Eu tenho uma dessa.... Em perfeito estado, ganhei de um amigo... Ele comprou em.1971....
@jville533
3 жыл бұрын
Thanks for the video, I opened mine to clean and lube but couldn't figure out where the anti-reverse arm was suppose be located. positioned, you video answered my question. Have to be real careful not to bend the thin brass tabs that strattle the anti-reverse cog.
@superstrike
3 жыл бұрын
Thanks for watching! That's why I keep recording the service maintenance reels. Tight Lines!
@TheGnthreman
8 жыл бұрын
Ive got six of these and two of the 10's still use them today and are the only ones i ever use.
I have the complete set, black 10 sg bantam. The silver 100 and the rare bird the bantam 100xsg the gold one all in pristine condition. Will do a video on them soon
@superstrike
2 жыл бұрын
Thanks for watching!
@carmabitesbac
11 жыл бұрын
Straight to the Point ! I Like It .....
@SoraTV
5 жыл бұрын
👍 Bantam 100!
@kalebsnipes
5 жыл бұрын
I have one just like this and a 10Xsg. Would you happen to know how to assemble the 10x. I can’t figure out the anti reverse mechanism
@superstrike
5 жыл бұрын
Thanks for watching! I couldn't find out the parts list of the SG. But replacement.com will help you.
@jville533
3 жыл бұрын
Kaleb, I have the 100x SG and I couldn't figure out the anti reverse also, but finally did. If you haven't got it yet, the anti-reverse foes on the pin below the worm screw gear. The thin brass tabs strattle the cog beneath the main gear. I had mine apart a half dozen times until I finally figured our that the brass tabs where bent together to form a V preventing the anti-reverse from engaging. Once I straightened out the tabs and positioned them so they strattled the cog put in place on pin, then it worked like it should. I hope this helps if you hadn't got it yet.
@rostammirzadi9845
5 жыл бұрын
Do you have a step by step guide to cleaning old bantams by any chance?
@superstrike
5 жыл бұрын
Thanks for watching! I know a lot about old Abu reel, but the Bantam is little challenging for me. However, I'll try this soon. Thanks,
@bleth821
4 жыл бұрын
My grandma let me pick from her husbands old rods and I chose one with this reel in gun metal blue and it really needs to be cleaned, helpful video but any tips on how to maintain the individual parts? Also any way to safely bend the metal, it has started to warp over the 25 years it has stayed mostly unmoved in her basement.
@superstrike
4 жыл бұрын
Thanks for watching! simple cleaning is the best. Because it's a very old reel, try to handle nice and easy!
@jhill777
7 жыл бұрын
First, thank you for the video! Where did you get the new bearings, and what size do you need for this reel?
@superstrike
7 жыл бұрын
please visit Mike's reel repair or Boca bearing. Thanks for watching!
@bsdgffishtuna5186
3 жыл бұрын
So just one drag washer? do any of the vintage bantams have better drag like the 300? thx!!
@superstrike
3 жыл бұрын
No, it's not for it. Thanks for watching!
@santiagokaroldanielaaviles3646
2 жыл бұрын
Para cuantas libras aguantará
@superstrike
2 жыл бұрын
Thanks for watching! up to 12lb.
@TXH1138
3 жыл бұрын
My spool release button will go down to disengage, but does not come back up when you start reeling in. Any idea what is wrong?
@superstrike
3 жыл бұрын
Thanks for watching! When I cleaned and removed cured grease, it might fix...
@TXH1138
3 жыл бұрын
@@superstrike It was a broken spring. Thanks to your detailed video, I was able to know which one as soon as I opened the case.
Пікірлер: 32