Learn new DJ skills with our online DJ courses. From beginner to advanced courses, specific to various pieces of DJ hardware and software. Click here to find out more: goo.gl/Y6kgM6
@HipHopHistoryGuy
3 жыл бұрын
Heads up - make sure to hook your Rane SL outputs into the LINE INPUTS of your analog mixer and not the PHONO INPUTS, otherwise it will be completely distorted.
@Crossfader
3 жыл бұрын
Only a turn table should ever be connected to a phono input as the mixer has inbuilt preamps that boost this signals connection, hence the distortion when you plug a line level input in such as the Rane SL
@TheJimejams
4 жыл бұрын
was having issues with my new Numark Scratch mixer skipping and this tutorial helped me solve that problem and also taught me how to use the hot cues. Very helpful
@trevorbanks3287
4 жыл бұрын
I'm also having issues with my Numark Scratch. Serato doesn't show a DECK SETUP option in the Audio tab. Any advice on what you did to get your mixer up and running??? Not finding answers anywhere unfortunately...
@seoulvoice7864
4 жыл бұрын
Trevor Banks did u solve the problem?
@trevorbanks3287
4 жыл бұрын
Seoulcoolguy Yes! I’m running on Mac Catalina so I had to allow serato access to my microphone in the comps privacy settings. By default I probably denied access after upgrading however long ago... possible you might have done the same thing. Hopefully that’s solves your prob!
@seoulvoice7864
4 жыл бұрын
Trevor Banks ahh. I got setatodj allowed to mic. But everything is set propely. I cant see the deckoptions to choose Turntable It makes me crazii
@trevorbanks3287
4 жыл бұрын
Seoulcoolguy weirdly it didn’t give me the deck option either but it did by default activate my turntables and read the time coded vinyl. Maybe double check your mixer inputs are set properly???
@doderiolarkisso4038
7 ай бұрын
Thank you for this. I just got a Rane Seventy Two and couldn't for the life of me figure out how to get this working with my turntables, because the manual is pretty useless in that regard. With your vid i was playing in 5 minutes.
@TheFalconX20
Жыл бұрын
even though i've used serato before, im more of a rekordbox user, but the tutorial will help in someway when i eventually start work on it
@justmeleon
3 жыл бұрын
Had an issue using Pioneer XDJ-XZ with up-to-date Serato and Firmware, with MacOS Catalina, where the vinyl control signal wasn't recognised. FIXED as in another comment by changing privacy settings to allow Serato to access the microphone. AND the second trick was to use the phono input for Channel 3/4 on the back of the mixer but set to COMPUTER input on the front of the mixer for Channel 3/4. So weird and such a simple fix. Posting in case someone else is looking to solve the same issue!
@aidangaffney8896
Жыл бұрын
My setup screen on my Serato DJ Pro looks nothing like that. How can I change the setup to Turntables if I don't have that same page?
@heythisaintebay
6 жыл бұрын
Good vid, been wanting to use vinyl for some time, still not there yet, but this will help when I eventually get there.
@swangodesigns
5 жыл бұрын
Ive wanted to try DVS as well but all this gear is bookoo expensive
@DJAlax909
5 жыл бұрын
@@swangodesigns I feel you that's why I got it on interest free credit from Sweetwater. Just look around and various websites have promotions.
@swangodesigns
5 жыл бұрын
Yea I am currently paying off my JBL prx835's which is less than I would spend on tables and mixer
@Dj_rueboi
6 жыл бұрын
I never knew that the calibration had anything to do with that. I always thought it was for noise around you (sound from speakers etc.)
@djabthrash
3 ай бұрын
Thanks for the video !
@Stompaholik
2 жыл бұрын
I don't have the "Deck Setup" Options in the Audio Tab. What could be wrong?
@akasharya3402
4 жыл бұрын
Best till now thank you
@SausageCF
4 жыл бұрын
I use a DDJ SR2 and recently bought the DVS pack. I'm trying to set up my system as per your video, however when select the audio tab, it doesn't list a turntable option.? Can anyone help with some advice?
@Vladypas
4 жыл бұрын
I think it only works with cdjs/turntables or specific mixers
@eddieramos477
4 жыл бұрын
I have the same problem but I have the unmarked scratch mixer
@user-rx3xg6xc1p
Жыл бұрын
I jave 2 turntables and the djm-s9. Deck 1 won't calibrate. It displays a vertical green line in the center. Deck 1 will not playusic from song just noise.
@boogiedownbronx73
2 жыл бұрын
under audio i do not see the tab turntables....i use a columbia gp3 and akai AMX serato mixer...i just activated DVS/Vinyl...but the sound is very distorted....someone advice me thanks
@IsakMartialArtsOfficial
2 жыл бұрын
when I enabled Vinyl/CDJ controller in the Expansion pack, the collaberation Deck didn't show up I need help plz
@TROUBLE26684
2 ай бұрын
What can i do when the tempo speeds up or down without touching turntables pitch??
@djmseclectic
4 жыл бұрын
This was super helpful!
@aryaesfandiari4573
5 ай бұрын
perfect video, thank you brother
@darkangle513
2 жыл бұрын
any way can help completely new to digital world using Serrato for 1st time its picking up the tables but not reading them no circle display to show there communicating and no set-up for tables in audio tab
@matthewevans7063
Жыл бұрын
why wont my control vinyl move the track? even with my calibration set like you said the vinyl still doesn't trigger the song i just hear the tone. no one else seems to have this problem so i cant find any solutions please i'm desperate for an answer.
@thireshannaicker4078
3 жыл бұрын
Thanks Jamie. Very helpful.
@COJX
5 жыл бұрын
When I go to audio setup, it only shows usb buffer size and not deck set up. How do I fix this?
@jeroneallison8978
4 жыл бұрын
I am having the same issue.
@zzpotoftea
4 жыл бұрын
same question @crossfader
@thimaldealwis1631
4 жыл бұрын
@@zzpotoftea @crossfader did anyone ever figure this out? I've got the same issue even though I'm running Serato DJ Pro and a Rane 68 which should be DVS Unlocked...
@georgioocean7629
2 жыл бұрын
I’ve been on the phone with the Seratoand/Apple and they got me going back-and-forth it does not allow the option on Serato for the turntables tables I’m beginning to hate both companies
@gcleftherealtor3539
Жыл бұрын
In my setup screen there is no audio tab. My issue is this: MacBook Catalina 10.15.7 and Rane 70 mixer. The mixer only sends sound when in internal mode. The cue pads all work. The control vinyl does not (cannot manipulate the sound) When using Pioneer SX2 controller no issue. Only with the Rane 70 n turntables. Advice?
@Mabbio01
3 ай бұрын
Can I put any tracks I want on the Serato Performance 7″ Control Vinyl Black - Pair so I don't have to keep buying vinyl? And is serato dj pro compatible with a RANE TTM 56S mixer?
@dj_sphurrahds
Жыл бұрын
Yo Dj..means rane one can use it endlessly also right..could u make a video with rane one..tq dj.🙏😃
@emkplayboy6
4 ай бұрын
Hello I appreciate your video. I recently purchased the pioneer DJM-S5 along with the Audio-Technica atlp 1240 turn table. Everything is connected properly my problem is when I use this serato control vinyl and press play everything is backwards. I've tried using the keyboard shortcuts q and a and nothing works. Is there perhaps an updated version of the serato control vinyl that I need to be using?
@techsavvyhero
5 жыл бұрын
Very helpful video! Nice Hi-res quality too. Thanks!
@djpaulie_
Жыл бұрын
Do i download the zip or iso file if im running time codes on USB's for CDJ-2000 use with an DJM S7
@schuncke
Жыл бұрын
My DJ Pro audio is blank and I have no idea. Any suggestions
@chrisseraphin1088
2 жыл бұрын
i am using a pioneer ddj-sr2 dvs upgrade ready can i use my denon dn-s3700 on there thanks
@audioFail06
3 жыл бұрын
I recommend being gentle to your Vinyl
@andrescadabid3022
8 ай бұрын
So this only works on the SX3 controller for the DVS option ?
@ARago216
3 жыл бұрын
On the SX3 setup shown here, can you connect to the Phono inputs on 1/2 but map them to channels 3/4 on the controller? Looking to have a 4 deck setup but want to keep 1/2 for the built-in decks and use 3/4 for the external turntables so the faders stay relative to the deck locations.
@jz5748
5 жыл бұрын
Do you have to move the tone arm after certain time?
@Vladypas
5 жыл бұрын
change the anti skating to 0 works wonders 4 me mate cheers
@cristian46901
4 жыл бұрын
I put neadle on the vinyl but I won’t get no sound
@da-juice-tan-tan132
5 ай бұрын
Do you know if old studio live time coded vinyl’s still work with new serato platform
@HookedOnClassics
2 жыл бұрын
I’ve just got this and setting it up , I have sound and music but my green circles are tiny ! Even when I zoom in ? Am I doing something wrong ?
@sanjaywazo
5 жыл бұрын
nice man, I failed to set my sensitivity and was sure it was the deck, but now its crystal smooth DVS goodness. Except my Denon DS1 is acting shit and sound is crap
@djtaliakkepinska122
3 жыл бұрын
I have a Behringer 400 mixer, can I still set up the DVS? kIND REGARDS
@wthproduction6888
4 жыл бұрын
Can i join Reloop rp2000 USB mk2 to the Serato?
@LAULAU-tk1ys
3 жыл бұрын
How do you plug it in. Just with cinch or also with ground signal. And when you plug it in with ground gnd, how do you plug it in ??
@nadolsw
Жыл бұрын
Can anyone tell me the name of the DVS controller shown here?
@parmodkumar-ge9uu
4 жыл бұрын
Very helpful
@OgDj2024
Жыл бұрын
I was wondering if you could help me out. I just got this mixer, DJM S7, and I calibrated the turntables inside the Serato software. But for some reason I can constantly hear the tone playing, no matter what functions I have it on. I can still hear it even when I play the music. Even when the music is not playing and the needle is still going around the control vinyl, I can still hear the tone nonstop! Is there a reason why this is???
@x_addict2798
5 жыл бұрын
This is work for cdj mk1000/turntable???
@jstwinbaby2010
Жыл бұрын
love the info on this video thanks, I do have but one question @timer 226 you discussed about how to switch to whatever your running turntables cdj custom well when I click on audio to choose cdjs it doesn't even show a choice there just a UBS buffering column any support will help thanks
@IndigeniousTaino
Жыл бұрын
Thank you for this!🤙🏽 I have the djm-s7 mixer. Which macbook pro/ windows laptop should I get regarding serato dj pro? Thanks
@gabrielboure5850
Жыл бұрын
I need help with my serato DVS
@jaytheg1927
4 жыл бұрын
What DJ equipment are you using in this video
@thomasneit880
Жыл бұрын
bro please help before I lose my mind I bought special subscription for that DVS shit and my decks are still acting like I'm playing on vinyls I tried everything broo help please
@zaidal-masri208
2 жыл бұрын
Newbie question: why is the bpm not stable and how to fix that? Its been annoying AF
@djghettoblaster
Жыл бұрын
Hi is it normal to hear this annoying high noise through the stylus? When playing at home not too loud?
@rebelvinyl
Жыл бұрын
Hi, i have exaclty the same isue and been searching the internet like crazy. Youre the only one mentioning this. I hope @crossfader replys!
@djghettoblaster
Жыл бұрын
@@rebelvinyl i think its the noisemap vynil noise to have the signal to synchronise the moves on the platters with the song. I have change the stylus and i hear the noise less but i think it's normal...
@rebelvinyl
Жыл бұрын
@@djghettoblaster Thanks so much for your reply, gonna try this out this weekend for sure! I think we are one of few who have super hearing :P
@trevorbanks3287
4 жыл бұрын
I Need some help! I don't have a DECK SETUP option in the Audio tab to connect my turntables, it just shows USB BUFFER SIZE (LATENCY). I'm using a Numark Scratch on a MacBook and Serato DOES recognize the hardware when it's plugged in. All deck inputs are properly set. Tried REL and ABS mode. Not finding solutions for this ANYWHERE. Numark Scratch SHOULD automatically enable DVS which also doesn't seem to be happening... Desperately need answers!
@trevorbanks3287
4 жыл бұрын
FIXED: When running mac OS Catalina, make sure your security & privacy settings allow Serato to have access to your microphone, and any other feature it might need for that matter. Simple solution that can drive you crazy...
@robflores9884
4 жыл бұрын
Just purchased my Pioneer S9 mixer, all drivers are installed, using the latest version of Serato DJ Pro. I have no DVS signal coming from my turntables. What do I need to do??
@rikmannix
Жыл бұрын
Problem I have is I can hear the time code signal even when I switch through - any tips?!?
@rebelvinyl
Жыл бұрын
Yes i got the same issue hope somebody has an answer for this, super annoying. Ore do we have super hearing or something?
@thomascintron9576
4 жыл бұрын
What if you don’t have a serato mixer... just a scratch 2 channel mixer? Do I need a digital turntables like the new Stantons ... or do I have to get that serato box? That’s like a link in between the 2? Thanks
@MountainCat1M
Жыл бұрын
When in absolute mode, what is in the control signal to tell Serato when you've moved the needle forward for it to skip ahead in the track?
@somethingtodoaboutnothing3026
3 жыл бұрын
SO. im a ole school Dj justvgetting back in the game. Radio Shack realistic mixer ole school... I got a reloop elite mixer, a reloop mk2 8000 and a nix 500. im trying to figure out space age DVS, but im confused. do I plug everything in digital ,analog or both. duo I just connect everything to thee mixer or one or the other analog or digital. do both ways work with dvs? anyone got a moment to help out an old schooler catch up to present day djing. it hasn't been exactly, plug and play! lol
@jwjaeger7520
4 жыл бұрын
Great Video!
@JayWerx
5 жыл бұрын
The noise sensitivity moved passed half way and the needles will even pick up sound from the headphones and the waveforms will move even when the deck is stopped.
@BiG_SorD
3 ай бұрын
This will let you play vinyls?
@calvinho2292
4 жыл бұрын
I managed to set it all up and plays fine syncing with Serato software. I am using Pioneer DDJ SX2 and 2x Technics Turntables. However when I play normal vinyl through the Pioneer controller, the sound quality drops, and is not a clean sound compared if I plugged in my turntables to a normal Pioneer mixer (DJM-500). The sound when plugged through the Pioneer DDJ SX2 is so bad I had to give up this set up in order to play and enjoy my vinyl records, which is a shame. Basically the equaliser on the DDJ SX2 didn't help at all, tweaking the knobs didn''t even give that much difference...like turning the bass to max had zero effect. Did I do something wrong? Thanks for your help.
@ELECTRONICMUSIC12
3 жыл бұрын
How do I set up serato through my denon x1800 I'm new to this and would like some help
@rudyonthego
4 жыл бұрын
I'm using Rekordbox with my DJM-250MK2 mixer. When I set up my DVS software, I continue to hear the control signal sound. How can I mute that so that I don't hear it?
@parek3739
3 жыл бұрын
Hi. Is Audio-Technica AT-LP120XUSBSV good DVS?
@potapetsoleksandr1935
Жыл бұрын
I don't have "TURNTABLE" in this folder, what's wrong?
@djvenusss
2 ай бұрын
did you find a solution? we have the same problem right now
@marcioramos8792
2 жыл бұрын
Amazing video! I have a question: which software should I install to use Denon DJ DS1: Serato DJ Pro or Serato DVS? Thank you!
@ignitore
3 жыл бұрын
I have only a1210, a pt 01, an handykutz mixer and an old numark dm1000x . What’s the cheaper option to timecode those analog parts? It would be cheaper than phase dj?
@thurdeephrey
Жыл бұрын
the pitch range on an 1210 is +/-8%, yet the ptch of the song in the software is at 35% whole playing... how do you achieve that? :)
@hubkill
4 жыл бұрын
So Im planing to buy a serato dvs but Im not quite sure if I get how all of this works. Right now I am using two turntables plugged into the mixer and the mixer plugged into the amplifier. My question is what would I have to change to make it all work with dvs. Do i have to buy a mixer with the usb connection, connect turntables to the mixer and then connect the mixer straight to the laptop skiping the amplifier? I would appreciate any help.
@Skiller7777
2 жыл бұрын
So u just plug the turntables into the phono plug or into line in ?
@jonathanprince464
4 жыл бұрын
Coming from someone that has no Serato interface, what do I need before buying up Serato DVS? Last time I heard of Serato they had the Rane SL2 and SL3, since they discountinued them now, is the DVS the better option now? especially since SL3 and SL4 devices range from $300 to $800 now.
@LA-mi5up
2 жыл бұрын
What else do you need ?
@marlumconcha2667
3 жыл бұрын
Do i need an sl box to connect cdj's on my pioneer dj sr2?
@MrWoodysteel
3 жыл бұрын
Is ok if the circle is small? Mine is circular, but it is not as big as the circle in this video.
@yanidy
4 жыл бұрын
CAn Numark TTUSB play DVS or can it be used as DVS ?
@wesleymarkmedia1923
4 жыл бұрын
I seem to be having the same issue as most people in the comments. I have my numark scratch set up with serato dj pro (which should automatically be linked with DVS) but the vinyl option in the audio section of settings does not show? Does anyone have the solution to this?? do i need latest version of mac downloaded?Please help
@trevorbanks3287
4 жыл бұрын
This is crazy. Have you found a solution yet?
@RekonizeOfficial
4 жыл бұрын
Hello, I also have this problem, were you able to resolve it. if you did can you tell me how to fix it
@RekonizeOfficial
4 жыл бұрын
@@trevorbanks3287 Hello, I also have this problem, were you able to resolve it. if you did can you tell me how to fix it
@trevorbanks3287
4 жыл бұрын
Ariel Estrella hey yeah, you have to allow access of your microphone to Serato in your Mac preferences. Most likely when you upgraded your OS to Catalina and opened serato, you didn’t allow access and thought nothing of it, at least that’s what I did.
@RekonizeOfficial
4 жыл бұрын
Trevor Banks Trevor Banks hello thank you . A week ago I did this same exactly thing because I was having a connecting issues . I have Majove operating system . Once I fixed that problem I got a new one. Now I’m Having the same issues that most people on the comment is talking about
@rogue66v
4 жыл бұрын
Great vid ! rekordbox dvs please?
@skillz91745
5 жыл бұрын
When i go to my expansion package I do not Have an option for vinyl/cdj control. One, according to the serato website if I’m running a DJM 3s mixer (which I am) I do not need to purchase any expansion package. My time code is working. I hear the time code buzz and I can play regular vinyl records. So I am assuming my 1200s are working. My question is to get the turntable/cdj option on my software (Serato DJ pro) do I need to purchase the Serato DJ package as an upgrade, the dvs expansion package, or all three in one of the bundles.
@oliviacoy5056
4 жыл бұрын
Please let me know if you find the answer to this as I have the same issue :-)
@trevorbanks3287
4 жыл бұрын
Having the same issue with Numark Scratch. Please lmk if you found an answer for this!
@oliviacoy5056
4 жыл бұрын
@@trevorbanks3287 I uninstalled and then reinstalled the driver, which worked for me: serato email: To resolve the connection issues, you first need to uninstall the drivers for each piece of hardware, then reinstall them exactly as per the article below. support.serato.com/hc/en-us/articles/115001883474-macOS-High-Sierra-10-13-macOS-Mojave-10-14-and-above-driver-install-process Note, you will find a driver uninstaller included in the driver download package found on the manufacturer's website, listed under your hardware. Please ensure that before reinstalling the drivers you have restarted your computer. Finally when reinstalling the driver make sure that you allow this in System Preferences > Security & Privacy > General regardless of being prompted to or not.
@trevorbanks3287
4 жыл бұрын
@@oliviacoy5056 Thanks for the reply. However, the Numark Scratch doesn't require a driver so unfortunately this solve isn't applicable for me.
@oliviacoy5056
4 жыл бұрын
@@trevorbanks3287 Nw hope you manage to sort it
@shadie2k
6 жыл бұрын
Need to charge your MacBook 👀😏
@martinbkildal
2 жыл бұрын
Is it possible to use dvs on one deck, and not the other? I want to use dvs with mt pt01 scratch, but beat from computer Thx
@TheSiimur
2 жыл бұрын
Do these work for traktor ?
@rogue66v
4 жыл бұрын
Is rekordbox dvs video is up?
@djdeepsonlinemaharajas5710
4 жыл бұрын
Will Serato dj pro in ABS mode on DVS through my cdj2000 and sl4 box or nxs mixer ever let me use hot cues even if I plug in another midi and map it to the hot cues buttons on the software? Will there be a update for this ever or will it only work on REL mode - I don’t like REL mode because the cue button on CDJS doesn’t let the track go back to the start...
@nikitakornyushenko3268
4 жыл бұрын
Thank you for that tutorial. I have Numark Scratch, 2x reloop 8000 with condor S.when I connecting, I have the following issues 1) crossfader is not active at all. it doesn't switch between decks. 2) Calibrating settings disappeared after a few scratches. So I need to calibrate once again. Could you please support ?
@djgrifology99
6 ай бұрын
Did you ever find an answer.
@eddieramos477
4 жыл бұрын
I connect my mixer to laptop via USB, but it does not give me the option to choose turntables for my deck setup, is there a reason why? Please reply.
@seoulvoice7864
4 жыл бұрын
Eddie Ramos idk kno y either :((
@dozanova
3 жыл бұрын
same here , did you figure it out??? using a rane TTM 57 serato mixer uggg. maybe cause i updated my mac
@gcleftherealtor3539
3 жыл бұрын
My serato dj pro does not have the turntable option under the audio tab only usb buffer latency.....therefore my turntables are not seen or recognized by my rane 70......advice?
@Crossfader
3 жыл бұрын
Do you have the DVS expansion pack activated?
@gcleftherealtor3539
3 жыл бұрын
@@Crossfader I dont know. Heres situation. On my 2012 macbook pro no issues at all. Serato DJ Pro works well with that laptop with Rane 70 and Pioneer SX2. Issue is with 2020 Macbook Pro. 2020 Macbook Pro works well with Pioneer SX2. However this 2020 Macbook Pro when attempting to use with the Rane 70; my turntables are not seen. Hot cues work but no audio; not able to calibrate tonearm, under audio tab no option for turntables or cdjs. Only thing that you see under audio tab is the horizontal slider to adjust buffer. Thoughts?
@Crossfader
3 жыл бұрын
@@gcleftherealtor3539 Are you using the Big Sur operating system on your new mac? If so, Serato and the Rane 70 aren't yet officially supported
@gcleftherealtor3539
3 жыл бұрын
@@Crossfader no. Catalina 10.15.7
@NSKII-DJ
2 жыл бұрын
Hi there can you mix without stylus?
@franksorry2653
4 жыл бұрын
Imagine a world without DVS, cdjs or controllers.
@byronp8158
4 жыл бұрын
What kind of question is this? We lived it, its called vinyl..
@Crumlish
4 жыл бұрын
Still rocking the vinyl, and dvs , it’s all fantastic
@mariowick7775
6 жыл бұрын
Yeah we need more brain for serato dj setting up etc.
@SOPADELICIOSA
3 жыл бұрын
Sigh. I have Serato DJ Pro and the Serato AMX controller. All I want is to dj with audio files as well as vinyl and CD into the phono inputs as is. I don't want to control the sound of CD or vinyl. I just want the sound to go through the mixer. Simple? Apparently not. :-/ Don't have "deck setup" in the preferences. Do I need that if I don't need DVS? Just want the analogue signal to go through.
@Crossfader
3 жыл бұрын
Flick into THRU mode in Serato :)
@addisoncarter4728
5 жыл бұрын
hey just bought viynls with a s3 mixer and my serato is connected but its still saying "thru" any help
@mikewood8685
4 жыл бұрын
Addison Carter did you figure it out?
@joethane
4 жыл бұрын
Quick question that I cannot find the answer for anywhere. I have 2 Denon DN-S3700’s from my old set up and I was wondering if those would work with dvs?
@Crossfader
4 жыл бұрын
Yes any player playing a time code signal can be used. You’d just plug into the Line input rather than phono. 🙏
@creydadj
3 жыл бұрын
I put my serato dj on relative mode but both my decks are not playing songs. All connections are plugged in
@stuartd01
3 жыл бұрын
Did you manage to resolve this? I'm having the same issue!
@novamarine5997
3 жыл бұрын
Esiste un manuale in italiano per l'installazione di DJ serato DVs ?
@rivvio4195
4 жыл бұрын
I dont know what i am doing wrong but I cant get my Turntables to play the song only a high Pitch plays can you help me
@CarlosRodriguez-qq2md
4 жыл бұрын
Switch your int button....i had the same problem....thats below your absolute and relevance button...that enables you to switch back and forth between real vinyl and the digital code record
@nitrogliserin
4 жыл бұрын
Does Serato DVS work with Numark M6 USB mixer?
@DjFuNkShuN76
5 жыл бұрын
cool video.. but i have been having this issue with my software for a very long time now.. 1st i dont have that set up menu on my audio where i can choose turntable. then i alway have 3 calibration decks. and the most important part is when i'm moving the dvs slow to catch a cue point or in a slow scratch, it drifts. or it skips if im going to slow.. what do you think it could be?
@RekonizeOfficial
4 жыл бұрын
Hello, I am currently having the same issue . I cant figure out why. Did you ever figure out the issue ?
@Stompaholik
2 жыл бұрын
Same here. No Audio Options.
4 жыл бұрын
Does this device allow for Interchangeable mixing, use vinyl and digital at the same time?
@Crossfader
4 жыл бұрын
You can put the DVS into THRU mode to play regular vinyl so yes!
4 жыл бұрын
@@Crossfader Thanks for the reply. What mixer do you recommend that provides basically fuctionality? I have a pair of Technics and a Macbook as my current set up so far
@Crossfader
4 жыл бұрын
Ùlysses De Guzman the Numark Scratch is a brilliant mixer that comes with Serato DVS without breaking the bank!
Пікірлер: 223