See more at Countersteer. www.jpcycles.com/countersteer?Seat_Nut_Replacement_Hack_:_Pro_Tip&C2lopG-w
@waynebishop7775
Жыл бұрын
That is the best tip that I’ve been given by anyone while working on a bike. It took me five minutes and everything was fixed. Much appreciated!
@DamnitDave
3 жыл бұрын
used this just the other day. not all heroes wear capes. thank you
@avohill4
4 жыл бұрын
Thank you thank you thank you. My seat nut broke this morning and my first reaction was "gotta' take the wheel off". Decided to check youtube first and there you were with this neat trick. Terrific.
@thomaswild9044
4 жыл бұрын
FANTASTIC!!!! I was going crazy trying to install a new one. I even tried to get my daughters skinny arm up there.
@BIllyMims
5 ай бұрын
4 year old video saved my day! Didn't think I was going to make our ride. I lost the little clip when I took my seat off. Thought I was in for hours of work. Thank you x1000
@mrdadybuck
2 жыл бұрын
You saved me after failed attempt with my hands from the side and back. I was going to resort to a magnet extension then the youtube light bulb illuminated. 15 seconds later the nut was in place. Thanks again.
@barrygardner67
2 жыл бұрын
I took my seat off to do some work at the battery. My seat nut fell out for the first time. I immediately thought what you said… I’d have to remove the wheel? fender? Damn! Watched your video… seconds later, all was good again! Thank you !! 😁
@del4023
2 жыл бұрын
Thanks a lot from Eire, you saved a few frustrating hours!! Leaving more beer time.
@pjgeraghty623
3 жыл бұрын
Worked perfectly. At my local dealer, the bolt, retaining washer, and nut came to about $10 for the set. I bought two sets, because I don't want to be this irritated again. Thanks!
@kyleh3207
3 ай бұрын
Thank you so much, I was trying to clean the grime from under the clip when the nut dropped out. I was thinking I was screwed until I found this video. Thanks again 🙏
@lespears1206
3 жыл бұрын
I’m am so happy I looked you up. Saved me major cursing and time. Thank you! 🙏🏻
@birdhaus2021
3 жыл бұрын
awesome, mine just fell out while reinstalling my seat.. Who engineered this system??? AMF???
@normshafer2243
8 ай бұрын
Thanks JP Cycles. Excellent tip before I took the shocks off or dropped the rear wheel!! You guys ROCK!!!!
@nursekelly2834
4 жыл бұрын
Thank you soooo much!!!! When attempting to put my seat back on to my ultra classic some how mine fell through the hole and after removing a saddle bag, I realized that my hand wasn't going to fit for me to get it back in place. After about an hour I found your video!! It took me less than a minute 😂 to get it back in place with the zip tie!
@jpcycles
4 жыл бұрын
Nice! Glad it helped.
@stlchuckhd
Жыл бұрын
Awesome seat nut hack! Thanks for sharing!
@johncheatham549
4 жыл бұрын
Mine fell out this morning... you are a life saver!!!!
@franzmaierl6497
2 жыл бұрын
Great ! Lowrider S " two up seat " installed ! Thank you very much !!!
@geraldburrow3524
9 ай бұрын
Man I'm glad I found you guys Soo easy now
@tinalosurdo3929
Жыл бұрын
Thank you... you always have my go-to when I'm trying to figure something out!
@manorrd
2 жыл бұрын
What a great tip. I tried everything, but this made it so easy. Thanks
@MrWhitelightning73
Жыл бұрын
Outstanding. You just saved me a trip to the Harley shop and who knows how much money 😂😂😂
@valerioscaccia9659
4 жыл бұрын
You literally saved me!!!!thank you soooooo much
@rickreiling3095
Жыл бұрын
Brilliant….worked perfectly when installing the new Saddleman SDC seat on my street glide!!!
@cultivationjedi6052
3 жыл бұрын
You seriously just saved me from a panic attack
@KTMGUY95
4 жыл бұрын
Whew! I haven't been able to reach my nuts...now I can! Thanks!
@jpcycles
4 жыл бұрын
try cold water....they may move closer to you
@willnot3297
4 жыл бұрын
Hahahaha...
@KTMGUY95
4 жыл бұрын
@@jpcycles I'm old..they are moving farther and farther away
@nezbittd
11 ай бұрын
Thx for the seat hack... This has saved the day...
@MAHGlie
Жыл бұрын
I found mine to be missing and thought I’d have to remove the wheel. Thanks! New subscriber.
@TaylorMadeMob95
4 ай бұрын
Great video and will save me a bunch of time as I was going to take the rear tire off eventually.
@YogisCycleService
4 жыл бұрын
Ha, I just did a video on that actually a few weeks ago. Very frustrating unless you know what to do. The zip tie is a good idea, I used dental floss and paracord. Worked like a champ
@ecrusch
4 жыл бұрын
Cool tip. Another reason why your channel rocks. Thanks.
@claytonbigsby3236
3 жыл бұрын
Thank you for this video. Mine worked it's way loose, so the replacement got the zip tie and thread lock treatment.
@captnbreka2803
Жыл бұрын
Wow KZitem came through and J&P Cycles just killed with that tip ! Thanks
@BigdogLarry
2 жыл бұрын
Awesome tip! This video is just what I need to be able to put on my 2 up seat. Thank you Sir!
@LakesideHolisticHealthPLLC
2 жыл бұрын
As I sit there stressed and wondering how the heck I am going to put the darn nut back in that fell out.... and freaking out... KZitem saves the day and you guys gave the most simplest and most obvious way to do this.. thanks!!
@theroadking547
4 жыл бұрын
You sir are a genius. Nice tip. I replaced all the black tywraps and used stainless steel I picked up from the Home Depot. They will never dry rot.
@williamcody3473
Жыл бұрын
Mine fell out because the clip came loose. I was wondering WTF I was going to do as I was searching for ways to put it back on. Saw this and thought “It can’t be that easy”. Never been so glad to be wrong!
@rondunlap4984
2 жыл бұрын
Pretty damn slick!! Just saved me hours of a headache
@claritin62
4 жыл бұрын
Thank you for that great tip!!!
@thetempleunfinished
10 ай бұрын
Awesome!!! Thank you! That was so simple... I was ready to remove my rear wheel. Lol
@ChrisFBartlett
5 ай бұрын
You’re a Hero! Awesome tip.
@aperali
2 ай бұрын
I just want to say thank you my friend!!!
@johnbechyne480
3 ай бұрын
😮👍🏼 Good vid, I had a pucker moment, I was fixing to ride to my HD dealer, thank you!
@shigematsui8373
2 жыл бұрын
Thank you for your video. I was thinking about taking my motorcycle to the dealer to have them replaced with a seat nut.
@revbikerbigd8664
4 жыл бұрын
I used a longer piece of wire,with a knot tied on the end!
@sharn2609
Жыл бұрын
THANK YOU! Mine came off when i removed the seat to get to the battery. I was sure there had to be a way without removing the fender.
@ericfolks8127
3 ай бұрын
Thank you so much. You just saved me a ton of time. I appreciate it.
@clownpocket
4 жыл бұрын
Great trick. It’s a lousy setup from HD though, those plastic clips come undone very easily, especially if you have a rack and seat that bolt through the same nut.
@bgrayco69
Жыл бұрын
This is gold, thank you!
@MrJoebell123
2 жыл бұрын
You, sir, are a genius.
@thefubartraveleralibrown2947
3 жыл бұрын
Great hack bro thanks -you the man!
@littlejohn6517
2 жыл бұрын
if the old nut is stripped how do you remove it so you can install the new nut ?
@garyceletti306
2 жыл бұрын
Thank you so much brother WOW that was just to easy.
@prabhnoorwaraich7119
3 жыл бұрын
Thank you so much what a trick
@Maktwins1
3 жыл бұрын
Lifesaver!!! Thank you!
@wheatj001415
6 ай бұрын
Man, this was super helpful!
@androidman73
4 жыл бұрын
Big help thanks for the tip
@ronhedblad2415
2 жыл бұрын
Thanks, man!! You're the best - that really helped me out!
@tricatfilms6136
2 жыл бұрын
I need a video to REMOVE the rear seat nut (to access the battery) on a deceased's Indian Chief Classic as they had a touring seat frame on the back which all but hides the nut, with just a little visibility. I have no idea how to remove the touring frame. I feel like banging the bar with a hammer to dent it inwards to allow me to get a socket on that sucker. Came across your video if you have any tips.
@jeffreyreicher5241
4 жыл бұрын
Simple but effective...thanks for the great tip.
@carystarke8000
Жыл бұрын
Damn, I would not have ever thought of doing that, and I have plenty of wire ties laying around too . THANKS>>>>>>
@TridiverParanormal
2 жыл бұрын
Just got a used 19 road glide special. Found that the metal flange that the screw goes through to attach the seat is broken. Im having trouble finding a replacement.
@JeffMartinez648
2 жыл бұрын
WOW!!! That was easy!!! Thanks bro 😎
@richlofton
8 ай бұрын
Do you have any tips for not breaking them?
@mcyclecollector
4 жыл бұрын
Great tip thanks.
@roberthagen7024
4 жыл бұрын
Thanks man ive been riding around without a screw on my seat .im going to try it right now
@farrukhaziz4468
3 жыл бұрын
God bless you my brother! You have no idea🤣🤣🤣
@markkaplan2133
Жыл бұрын
Can you show a fix for a stripped Honda Shadow 70 ACE rear seat "nut"? The rear seat bolt usually goes into the threaded fender, but now the fender threads is stripped. Got a quick fix for this??
@kilianwicki4271
5 ай бұрын
Thanks, awsome tip🎉
@joeharley87
2 ай бұрын
GREAT TIP.
@timmyb2507
3 жыл бұрын
This is awesome. Thank you!
@ozvampozvamp6319
Жыл бұрын
Does the seat nut work the same on a fiberglass rear fender I can file out the knotch but do I have to reinforce the fiberglass so it don't Crack?¿?
@danpoole3628
3 жыл бұрын
Great tip
@karatejujutsukid8066
2 жыл бұрын
Hello gents. My saddlemen seat bolt bracket has been scratching my rear fender. Any tips on remedying that?
@jimmy_dirtbike
Жыл бұрын
Holy sh1t, you guys just saved me a hell of a lot of work.
@punacunningham9151
3 жыл бұрын
Great info bro,you just saved me $$$ 👍🏼
@kennethcoffelt7670
Жыл бұрын
Saved the day!
@joesolo-op6jh
Жыл бұрын
As always, THANK U
@thomascloonen2726
7 ай бұрын
How about the bracket for the drivers seat any advise how to do that ? Tku
@leonidassolomou4051
2 жыл бұрын
So smart... Thanks! 😘
@NYCBugkiller
2 жыл бұрын
Thank you
@DavidH-D
2 жыл бұрын
Thank you!!!
@steveclausen6937
Жыл бұрын
Rad. Thanks!
@madmike8v72
Жыл бұрын
Thanks!
@ALPHAFTUCK
Жыл бұрын
Ingenious 🙏 thanks
@jazznjayy
Жыл бұрын
what do i do when i have a after market rear end and the fiber glass rear fender is thicker than original fender and u cant cant the locking ring around piece that comes up thru the fender
@Carnivoredj
Жыл бұрын
You just saved me so much damn time!
@kiabig89
2 жыл бұрын
Greetings from new Zealand
@natho369isapedofile
4 жыл бұрын
Awesome tip mate, love watching videos from clued up operators, need to replace mine, will be using this tip, cheers mate.
@tonytravert9944
3 ай бұрын
Thanks! I actually lost that plastic washer and I went to my local Harley dealer ONLY wanting that 10 cents worth piece of plastic, but no no! It comes with the whole assembly at $8. Sometimes you gotta laugh and pay up!
@badboyg2531
Жыл бұрын
Great hack tip thnx
@pokecryptidz5409
2 жыл бұрын
FN thank you 🙏🏼
@AnuarAce007
Жыл бұрын
thanks you....
@cornflakes1983
3 жыл бұрын
The 7 people who disliked this video are idiots....thank you bro!
@jpcycles
3 жыл бұрын
:D
@billflixtone6684
Жыл бұрын
Thanks
@badbaroque7760
2 жыл бұрын
Thank you thank you thank you 🙏
@Jonathan-L
3 ай бұрын
I lost my retaining clip ... I didn't know it was plastic. I thought it was a spring steel snap ring. Why plastic H-D?
@erichnyla1075
Жыл бұрын
Thank you thank you thank you.
@joglockaguinaga8229
4 жыл бұрын
nice pro tip,good thing I ride an XL 1200 so I can use my hand.
Пікірлер: 141