Not had a single issue with mine, works perfectly every time I use it!!
@MrLilredmachine
3 жыл бұрын
It's good to know there are working ones. I wonder if there are 'batches' that have slight internal differences. Mine is just awful, with a too long return spring and so many tolerance issues it just doesn't cycle properly. 🤷
@extramile3382
3 жыл бұрын
Hello Chris, have you tried compatibility with other Glock mags? It looks likr the gas router of this Galaxy is different then the normal glock..
@MrLilredmachine
3 жыл бұрын
@@extramile3382 the Galaxy comes with a gen 5 Glock mag. The gas routers are different to other Glock (gen3/4) mags and those mags don't work particularly well if at all in the galaxy.
@extramile3382
3 жыл бұрын
@@MrLilredmachine Thanks mate. I know this is the new gas route introduce by WE / AW custom on their latest VX Glock with RMR cut slide. The mag gas route has exact gas pattern as yours and the AW custom VX glock also performs shitty with other mag. But in KYairsoft.com, they sell this spesific gas route if we want to modify our other glock mag gas route which will not be my chosen path.
@encikbob
3 жыл бұрын
Still ok till now Chris?
@urdadspapi7248
2 жыл бұрын
I suggest getting the TTI upgraded hop up for the g series, it makes the fun work WAY better and is easy asf to install
@MrLilredmachine
2 жыл бұрын
Anything that helps the hop has got to be a good thing!
@jorenz94
2 жыл бұрын
we have the same problem on the same gun but i fixed it by putting car oil on it i know its dumb but it works fine now
@MrLilredmachine
2 жыл бұрын
Anything that gets them moving mate. 👍 Still stupid that their quality control is so bad that any customer should ever have to do anything like this. 🙄
@davidwanc11
3 жыл бұрын
There goes all the plans I had for this gun. I was seriously considering getting 2 eventually and turning one into a "carbine", but now it looks like I'll have to bury the plan six feet under. Comparing WE to Icarus would be a disservice to the latter because at least the guy was able to get off the ground. XD Great review. Appreciate the honesty. But I don't think that hop up alone can even be salvaged in the first place. Why WE didn't opt for a TDC hop system on a fixed slide pistol is beyond me.
@MrLilredmachine
3 жыл бұрын
The hop up is the main issue, it would be possible to massage the nozzle and spring to get it to fire more than 5 shots on a fresh mag, but the hop up is a non starter. It adjusts poorly and doesn't hold it's zero at all. Even when it does, the consistency is terrible. To make a fixed barrel weapon look this bad is an incredible achievement. The review was a bit of a bust, but it was worth doing to try to prevent people from dropping decent money on a boat anchor of a weapon.
@neilelbourn9241
2 жыл бұрын
I have just got one coming From a boneyard and they said the nozzle spring is gone. Hopefully I can repair it or it will be a wall hanger
@MrLilredmachine
2 жыл бұрын
It's most likely the faux ejector that pulls back the nozzle cos the spring is shite. Hadron designs Airsoft has a 300% stiffer nozzle spring for these now, I heavily suggest purchasing one, it should get it up and running. Apart from that, if it is the faux ejector arm, the only place I know where you can get one at the moment is KY Airsoft.
@neilelbourn9241
2 жыл бұрын
@@MrLilredmachine it was the ejector arm and not just that it was well abused so ordered the main bolt bit if it’s called that is well
@luispaneto6635
2 жыл бұрын
That’s must just me an issue with your because I just bought one a few days ago and have had no issue with it and I’ve ran two full drum mags threw it
@MrLilredmachine
2 жыл бұрын
If you read the rest of the comments on this video you'll see it certainly isn't just mine dude. It's been a while and WE might have sorted their production out by now though, but the early ones there was a strong chance you were getting a dud.
@oldmanaustin
3 жыл бұрын
Mine and my friends work great, no problems at all. If you have a problem with it, get in touch with the store you got it from. Mine chronos at 340 fps
@MrLilredmachine
3 жыл бұрын
There do appear to be good ones about, which gives me hope that I can fix mine. I do wonder what the lemon rate is. It's a bit late to send mine back, it's in bits all over the table at the moment. 😂
@mrcube2865
Жыл бұрын
i can confirm, my gun hase the same issues. it doesn't fire properly and the spring is to weak and the hop up screw unscrews when u shoot the gun so every match u have to change the hop up back to its origanal state. (sorry for my bad english) they have actualy made a new hop up that u can buy for as an upgrade but it is so expensive that u are better of selling your gun
@MrLilredmachine
Жыл бұрын
Yeah, for the money it is new it really should have a working and reliable hop up!
@mrcube2865
Жыл бұрын
@@MrLilredmachine i have just orderd a new spring and hop up and im going to see if this inproves the gun
@cannonballbrad9522
3 жыл бұрын
I’m so glad I saw your review. You are not alone. I put a review up on my channel too with very similar issues!!
@cannonballbrad9522
3 жыл бұрын
I dropped a sub because I appreciate Kate honesty
@MrLilredmachine
3 жыл бұрын
Cheers mate! Yeah I watched your vid on it before I fired mine the first time. It has the same issues as yours, it hasn't broken the little pot metal hook yet, but it probably will soon due to the amount of drag on the nozzle. Thanks for the sub!
@Sadaygamer2076
3 жыл бұрын
I never own those kind of pistol but maybe you can try to sand lower of the nozzle a bit? And put some hardstop at the end of your nozzle spring
@MrLilredmachine
3 жыл бұрын
Sanding the nozzle is a possibility absolutely, primary issue is the return spring, which is an extension spring, not a compression spring like in a conventional GBB pistol so preloading wont work. Thanks very much for the suggestions though!
@Bumpkin_KR-0
3 жыл бұрын
Honestly the design is there, mine has worked so far. I'd shelf it for now and wait for aftermarket. Hell maybe in another 2-5 months I wouldn't be surprised if some of the 3d printing stores have some parts ready for it
@MrLilredmachine
3 жыл бұрын
I actually love the overall design, you can tell that from my unboxing video. It feels so much nicer than the AAP-01 as well, but then at the money it is compared I kinda hoped it would. I just think that if you are designing something entirely proprietary it really needs to work and work well for everyone, and that's not a strong point of WE as a brand - they have too many lemons that require rebuilding/refinishing out of the box.
@Bumpkin_KR-0
3 жыл бұрын
@@MrLilredmachine I agree and have seen the evidence for myself as well. I've also been wanting to get a decent gbb rifle or SMG, but being in America we have certain laws that prevents most of the good stuff from coming or it's bought out too fast to make an educated final decision. Leaving most WE stuff to sit there and stare back at you saying, "Come on, you know you want to."
@blank8969
2 жыл бұрын
have mine, though it does have a bit of a sticky bolt. same thing happened with my marui 18c slide though, until i broke it in. consider that's something that might be necessary? the stock hop rubber is pretty good, can always, but the system does suck. cnc rotary/tdc hop conversions are on the market now, pretty decent. of course, on the scale that you paid £140+ for it, that's subpar. i only spent ~$90 on mine, and it simply just runs. best of luck.
@MrLilredmachine
2 жыл бұрын
Hey there. If you watch the 'redemption' video I did of the Galaxy, you will see why it didn't run, and why it never would have unless I broke it in manually. I ended up fixing it and selling it at a reduced price to a viewer who wanted a go with one. The problem with the Galaxy is that SOME are okay and others are not. The quality control is pretty terrible on them, and that is something that runs true with most of WE's guns.
@michaelsarkady7338
3 жыл бұрын
Came across this after purchase. Would not cycle out of box. Can’t believe this is still for sale . Mine fired twice and now locked halfway
@MrLilredmachine
3 жыл бұрын
Hi mate, I'd check out the 'redemption' video I did on the Galaxy. Yours sounds like it has the same problem as mine did.
@clockwork6966
3 жыл бұрын
Hi man, thanks for the video. I really really like the look of this thing and seriously want to buy one but these problems are worrying me. Does anyone know if any revisions have been made (publicly or not) to remedy these issues?
@MrLilredmachine
3 жыл бұрын
Not that I know of unfortunately. Some seem to be good, others need work out the box. If you know what you are doing, it's worth a shot. Are you based in the uk?
@clockwork6966
3 жыл бұрын
@@MrLilredmachineah I see. That's a shame. And yes I am UK based, why?
@MrLilredmachine
3 жыл бұрын
@@clockwork6966 if you want a cheap 'fixed' one to try out i can sell you mine for a dramatically reduced price? I don't know if you watched the redux video I did on it but i got it firing just fine with a bit (a fair amount actually) of work.
@clockwork6966
3 жыл бұрын
@@MrLilredmachine i just watched your redux video now and it was actually great to see how the hop up worked in it and why the nozzle was getting stuck. I prefer the look of the gold one but 2nd to that the black is very nice so let me know what kind of price you are thinking and ill toss up between that and a new gold one?
@MrLilredmachine
3 жыл бұрын
@@clockwork6966 60 quid plus postage (probably a tenner at the most, maybe less) so at the most half price over buying one brand new. I'll pull it out, go through it with lube and make sure it's all ship shape before sending it out. The repairs I had to make shouldn't affect longevity (it's got 150 shots through it at the most) and it's guaranteed to work which is more than you'll get buying a brand new gold one. Up to you though. ;)
@the-sarge84
3 жыл бұрын
Top work!
@MrLilredmachine
3 жыл бұрын
Cheers dude! 👍
@the-sarge84
3 жыл бұрын
@@MrLilredmachine I was hoping this may have been a metal aap 01, but instead it seems like it's a bit of a turd. Good Info and thanks for your service, looks like you took one for the team on this one!
@MrLilredmachine
3 жыл бұрын
@@the-sarge84 honestly was hoping the same. It kind of punts home the point that maybe a metal AAP-01 is better accomplished by buying an AAP-01 and fittimg a metal slide. Like I was saying in the vid, throwing 70 quid at one makes an incredible pistol, something the WE will never be.
@PEZ1985
3 жыл бұрын
Played with one 2 weeks ago. Was so underwhelmed. I love the style of the ruger MK4 but like the browning I'm rather annoyed they dont work :(
@MrLilredmachine
3 жыл бұрын
Was it a fully working one that just wasn't that impressive? I've still not seen one IRL that works to play with. 🤷
@PEZ1985
3 жыл бұрын
@@MrLilredmachine the Galaxy was brand new out of the box.
@bradleyruud6809
Жыл бұрын
This thing sucks. It's not a reliable. Nozzle spring comes loose outta the box. Your review is spot on and this product is NOT FUNCTIONAL
@MrLilredmachine
Жыл бұрын
Yeah, it's a bit of a trainwreck. I don't know if it's fixed at all yet, or whether WE is still punting it out with numerous failure points. Knowing WE... well it's not a hopeful situation is it? Haha.
@AgentOfEvil1
3 жыл бұрын
Weird. Never had a problem with mine either. Lifts .30 BB's like laser 40m plus. Never tested for range. The hop screw sucks though. Sorry yours is knackered. Must be infuriating.
@brendeneplett810
3 жыл бұрын
It's W . E Thats all I have to say
@MrLilredmachine
3 жыл бұрын
Aye. Got suckered in by the hi-capas being half decent. Everything else I've owned from them has been terrible. 😂
@Boinji
3 жыл бұрын
I'm begging that mine isn't fucked
@MrLilredmachine
3 жыл бұрын
Fingers crossed! Hopefully they've improved as more people seem to be happier with them recently.
@the-sarge84
3 жыл бұрын
Think that hop up is bad, you should see the bag of shit in my ares m14ebr and that was a 550 quid gun
@MrLilredmachine
3 жыл бұрын
I never get why manufacturers try to reinvent the wheel. Most hops are a tried and tested design, going off the rails and designing something new and shite seems to be cutting the nose off to spite the face. haha. To be honest it's why I tend to avoid expensive airsoft, finding them to be shite is... upsetting.
@the-sarge84
3 жыл бұрын
@@MrLilredmachine it was an engagement pressy from me to myself at the time 🤣 It's almost like a TDC style, but the whole set up is a clusterfuck. Shit air seal, inconsistent hop up, erratic fps........the whole think needs nuking. It's an expensive wall hanger! Do these manufacturers just not twat these things before they send them out to be sold?
@reecethurman4714
3 жыл бұрын
Pretty ridiculous in all honesty
@MrLilredmachine
3 жыл бұрын
I've seen there are some good ones out there, gives me hope I can sort this one out.
Пікірлер: 64