The longer videos are the best man!! Nothing better than throwing one of these bad boys on while I’m working on my own trucks 👍🏻👍🏻👍🏻
@texomarc
Жыл бұрын
Crap yeah, bro! I sure appreciate you hanging out, man. Hope you have a great one.
@cardboardcrawlersrc8805
Жыл бұрын
Heard a lot of people saying they like the long play videos over the short ones. Lots of people drive with em on or cook dinner or work on rigs. I like em. And you voice/inflections are great. You seem happy so people like that. Keep it up.
@texomarc
Жыл бұрын
Thanks man! I know that’s what I do. I don’t always even get to watch, really, listening while I work or drive or wrench or play on the rocks, lol. I appreciate the feedback and hope you have a great one.
@smallkrawlzrc
Жыл бұрын
Could not of said it better myself!
@carlheintzinger6450
Жыл бұрын
I watched the whole video its nice to see buddies get together and crawl and have fun made me want to watch the whole video
@texomarc
Жыл бұрын
Awesome man! That’s the whole point. Buddy time is the best. Not all of us have buddies to play with, so I share mine and try to be a buddy, hangout and just talk about silly little cars. Thanks for being here, bro! Hope you have a great day.
@ChrisDoll
Жыл бұрын
another video packed with sick trucks and lines! shout out to the whole crew, killed it
@texomarc
Жыл бұрын
Thanks bro! Sure appreciate you hanging out and hope you have a great one man!
@ChrisDoll
Жыл бұрын
@@texomarc for sure! was good all around!
@ChrisDoll
Жыл бұрын
@@texomarc i now have watched this video two times. autoplay. funny part is i didn't realize i had until i got to the 42 min mark. then saw my comment. still good the second time around
@texomarc
Жыл бұрын
@@ChrisDoll Nice! Guess I keep it entertaining enough. Thanks for being here bro! Hope you have a great weekend.
@old_and_slow5471
Жыл бұрын
Made it all the way to the end👍 . Love the look of the purple people eater 😂. Only crawlers I have are the wpl c-24's, but love to watch a lot of the smaller truck videos too., Especially the outdoor stuff like your videos show. Had to laugh about the shorts comments. I am old enough to remember when the real short OP (Ocean Pacific) shorts were in style. I was class of '85, so yeah, I'm OLD.🤣
@paulgarcia8846
11 ай бұрын
Watched the whole thing! Love the commentary and pointers! Being new to the sport it’s super helpful! Thank you my man!
@ivanrcn5071
Жыл бұрын
The name of the orange truck is JoJo. Lol. Thank you for the compliments. There is a gladiator in the works for me in the same color. Waiting on parts to finish it. My blue gladiator I am calling "the tick" awesome video like always. I am digging the long video.
@texomarc
Жыл бұрын
Nice! Thanks for telling me now! Lol. You did a great job and I always appreciate you coming out. Hope you have a great week buddy.
@StonerScone
Жыл бұрын
Love watching these long videos on my lunch breaks! Keep ‘em up!
@texomarc
Жыл бұрын
Rock on dude! Happy lunching!
@cardboardcrawlersrc8805
Жыл бұрын
40 mins shout out. Still fully enjoying it
@CrawlDaddyRc
Жыл бұрын
🔥🔥🔥 good times 💯🤙
@texomarc
Жыл бұрын
Thanks bro! Hope you have a great day!
@cardboardcrawlersrc8805
Жыл бұрын
The fifth element. For a name for the chassis 🤔
@treekata3257
Жыл бұрын
Enjoyable as always. I liked this long run video. I think the "Blaze" C10 did the best! Too bad about the slippers. I am a cliff hanger fan. But I have SwampKings on mine.
@texomarc
Жыл бұрын
The swamp kings are great tires! Most situations, they’ll keep up with the pins. Kraig ran them in the latest video on the Cliff. Thanks for the feedback man! Hope you have a great day.
@evintacy7272
Жыл бұрын
Awesome my man
@texomarc
Жыл бұрын
Thanks brother! Hope you have a great one!
@sammyboswelldirtybrc7580
Жыл бұрын
Rigs looking good c10 is awesome looking awesome crawling bro 🔥🔥🔥😎👍
@texomarc
Жыл бұрын
Thanks Sammy! Sure appreciate you man! Hope you have a great week!
@Friskee62
Жыл бұрын
Made it to the end...good stuff, dude. I just 'subbed'...I'm 75 and doing this stuff, indoor and out.
@mohinhcute8006
Жыл бұрын
what Scx24 did was amazing. I am very impressed when RC crawling, move on rocky road. Video very interesting
@texomarc
Жыл бұрын
Thank you so much! Glad you could hangout! Hope you have a great one!
@rockwolfdesigns6384
Жыл бұрын
Still here 42 min. Having a great time man love it you're on the bench with me as I work, cracking me up
@texomarc
Жыл бұрын
I don’t know if it’s a good thing but I’m kinda making videos with that in mind right now. My view count is crashing but I’m getting mad love from you guys. Thanks for your support, Jim! Hope you have a great weekend.
@ryanlawrence7982
Жыл бұрын
Yo! I made it to the end, took me all day but I did it! Great video bro, I really like this format. Running one car at a time really allows everyone to show off their rig and their skills. That c10 was frickin beautiful, I do agree though it needs something on the front of it. I have mine cut similar to that but I left the radiator sticker there and it looks pretty good if I do say so myself. I loved the part where the yator had the lil turd hangin out! 😂 Keep up the great work, lookin forward to the next hour long comp! 🤘
@texomarc
Жыл бұрын
Radical! Thank you so much for the feedback. Glad you made it!!! Hope you have a great day, brother.
@BarbarisII
Жыл бұрын
20 minutes in, definitely gonna finish! I like the long content, especially while working on my rigs. Dude, don't stop saying dude, dude, no matter what they say in these comments! It's part of your personality that would leave a dude void in the dialog, dude! Edit: I agree with their suggestion of a dude counter though. Rub it in!!! That would be hilarious
@texomarc
Жыл бұрын
Aaaaahahahaha! I grew up in California in the 80’s and 90’s. Dude got used for basically anything you could ever want it to mean and express. I could change it up with bruh, bro, buddy, homie, etc, a little more often but I won’t make any promises. Lol. I do need to get my effects and sounds in order to count crap like that and gates and whatever. I’ll get it worked out. Lol. Hope you have a great day! Thanks for hanging out, dude!
@BarbarisII
Жыл бұрын
@@texomarc any time bro. This channel pretty quickly became my favorite for the 24s and I show anyone who will watch lol. Let's hit these goals and not these gates :P
@andrewrichey7374
Жыл бұрын
I’m back watching again for months later I love it this is my passion
@Shane_S.
Жыл бұрын
I don't know man I like longer videos when I'm sitting here wrenching on my rigs🔧 You do a good mix of short / long videos 👍 Appreciate the videos bro!
@texomarc
Жыл бұрын
Thanks for the info and sorry for the late response. Super appreciate you hanging out. Hope you have a great one.
@basc5026
Жыл бұрын
Watched that whole video with ease, thing I love about your vids is the commentary and being able to see the different cars crawl so I can compare them to my rig. Also like seeing how the different drivers approach certain gates, everyones got their own style... Maximus looks TOUGH AS F.. You make the best Crawling vids out there dude!
@texomarc
Жыл бұрын
Wow! Thanks bro! Guess I’ll plan on putting time into one of these every week. Thanks for being here bro and I hope you have a great day!
@rockwolfdesigns6384
Жыл бұрын
Hell yeah hour-long videos every week that'd be great. I love the way you narrate the climb and walk us through and explain what to do right and what not to do
@texomarc
Жыл бұрын
Heck yeah! Thanks man! I’m definitely leaning to doing at least one long video a week because the dudes that I would actually hangout and play with, seem to enjoy it as much as I do. Lol.
@cardboardcrawlersrc8805
Жыл бұрын
57 minutes of goood times.
@texomarc
Жыл бұрын
Heck yeah, dude! You rock!
@trailwomanrc
Жыл бұрын
Took me three sittings but I made it though. lol Amazing crawling area. Great winching. Looking forward to seeing that "Squatty body" official release! I'm stoked on my FMS but I still have some SCX modded trucks I'm tinkering with. I had twitchy steering that became a dead servo. Rock on Texomians!
@texomarc
Жыл бұрын
Hahahaha! I just ordered a mofo servobeast to try, so got that covered if it goes out. I’m wondering if there’s not a bare wire or something? Maybe it’s the radio? Seemed like there was a little bleed through from my rear steer trigger for some reason. I’ll see if I can’t figure it out and talk about the fix when I do. The thinner plastic I ordered got here yesterday, so as soon as I have time, I’ll try it out. Been waiting on that to do the final finishing on the buck. I’ll have the test chassis’s done in the next couple days, then I can focus on getting that body all finished and a bed made for it. Thanks for following along with this progression and offering your feedback. Hope you have a great day!
@trailwomanrc
Жыл бұрын
Thanks for shout. Probably a segway to your new body concepts? Pioneering a new body style? Great idea on the suggested cut lines in the contours. The best cuts do follow contours IMO.
@texomarc
Жыл бұрын
Yes, that’s what I was talking about. Kinda came out of chatting with you. Sounds super cool to me. Now, if I just had enough time for all these ideas! Lol.
@cardboardcrawlersrc8805
Жыл бұрын
The kevin Gibbs sticker would pretty sweet there too bear is sick.
@texomarc
Жыл бұрын
Don’t guess I know anything about what you’re talking about. Sorry!
@andrewrichey7374
Жыл бұрын
Yeah awesome, love a challenge. Yep back from my big RC event the great lakes gauntlet at Walters RC park. 392 registered tiny trucks it was a blast
@texomarc
Жыл бұрын
Wow!!! Minis or 1/10? Some people down here call all the RC’s tiny trucks, so… either way, that’s a crapload! Sounds awesome!!! Sure appreciate you as always and hope you have a great one Andrew!
@andrewrichey7374
Жыл бұрын
@@texomarc 1/10 And 1/24 scale you would have a blast dude, it would be awesome to see you there
@texomarc
Жыл бұрын
@@andrewrichey7374 I’ll do my best! If the dudes buy this chassis like I think they will, I’ll make it!
@AnthonyAndJanell
Жыл бұрын
My kid got me back into gta5 with him... I have it setup that KZitem plays in small window on side instead of radio 😂 so a hour video is all good 👍^_^
@texomarc
Жыл бұрын
Nice!
@rc.remedy
Жыл бұрын
Looks like a good time man.. watching in half hr installments haha
@texomarc
Жыл бұрын
Yeah man, it’s a long one! Didn’t really think about that when I said we could run two cars. Lol. I may start loading all the comp runs on Facebook or something else, maybe another channel? Thanks for hanging out brother. Hope you have a great one.
@rc.remedy
Жыл бұрын
Cheers Josh
@INSIDIOUS-ONE
Жыл бұрын
Love your vids dude! Your commentary is so Frickn funny!! there isn’t one vid where I don’t laugh! I cannot understand why the hater’s hate your commentary it’s the best, well they don’t call’em haters for nothing 😂🤣. I’m always down for longer vids I hate the “shorts” just useless who wants to watch a 13 sec vid 🤷🏼♂️. And your knowledge is also on point, I have actually texoma’d my c10 how you did your “how to texoma style your crawler vids”! Any way keep it up bro your doing awesome things!!!👍🏼💪🏼
@texomarc
Жыл бұрын
Wow! Thanks for this comment! I know I’m not for everybody and that’s okay. I’m sure glad you’re here bro and I’d love to see your rigs! Hope you have a great one brother!
@cardboardcrawlersrc8805
Жыл бұрын
INJORA PURPLE PROBLEM. So, i just learned something yesterday on the version two. Electronics ok so turn everything on like you are going to go for a drive (only version two electronics). Double push the bind button it will blink. Then use what is the lowest switch normally steering dual rate. Once you have double clicked the bind button. It becomes the throttle dual rate switch, now turn that all the way up. Just push 6 or 7 times or hold it down you will see some lights. Now you have readjusted your throttle and it is takes less throttle to get her moving and its sooo smooth.
@texomarc
Жыл бұрын
What!? I’m going back out to the shed right now! I’ll hit you back in a minute.
@texomarc
Жыл бұрын
Okay, so that’s basically like what the switch on the old radio did. Mine only flashed twice to get to the highest setting. Now it takes less trigger and have full power but it didn’t solve my problem. It did better when turning it way down but then you have no torque or speed. It’s the actual startup of the motor. Donaldsneffe on KZitem did a great motor comparison video and he shows what I’m talking about. Once the car is rolling, or when it is already under load, the feel is great and it can go very slow. But the startup can be high, especially on a decline. Thanks for the tip! Pretty cool.
@cardboardcrawlersrc8805
Жыл бұрын
@@texomarc nice update. See I don’t have any upgraded radios (fly sky etc.) and I haven’t run brushless yet so I don’t truly know slow 🤣😂🫤. Yeah so the purple on v2 with this truck is the best I’ve run so far. Good times always.
@texomarc
Жыл бұрын
@@cardboardcrawlersrc8805 It’s great, don’t get me wrong. What I’m talking about is super small and only ever is a problem in certain situations going downhill and trying to be super precise. I ordered a torquebeast, so we’ll see if there’s a difference.
@exlewisrc3674
2 жыл бұрын
I knew I called out of work today for a reason so I could watch this whole video😝 awesome job guys!!! What a sick course layout! Hope you have a good day Brody!
@texomarc
Жыл бұрын
Thanks brother! I sure appreciate you and hope you have a great day!
@karlborling4952
Жыл бұрын
Love it man! What are you running on Maximus as far as wheels? How much over are u on width? Max is the baddest!! I watched the whole thing. So good man.
@texomarc
Жыл бұрын
Awesome! Thanks man! Max is running the MOFO UPW’s with black brass bead lock rings and 6mm brass hubs on a stock width aluminum hex. All of the width is from the wheels. Still use the regular wheel nuts, so they don’t come loose anymore, or at least I don’t have to tighten them every five minutes. I ordered the aluminum 6mm hubs and I’m going to try swapping the rears out to correct the bias instead of adding any more weight. I’d prefer to use the brass bead locks over the brass hubs because they’re less weight, farther out. I think it’s going to be choice! You’ll know right after I do! Lol. Bella and pecker run the same rims, just with the 3mm hubs instead of the 6mm. I sure appreciate you bro and don’t forget to hit me up. I’ve got a chassis with your name on it, ready in the next few days.
@karlborling4952
Жыл бұрын
Hell yeah man! Thanks for the response! I been running the rc4wd reverse steels but I feel like I need more down low. Absolutely love ur vids. Keep ‘em coming !
@karlborling4952
Жыл бұрын
@@texomarc keep me posted on the chassis. If I can get one……stoked.
@texomarc
Жыл бұрын
@@karlborling4952 Yeah bro, just hit me up on insta or Joshua Darrel Ratliff on Facebook messenger. If you don’t have either, Texomarc@gmail.com.
@2chromosomen
Жыл бұрын
Nice rigs wish I had friends 😪
@jayf2487
Жыл бұрын
awesome vid man, I think I want to make my c10 look like that one now haha. already got a torque beast and emax in it. what would you recommend after that to get some texoma performance cheapest possible. I like that jeep vid you did
@texomarc
Жыл бұрын
Have you done wheels? That’s going to be your biggest performance increase. Even just the aluminum will be hugely noticeable. There’s lots to choose from if you want to look cool but in my opinion, the mofo wheels can’t be beat with the tuning options, if performance is what you’re after. Plus, they look rad.
@texomarc
Жыл бұрын
If you’re not ready to spend that money, maybe some brass knuckles?
@texomarc
Жыл бұрын
By the way, thanks! I love that c10, too! Hope you have a great one, buddy!
@jayf2487
Жыл бұрын
@@texomarc thanks for the responses man, I do have tires and wheels on it as well. I might want to try some new tires though, mainly just looking for performance
@andrewrichey7374
Жыл бұрын
Yeah when you have to back up make it count
@texomarc
Жыл бұрын
Yessir!
@PSYCHO13GARAGE
Жыл бұрын
Thank you for almost a full hour of top notch entertainment. Also thanks for the shoutout. If you are seeing this before you see your insta message from me. I emailed you something to check out. Great video brother! Love it!
@texomarc
Жыл бұрын
Thanks dude! I sure appreciate you Dirk! Sorry to scrap your ideas but you did spark the sketch that I sent you. Hope it’s not too much work and hope your day is tops!
@PSYCHO13GARAGE
Жыл бұрын
@@texomarc no worries. That’s how graphic design works. The first look is rarely the one I just wanna get you something you like. Something you see and say “that’s it!”
@texomarc
Жыл бұрын
@@PSYCHO13GARAGE Much love, bro!
@cardboardcrawlersrc8805
Жыл бұрын
Ohh curios as to what you have come up with for gate width?? Asking for a friend 😂 never mind i heard you say8-10 trying to figure it out staying fluid
@texomarc
Жыл бұрын
In competition, the gate width is the minimum that a gate will be. That minimum should be for easy, straight on approaches. What if we just did 5”, 6.5” and 8” gate minimums? At the same time, if wide gates are well thought out, they proved to be difficult for all wheel widths. There were only a couple of gates that were easy being narrow and he had to pay with rollovers to get there, so… it’s hard for me to come up with steadfast rulings on stuff like that. Instead of a hard inch rule, what if we just use the cars in the field to set the gates? Could come up with a simple way of using the car to figure out gate spacing. Eventually, maybe that could lead to some standard “class widths”? I do like the idea of building cars based on width, narrow, medium and wide, would be the classes and could throw wheel size in there too. Part of the problem is not everybody has $600+ primo builds. Where I’m at and going doesn’t exactly represent the field but I’m trying to push it up there. Maybe we could talk to jaysen and see where their gates are at because they’re really narrow. That would obviously be the other end of the comp spectrum, not that it’s lesser or to put anyone down. I gotta work! Lol. Hope you have a great one.
@cardboardcrawlersrc8805
Жыл бұрын
@@texomarc yeah bud. Jaysen runs a 6” gate. His course is great, but it’s for show. Not a great representation of true comp course. And they have a vertical rise. So do the gates at reaction hobby that I’ve seen. I’ve been running 7 inch gates. Half rounds similar to yours. A brand new carpenter pencil is 7 inches so with 5 and 7 year olds setting gates it was a no brainer way to show them how to set them up. And a five year old with a gladiator can make it through. And sometimes we hit them. Making courses do you have to come perfectly straight through seems silly right. Would never happen in 1to 1. Anyhow. This is why some sort of standards coast to. Past would be cool. I also like checking the field. Tenth scale supposedly has 3 gate width for the three classes.
@texomarc
Жыл бұрын
@@cardboardcrawlersrc8805 Yessir. That’s what I was talking about with multiple width gates for different classes, like 1:10. Plus, that’s only the minimum. If you look at some unlimited runs, they’ll have 18” gates that are still ridiculously hard (not wide enough). Usually like a 12” or 14” minimum for that class. A six inch car won’t go through a 7” gate at more than a 30 degree angle.
@allisuebaheza2838
Жыл бұрын
These are awesome designs I’m tryn to go brushless bought the stuff and now need a stock scx24 transmitter for v2 electronics then can put it all together been checking out Etsy do u make the warthog to
@texomarc
Жыл бұрын
V2 for brushless? Doesn’t work. Need v1. Maybe I missed something? Thanks for hangin bro! Hope you have a great one and can get that worked out! Holler if you have questions.
@cardboardcrawlersrc8805
Жыл бұрын
Twitching steering , check controller battieries
@texomarc
Жыл бұрын
I don’t think that was it. Max is running on my flysky and it said to have plenty of battery. Maybe a bare wire or something? It may be the radio. I’ll figure it out.
@texomarc
Жыл бұрын
You are right for the v2’s I know, for sure.
@BPlus-oz7cm
Жыл бұрын
Hey Josh, have you built up a competitive deadbolt? Just curious, I'm new here and loving the hobby. Keep it up player!
@texomarc
Жыл бұрын
Hey bro! I have not. I would like to build one and if it ends up being super rad, I’ll have to build a chassis for it. The one I’m working on now won’t work with the DB front end. It will work with all rear links though. I’ll put it in the queue! Welcome here and welcome to the hobby! It’s too fun! Holler anytime you have e questions and I’ll do my best to get back with you. Hope you have a great one, bro!
@sserna1077
Жыл бұрын
What are you guys using for gates and how do you like them compared to other things you have used?
@anthonymcgee4555
Жыл бұрын
I mean if you could do aleast like 40 minutes that would be good i enjoy the group crawling
@texomarc
Жыл бұрын
Hopefully we can get some good time with the buddies this coming weekend. Thanks for hanging bro. Hope you have a great night.
@ExaltedRC
Жыл бұрын
Are you sure you aren't joely oley with customgrow420? haha
@texomarc
Жыл бұрын
Now I’m beginning to wonder…
@rockwolfdesigns6384
Жыл бұрын
Dude so what does that mean that I am able to follow you while you're talking along
@texomarc
Жыл бұрын
Means you’re as effed as me! Lol
@trevorsanders161
Жыл бұрын
Rad as hell 🤘🏼 I got a super serious 3d printable LCG chassis for ya, if you wanna give it a shot, it’s the way, best weight ratio on the market, it would make quick work of those rocks 😝 #fc1
@texomarc
Жыл бұрын
Bring it! I don’t have a printer yet. Shouldn’t be too long. You can run against Max and Pecker and we’ll see about that! Pecker was perfect 60/40-50/50, when I weighed him, lowest lcg possible and the rails are crazy light. Good luck!
@trevorsanders161
Жыл бұрын
@@texomarc you’re gonna like it! What’s a good email for you brother? I’ll send it when I get back to the casa
@texomarc
Жыл бұрын
@@trevorsanders161 Texomarc@gmail.com
@texomarc
Жыл бұрын
@@trevorsanders161 Heck yeah, bro! Look forward to checking it out.
@trevorsanders161
Жыл бұрын
@@texomarc done and done brother man, excited to see the results, I think you’ll be quite happy with it! It got me to sell all my other chassis’s 😂 including a dsfabworx goblin and a mofo ugly, also gave away an ultra24 chassis after driving the FC1, so I’d say you’re in for a real doozy! It’s got the lowest weight and best ratio in the game :)
@146allie
2 жыл бұрын
Within the first minute and 11 seconds says dude 6 times Only thing im noot a fan of. We need a dude counter for this hour long video
@texomarc
Жыл бұрын
It happens. Thanks for the feedback. Hope you have a good day.
@rockwolfdesigns6384
Жыл бұрын
I will watch an hour long video I hate those little shorts
Пікірлер: 118