Big thumbs up. Thanks for taking the time to make this video so well. Good pacing, narration, and view. All I've been able to locate until now have been videos for KTM's generation of 250's after this one, and they're different. I wish I could see how you re-assemble, but I figure it's simply reverse-order. I'll be using this to guide me replacing my head gasket next week.
@Martysworkshop
2 жыл бұрын
Thank you for watching. Im glad my video could help.
@AdamWee11
2 жыл бұрын
Awesome vid mate, given me the knowledge before I strip down my own 2010 SXF 250 ! Cheers
@Martysworkshop
2 жыл бұрын
Glad my video cold help, thank you for your feedback 😊
@coreymaillet3563
4 жыл бұрын
Excellent step-by-step description... thank you!
@Martysworkshop
4 жыл бұрын
Thank you for your feedback
@seanpotter4943
3 жыл бұрын
I have the exact same bike . This is the best video regarding engine teardown on KZitem. Good stuff . Any idea how many hours he had on the bottom end?
@Martysworkshop
3 жыл бұрын
Thank you for your feedback, im not sure tbh this bike was not maintained very well so i blame the owner.
@adventuresofjaden6451
3 жыл бұрын
At man if you can reply to me I would love some help On my bike
@Martysworkshop
3 жыл бұрын
What can i help with?
@adventuresofjaden6451
3 жыл бұрын
@@Martysworkshop nvm I figured it out
@JuanOrtiz-wj4rc
Жыл бұрын
i also have this bike 🤠✌️mine seized Sunday March 19 2023 its a 17 year old 250
@Martysworkshop
Жыл бұрын
Thank you For watching
@JuanOrtiz-wj4rc
Жыл бұрын
@@Martysworkshop Marty im waiting for part two of this video
@JuanOrtiz-wj4rc
Жыл бұрын
Great video thanks my friend
@Martysworkshop
Жыл бұрын
Thank you for your feedback 😊
@popandrei8927
3 жыл бұрын
How did you managed to get the spark plug out ? I have the same model and I cant find a tool to take it out
@Martysworkshop
3 жыл бұрын
Its not easy i have a socket that just fits but it is tight fit, i belive rfx make one you could get one from any bike shop or ebay, hope this helps
@MountainGoatSolid
Жыл бұрын
I’m having this issue right now, my 16mm long socket won’t fit down it hits the ledge in the head 😭
@seank404
Жыл бұрын
Angle grinder to shave the edge down worked for me
@workoutworkout8181
Жыл бұрын
Ever do a video on the bottom end?
@Martysworkshop
Жыл бұрын
I did but didn't have time to film it sorry.
@fright_nike09
2 жыл бұрын
Am I able to buy the cam carrier or do I need to buy the entire top end everyone says they are machines to match the head but on my bike and yours the entire cam carrier comes off so should I be able to get just the carrier? Also mine is cracked at the cam journal is that able to be welded and re used? I don’t want to put a ton if I don’t have to any help would be appreciated
@Martysworkshop
2 жыл бұрын
Yes you can just replace the cam carrier i just looked it up on fowlers website, it comes as a complete assembly with top and bottom carrier and the dowls. I would not advise welding. Hope this helps
@fright_nike09
2 жыл бұрын
@@MartysworkshopI’ll get the carrier then thank you a lot keep up the great work also
@Kmg93
3 жыл бұрын
Fair play great video but how many times have you said obviously I reckon 972 without counting
@Martysworkshop
3 жыл бұрын
Thank you for watching, i do have my moments.
@masher5173
3 жыл бұрын
My engine is stuck because one shim is gone how is that posible
@Martysworkshop
3 жыл бұрын
When you say stuck do you mean it won't turn over? I would check the valve hasen't dropped.
@masher5173
3 жыл бұрын
@@Martysworkshop yeah it wont turn over and the shim is gone i am gonna look at the valve
@mikebruegger8654
3 жыл бұрын
No chance in a video with remainder of the repair?
@Martysworkshop
3 жыл бұрын
Sorry i did this bike 6 months ago and only recorded the tear down. Thank you for watching tho
Пікірлер: 34