұрын
Always good sawing wood with you Mark zzzzzz. Keep 'em coming!
@williamwinsor7376
6 ай бұрын
Every time you make man glitter it’s perfect for little chief smokers because in those things the right size pieces is critical. Cherry -oak - hickory smoking wood. Bag it up and sell.
@nicholasbotts6103
5 ай бұрын
We have the same edger minus the lasers. Along with their AC36 Bandmill, setter and sharpener. Great company great machines. 👍🏻
@kevinmcpherson6999
6 ай бұрын
Another great video by the guy's. Keep them coming. Lovely.
@markgalicic7788
6 ай бұрын
thank you Kevin.
@marvinthompson8870
6 ай бұрын
This is fantastic. I have never seen this aspect of your operation.
@markgalicic7788
6 ай бұрын
glad you liked it.
@TheMarkBell
6 ай бұрын
Thank you for the edger demonstration, very well presented by you and Eddie whose channel I will check out next… Boom! 😎
@markgalicic7788
6 ай бұрын
thanks Mark , BOOM!
@douglasseeber8370
6 ай бұрын
I love your channel I have been watching for a long time and it makes my day. I love to see people that knows what a work ethic is in this day and age. Eddie's channel will do great.
@Vincent-pw7gm
6 ай бұрын
I really enjoy your work and I love cherry wood
@garyschacht5032
6 ай бұрын
“Snack videos!” Love it!
@markgalicic7788
6 ай бұрын
thanks Gary!
@kevinknight6302
6 ай бұрын
I am loving the snacks but still want the full meals too
@donmunro7568
6 ай бұрын
I'm subscribed also. Looking forward to more from both channels.
@markgalicic7788
6 ай бұрын
thank you Don.
@anthonyhengst2908
6 ай бұрын
Cool Mr. Horvath. I'm subscribing to your channel once I finish viewing the snack. Its like an appetizer. 😂 Thanks for explaining how the edger gets set up. I was curious how that all went.
@markgalicic7788
6 ай бұрын
thank you Anthony.
@deaddadd
6 ай бұрын
Subbed to Eddie's channel...waiting on ZZ's channel. Buzzy won't have a channel, he's camera shy lol
@markgalicic7788
6 ай бұрын
thank you Dave , ZZ may do one someday but true about Buzzy lol!
@Ed_in_Md
6 ай бұрын
Just subscribed without even looking I know it’s gonna be great!
@lewiemcneely9143
6 ай бұрын
Wonderful! Thanks Guys and God Bless!
@markgalicic7788
6 ай бұрын
thanks Lewie.
@lewiemcneely9143
6 ай бұрын
U 2!@@markgalicic7788
@remmiemax3624
6 ай бұрын
Edger ":snack" yuummy!!!LOL💯💯😎😎👍👍
@markgalicic7788
6 ай бұрын
glad you liked it.
@wilmamcdermott3065
6 ай бұрын
Nice job of sawing
@alexkirkles5066
6 ай бұрын
Three thirty in the morning watching you guys like the edger smart pice of machinery, it’s snowing hear I’m up because I was called out to a van off the road tractor and winch got it back on the road I’ve now pulled the plug for the phone out and the mobile is in the workshop this trick should give me some sleep, have a nice day guys
@cedarcitywelding6776
6 ай бұрын
Subbed to Eddie’s channel as well. Love all the videos. Y’all have a great Christmas
@markgalicic7788
6 ай бұрын
thank you!
@mlt6322
6 ай бұрын
@@markgalicic7788 I was the one who commented on the flickering after the new camera went online. The light flicker was bad and I know it's also a common effect on filming under LED's, that issue has been around since people first tried filming with a TV in the picture, my biggest problem was while the image was flickering the saw action looked like an old clay-mation video of dinosaurs from the 30's and was annoying. if you go back to that vid about a week ago you can see the saw image jumping all over like it had parkenson's, but it's all gone now, I think you fixed it. Marty down in Baltimore by what's left of Beth Steel.
@taraswertelecki3786
6 ай бұрын
Very interesting how your new edger works. It's rather similar to some of the saws the local furniture company I worked at use to this day. I imagine the feed rollers pinch the boards tightly to prevent the possibility of kickback, which can be extremely dangerous to the operator(s).
@robertwazniak9495
6 ай бұрын
Couple of questions... when you saw, and its not for an order, do you saw random widths on the edger or do you try to saw to standard widths like 4", 6", 8"? When you were showing the saw blades, was that collection of square tubes the anti-kickback pawls or is it something else?
@jackmorgan1052
6 ай бұрын
I just subbed! and liked! and commented! and I like this addition
@markgalicic7788
6 ай бұрын
thank you Jack.
@gerryellis3847
6 ай бұрын
Sorry for asking, but what is the blue dot on some logs?
@robhawthorne6892
6 ай бұрын
The pith “center” , sometimes the pith is hard to see because of the anchor seal “the green paint”
@markgalicic7788
6 ай бұрын
that is the center of the pith.
@laomudough
6 ай бұрын
I am snacking on cinnamon/raisin bagels coated with gooey peanut butter .. as the saw mills
@markgalicic7788
6 ай бұрын
that sounds good lol.
@williamellis8993
6 ай бұрын
That sight is a great idea to help minimize waste on that side of the board. Bill
@markgalicic7788
6 ай бұрын
yes it works great.
@terrycannon570
6 ай бұрын
Just watched it and subscribed..
@markgalicic7788
6 ай бұрын
thank you Terry.
@RobertSanders-mp2ef
6 ай бұрын
Frame rate looks good Mark.
@Tom_Lynx_98626
6 ай бұрын
Looks pretty grainy to me..... Love the video regardless.
@ilkerguc4108
6 ай бұрын
👍👍👍
@kevinhenry7273
6 ай бұрын
When you are using both blades do you "eye up" where you want the board cut on the left blade ?
@Sem2890000
6 ай бұрын
Thanks Eddie 👍
@mlbabineaux
6 ай бұрын
Lots of sap wood on the cherry log
@hermanschepers4739
6 ай бұрын
Snacks are yummy
@markgalicic7788
6 ай бұрын
glad you like them.
@londen3547
6 ай бұрын
You need a foot pedal on that edger, give it a tap to activate the conveyor belt, runs until the board is fed thru then stops. I'm surprised they didn't build it that way.
@randydobson1863
6 ай бұрын
hello mark & eddies & it's is randy and i like yours video is cool thanks mark & eddies friends randy
@JamesSimmons-qf4hb
6 ай бұрын
Good video Bus Motor Productions
@markgalicic7788
6 ай бұрын
thanks James.
@robintaylor-mockingeemill8223
6 ай бұрын
What type of price are you looking at for an edger like that ?
@tallbrian100
6 ай бұрын
Subbed to Eddie!
@markgalicic7788
6 ай бұрын
thank you!
@slipshankd1307
5 ай бұрын
They make the trim saw table with two lasers and the saw blades follow the laser where all you do is line up the laser lines on the edges and send it through.
@jimhammer2012
6 ай бұрын
Sure better than the old rusty one! Did you ever get a kiln installed?
@bluethunder1951
6 ай бұрын
When do we get a tour of the Cat loader? The short is just that to short. Would be nice to see it in action loading the log deck.
@roymyers8575
6 ай бұрын
The camera isn’t near as clear as before. Still pretty good!!
@robertlusnia506
6 ай бұрын
I think you guys shoot a great video
@user-ii5dq3vl4r
6 ай бұрын
ok I sub eddies channel
@markgalicic7788
6 ай бұрын
thank you!
@petermclean3358
6 ай бұрын
Way to go Ed will be watching Pete McLean
@10secondcamarostreetmachin15
6 ай бұрын
Stupid question: How do you identify what kind of wood your logs are?
@fricknjeep
6 ай бұрын
hi there well done john
@markgalicic7788
6 ай бұрын
thanks John.
@anthonysaggio6551
6 ай бұрын
Ed did a good job and I subscribe to Ed's channel 😅
@grahamecheers
6 ай бұрын
Sunday special snack for me
@markgalicic7788
6 ай бұрын
hope you enjoy it Graham.
@timluther9305
6 ай бұрын
what kind of car was that in the background in the opening part of the video?
@user-wn8qs7hu1q
6 ай бұрын
You can leave wane on half the board and still make the grade
@alanm3438
6 ай бұрын
You guys are always the "buzz" !!!!!!! Thanks for the video.
@markgalicic7788
6 ай бұрын
thank you alan.
@robertgreen8695
6 ай бұрын
Girl Scout Samoa's and hot chocolate---yum!
@markgalicic7788
6 ай бұрын
Oh yea!
@Eric-1983
6 ай бұрын
I was waiting for ya!
@markgalicic7788
6 ай бұрын
enjoy!
@robhawthorne6892
6 ай бұрын
I’m the 228th subscriber.. 😁
@markgalicic7788
6 ай бұрын
thank you!
@Justiceincorporated.
6 ай бұрын
A scooby snack
@markgalicic7788
6 ай бұрын
I like it lol!
@dalehuff5740
6 ай бұрын
Thanks!
@markgalicic7788
6 ай бұрын
Thank you Dale!
@lambeausouth1
6 ай бұрын
Mark the video log-grapher :-D
@thepubliceye
6 ай бұрын
The video looks about the same to me, but now I don't see that laser
@coryheckler2354
6 ай бұрын
I agree...the vids were fine, Mark.
@rossnolan2883
6 ай бұрын
😊😊😊😊😊😊
@markgalicic7788
6 ай бұрын
thank you.
@melchurmoreau5677
6 ай бұрын
Hey mark, what's up? You doing a very good job, of course that's your normal practice. All the best mark,,I'm viewing from the Caribbean.
@markgalicic7788
6 ай бұрын
thank you , send us some nice warm weather!
@melchurmoreau5677
6 ай бұрын
Anytime you ready,
@Jeff-Lynn
6 ай бұрын
@stevenroberts2490
6 ай бұрын
Abba Yabba get on with it
@stannelson2582
6 ай бұрын
Eddy I’m 378 🇺🇸👍
@markgalicic7788
6 ай бұрын
thank you!
@richparks1966
6 ай бұрын
Sounds like a nice spinoff channel this 'Time with TheEddie Horvath' I think it would be interesting to see what it's like to be TheEddies cell mate at the State Pen, or was that Penn State? A better name might be, 'Doing Time With TheEddie'
@markgalicic7788
6 ай бұрын
I like it LOL!
@ronkolacek9645
6 ай бұрын
To bad you have to shut off the conveyor belt every time....think they would come up with a process that would let it continue to operate.....
@grahamecheers
6 ай бұрын
I was thinking that too
@markgalicic7788
6 ай бұрын
I think it works great , the old edger had a longer infeed and you could rest the board on it but this has a short infeed so you need to stop the belt.
@grahamecheers
6 ай бұрын
@@markgalicic7788 You would struggle to get the plank set up for trimming if the conveyor was moving all the time
@Justiceincorporated.
6 ай бұрын
Sub 381 here 😊
@markgalicic7788
6 ай бұрын
thank you!
@robertwazniak9495
6 ай бұрын
Everything looks good to me... of course, I'm having cataract surgery in a month so, take that for what it's worth. LOL
@brentasher8148
6 ай бұрын
Do you always saw your edging boards separately from the main saw. What I mean is, why don’t you guys edge while you’re sawing the main saw. I’m 3rd gen sawyer, we always are using both at the same time….it’s a sprint but it’s way faster.
@art1muz13
6 ай бұрын
6:15 Me thinks that Mr Galicic may think of building a bar with all the wood that you have lying around. Why? All them guys at your mill fighting to help for a beer. You'd have really inexpensive labour and customers, when the bar was done. You could call the bar ''THE ARTEMUS HANGOUT''.
@fullers1966
6 ай бұрын
Lately your audio is extremely low I have to put my volume wide open to hear you the picture comes through very good it's very clear
@jamesmckay9966
5 ай бұрын
I DIDN'T REALIZE HOW PROFITABLE HAVING A CHANNEL IS. MONEY MONEY MONEY YOU ALL ARE DOING JUST FINE!
@LoisELewis
5 ай бұрын
Hey guys..... have you ever watched any of the Bushcraft Shelters videos? on youtube. Survival with wood and hand tools in the wild forests.❤❤❤❤
@Tadrjbs
6 ай бұрын
Need better and closer camera position for edger.
@Ed_in_Md
6 ай бұрын
Why don’t you leave the hydraulics on all time?
@shwilliedude973
6 ай бұрын
.
@Ed_in_Md
6 ай бұрын
I’m not sure what problem you’re trying to work out. No flickering here and don’t remember ever seeing any.
@byron7165
6 ай бұрын
Flickering is nonexistant today Mark.
@markgalicic7788
6 ай бұрын
yes I think I fixed it.
@drbichat5229
6 ай бұрын
Vide looks a bit jerky. Was fine on previous days
@samuelnason8585
6 ай бұрын
There is no problem with your camera, its youtube that is causing the flickering, they want people to switch to their non free youtube, $14.99 here in canada. They say with ad free and better quality video.
@markgalicic7788
6 ай бұрын
I changed the frame rate and fixed the problem.
@rudydokter5273
6 ай бұрын
video is different the number plates used to be readable in most of the shots , but now are out of focus and the film looks grainy. Not a complaint , trying to help. Rudy
@robertgreen8695
6 ай бұрын
What are you gonna name the edger? How about Eager Edger?
Пікірлер: 139