WOW I cant thank you enough, I inherited grandmas White 305. This company no longer exists. Your work gave me an idea how to clean it up. All I have to do now is change the tention element on the front of the machine as it was broken during years of storage. Thanks again
@evawallace1822
6 жыл бұрын
my mother-in-law give me a machine ab 4 yrs ago thanks to you all of the videos I was able to get this new home machine model 105 sewing fm all my heart thanks again
@creativecompanion
13 жыл бұрын
You Tube is amazing, thanks to generous people like yourself who are so willing to share their knowledge and experience! Much Gratitude!
@hgib3
12 жыл бұрын
Thank you for this series of sewing machine maintenance! My machine is acting up and definitely in need of cleaning and oiling, now I don't feel so intimidated on taking on the task. I definitely wasn't wanting to spend a whole lot for someone else to do something I could do myself, I'm just thrifty like that. :D May God bless you for sharing!
@MorrieAndMe1
10 жыл бұрын
Thank you so much for these videos! They gave me the confidence to open up my sewing machine, clean and oil it, figure out why it was squeaking, and solve the problem without spending any money! There were two tips that I found particularly helpful: 1) tip the machine back onto a paper towel roll when working with the racer hook and such parts to keep them from falling out everywhere, and 2) to try to keep the screws in their respective pieces as much as possible. I have a Singer Prelude, and it is a bit different than the machine shown so it requires screws to be removed from 2-3 sides before you can remove certain outside pieces of the machine. This made it difficult to keep the screws with the outside plastic casing pieces. So I pulled out an old ice cube tray, and each time I pulled out a screw I wrote on a little piece of paper where the screw belonged, and put the screw and piece of paper in the ice cube tray. Then when I was done, I worked backwards through my ice cube tray to make sure I put all of the screws in in the same order as I removed them. The other thing I did differently was since the screws on the needle plate were difficult to access and I didn't want to scratch that up and I didn't have a fancy screw driver, I hand-tightened and hand-un-screwed the screws as much as possible, so I only had to use the screw driver a little bit to get the screws started and finished. Thanks again!
@TheNevarranSeeker
13 жыл бұрын
This is a great video! I had no idea what to do with my machine before I watched this, but now I've got a better sense of the parts. Thanks so much!
@theonlyjamiebourgeois9703
7 жыл бұрын
thank you for this!!! most videos just show servicing the really easy places to get to and don't take off body panels liked you do!
@DebbieBuckland
14 жыл бұрын
I LOVE you! I really needed to know this. I'll be watching and doing all this. I have an elna 2003 that really needs servicing and you are saving me $200!!! Thank you so much
@rosieredfield
4 жыл бұрын
Thank you so much. I have the identical machine and your instructions and advice were very clear!
@SavedByGrace-mk8gd
9 жыл бұрын
God bless you! I just fixed my machine!
@Atiragram1723
Жыл бұрын
Thankfully
@HollyRose2425
8 жыл бұрын
Hi pretty Lady. I love your videos, they are well explained, pleasing to hear and so informative. I have a White Model 268 sewing machine that my mother left to me. I got it out of the mothballs, and ran for a while. It was n the zig zag control and really hummed along(good motor). My problem is this: when I moved the lever to change to straight stitching, the hand wheel won't rotate the driver in the race. Is there anyway to correct this? I will be eagerly awaiting any advice you can offer. Holly Rose Lawrence, You Tube channel where my music catalog will unroll for viewing. Happy Sewing!
@googeeish
9 жыл бұрын
you're fantastic! thanks
@kiralynnsands762
7 жыл бұрын
she reminds me of John water's, "serial mom". this is rad
@lisahope8039
10 жыл бұрын
Where's the rest, on how to oil and put back together.....
@andrewj4442
5 жыл бұрын
kzitem.info/news/bejne/lnynr4GVrJ2qiaA
@gattbe5611
9 жыл бұрын
sorry.. but you do NOT blow out dust as it can be driven further into the machine..you may have gotten away with this for years ,but it is still not the right way...the use of screwdrivers is very well explained.mostly a good video..best wishes,Bill,,a man who sews..
@bekina1
9 жыл бұрын
I was told a very long time ago not to blow😒 you need to vacuum with the teeny tiny attachments...right?
@sma2595
12 жыл бұрын
Thank you!
@michelleward4347
10 жыл бұрын
Okay, we've got the thing apart, now what? where's the rest?! I'm looking and looking....
@robgolmsted
15 жыл бұрын
We currently don't have a video about Re-Timing...but maybe one day soon.
@robgolmsted
15 жыл бұрын
You can get a can of air spray at Costco, Camera stores, Some hardware stores
@CommunistCommando1
3 ай бұрын
I've bought a second Elna 3003, so I'm all Ears...
@seasons0123
11 жыл бұрын
Can you do this on a new machine?? I have a Kenmore that is only about 6 yo and it is set up differently. I'm trying to clean it out but also trying to get the reverse button to work again. Where do you buy Machine oil??? Great video!
@dixieflowers1
14 жыл бұрын
Could you tell me how to remove the top from a New Home Memory Craft 7000? Do you have a website or a blog?
@ninajeanette2
15 жыл бұрын
and where did you get air sprayer thingy?
@lindarodgers1401
11 жыл бұрын
Where did you get the metal pick for cleaning?
@msvic60ify
10 жыл бұрын
where did you get that screw driver assc.
@md2992
10 жыл бұрын
Amazon has a tool similar to the one she is using called a 6 in 1 hammer.
@ninajeanette2
15 жыл бұрын
what kid of screwdriver is that?
@jareeshiashelby1648
11 жыл бұрын
please let us know as soon as you do.
@carmenrenzulli4958
9 жыл бұрын
Did not like most people will not be able to put it together
Пікірлер: 37