You just saved me from slingin' this thing! Lol thank you
@ocheeslice
10 ай бұрын
Thank you! I don't have the strength to hold a full can while pouring it into my generator anymore. I'm not even going to start with that awful safety squeeze trigger. I bought a fuel transfer pump but could not use it because of this insert! Now I can refill my generator with ease!
@plantlady1227
Жыл бұрын
Thanks - I just bought some new gas cans - knowing I'd be adding a vent spout and replacing the nozzle with something functional when they arrived. I'd never seen the screen assembly in one before though, and it was in all of the new ones. I had a feeling it would cause more problems than it solved - glad I checked it out first and now know what to do about it.
@gross316inkphotography
7 ай бұрын
Quick and straight to the point. Worked like a charm! Thanks
@DrShout
7 ай бұрын
I hate watching a video or even people explaining something in life where 90% of it is talking about themselves. Get to the point and we’re done.
@battgirltransportation6171
Жыл бұрын
Thank you, just purchased and yeaaa hated filling but love the dispensing design. I just saw the company video saying to NEVER remove this but since I had equal amount of fuel on the ground and in the can, I’ll take my chances with removing it! Thanks
@bettyjohnson2286
Жыл бұрын
Best hack ever! I bought an electric pump so I would not have to lift these full cans to fill the zero turn or generator. I wanted to cry when I saw that sleeve down in there. Of course, I tried pulling it straight out with needle nose. You saved me so much time and frustration, Thank you Thank you Thank you (had them out in under a minute after watching this)
@glfnrtrvr
Жыл бұрын
Thank you. Just bought diesel can and was surprised to see the sleeve inside.
@goesfarfliesnear1447
Жыл бұрын
I haven't made it to this part yet. I've spent about a year with mine trying to figure out how to open the damned thing. Finally, I just took the spout off and used a funnel to fill my lawn mower. The reason it'll never blow up is because no one can get gas in or out of it. You know it's a poor design when there's a lot of videos about how to open it, etc. Thanks for the video. Oh, P.S.: This company has actually disabled comments on their video...hmm.
@PedroPerex
8 ай бұрын
Finally, a sane man in an insane world!
@henrywycislo9454
Ай бұрын
I use a battery operated pump to pull the gas out. Safer and I don't use the stupid spout. Also removed that stupid filter thing. Thank you sir for this video.
@douglasthompson2740
Жыл бұрын
Wow! First person I have ever heard that "liked" that spout!! Not just the insert but the whole spout assembly needs to hit the trash.
@goesfarfliesnear1447
Жыл бұрын
Hallelujah, brother! I miss the old metal cans with a screw on lid and spout. None of this crap that fulfills a new regulation, etc. Worst design ever, and I'm no youngster. Mine seems to be stuck in half-assed mode and cannot be poured out of. Don't get me started on filling it at the gas station either. *&&U^$%#@!!
@mistervacation23
Жыл бұрын
I'm with the government and I'm here to help
@goesfarfliesnear1447
Жыл бұрын
Question Authority
@Serpico1152
Жыл бұрын
They sell these at Wally-World, I cut that green spout lock ring off the can, removed that sleeve, the hose & clamp on the inside of the spout so that the can is able to be completely drained, drilled a 11/64 hole at the top of the handle and installed a small plug that I had in a junk drawer to have a full time vent to avoid fume pressure build up. For those out there that don't DIY with what you have laying around the house - The Government with their stupid safety ideas actually have created dangerous situations for others while keeping a lot of companies in business who sell easy replacement spouts and vent kits to purchase and install them and have a normal type of vintage gas can again!
@karynbanksley7110
10 ай бұрын
I love you for sharing this info! Thank you thank you thank you!!
@Buck1954
11 ай бұрын
In an attempt to make them safer, the cans actually spill more gas and are a pain to use. I bought a pump for mine, so that device must be removed. Thanks for the tip.
@MKrebs-kl7ud
14 күн бұрын
Thanks for the tip- I think the gas can design is terrible though. I inherited two very new of these and couldn’t bring myself to throw them away. I noticed right away the handle is up too high making it hard to lift to the mower gas fill. I like the kind of gas can with a handle on the side opposite of the spout making it way more ergonomic than the scepter. Like one other viewer, I also converted a gas can to the old style with an air vent in the top back and a normal free flowing spout. Got it off Amazon- works great but be careful- the gas flows FAST! 😅
@seancorcoran6450
8 ай бұрын
Thanks Don. Appreciate the tip. I hate that thing.
@seadoogti9288
8 ай бұрын
Great video. 1 minute no BS.
@stevebello8728
11 ай бұрын
Excellent video 👍🏻👍🏻thank you
@ronbland9624
Жыл бұрын
Thank you Don!
@martina21953
8 ай бұрын
Thank you! It took forever to pump three gallons of kerosene! LOL!
@DrShout
7 ай бұрын
I still don’t understand the filter basket inside.
@RangeRov49
Жыл бұрын
2 second job, thank you sir!
@willie417
7 ай бұрын
This help a lot, Thanks.
@SamF1986
4 ай бұрын
Thanks for the video, good stuff
@cyndigoldstein8627
Жыл бұрын
Thank you
@joshfowler6016
9 ай бұрын
Thank you. Doing this.
@bnfimages
27 күн бұрын
Thank you.
@paramagician
2 ай бұрын
Just used a flathead, got in beside the filter thing and pried it out. Took 10 seconds. Stupid cans
@randydavis0047
10 ай бұрын
worked like a charm, saved me from the wife yelling at me again she is unable to fill it
@kathyweigelhi-lophotovideo2984
Жыл бұрын
That sleeve is there for a safety purpose…to fill , just push nozzle straight to 2nd notch.
@campion05
Жыл бұрын
Thank you for the tutorial. Government control breeds diminishing returns.
@DrShout
Жыл бұрын
Any pair of pliers you can grab the inner tube with will work.
@turk-fq7xn
Жыл бұрын
Thanks
@metromadness2016
5 ай бұрын
Just what he was using will lock to it so it wont fall in
@rebel3353
9 ай бұрын
i seem to be the only one who has never had an issue filling these can gas, yeah you can't go fast but going slower has never given me an issue lol
@metromadness2016
5 ай бұрын
I use pumps to remove my gas and these filters stop them from being used.
@cmcer1995
5 ай бұрын
What an idiotic design. I just bought one and went to fill it up and ran into the same problem but couldn't fix it there. So here I am at home on KZitem watching yours to make sure I can get it removed properly. Really, if you can fill it you can't dispense it. The government sticking their ignorant noses into every bodies business creating problems we have to solve. Thanks for showing the easy solution. I will never purchase another of these.
@CincyPlasmaTech
Жыл бұрын
What is the point of that filter? Anything it traps sits at the bottom until it is poured out.
@DrShout
Жыл бұрын
Soooo true. I think it’s more of an explosion proof device, to reduce static build up. If you can’t put gas’s in the can, there won’t be any static 😂
@DarthCorvus
Жыл бұрын
My man
@JohnDeUlloa
Жыл бұрын
Where is the vent on those cans?
@turk-fq7xn
Жыл бұрын
On the side of the spout
@andycondal286
Жыл бұрын
Glory hallelujah my biggest problem with this stupid can thankyou
@ranger053
2 ай бұрын
Take your deer rifle , walk out 75 yds. , salute, then do what from Henry Ford on up did, lid with pin hole was world wide.
Пікірлер: 54