Looking good Trey, i see uou almost at that 1k 💪🏼🔥 keep up the good work man. I was off the Tube for a while just getting back into it. Good to see you almost there. Merry Christmas brother 🎄
@treysterthepainterturner8404
9 ай бұрын
Yes sir. I think it’s mainly from the new paint system 😄 that’s when they was coming in after that. Haha. I preciate it brother. And Merry Christmas to you too!💪🏾🌲🌲
@thetriggerman954
9 ай бұрын
@@treysterthepainterturner8404 good stuff. Never know what these damn people want to see 🤣
Hey I really like your channel. I have been watching all the 100 ln videos and I am just going to point a few things out.. MB40 wet bed will give you a lot of problems because is only meant to be use with "PASTEL" colors so use MB50 or 50x by checking ur weather app. Using whatever spraygun you want is only going to change your peals and metallics so you are going to think ur colors don't match but is mostly your gun they recommend 1.3 RP But 1.4 hvlp will work as well , although so far you have been successful that might change when the temperature change and humidity goes up or down. I wish you the best of lucks and I'm looking forward to watch a lot more videos. God Bless
@treysterthepainterturner8404
9 ай бұрын
I preciate the info bro. Ik the reps been telling me use the 40 to stay open longer. And gun wise ik they told me the Iwata was fine and the devilbiss I have the blue one was fine kuz the both was recommended the Sata hvlp I have they didn’t wnt me to use that so that why I switched my RP for base and hvlp for clear but other than that I have had success with it. I appreciate the love. 💪🏾😎
@josemsm
9 ай бұрын
@treysterthepainterturner8404 hey man is my pleasure... mb40 was specifically developed for pastel colors. For day 5o day usage I highly recommend mb50 but u have to do it 1 panel at the time... which means you should not spray your wetbed in the whole job and then come back with base that might be the reason why you need the wetbed to stay open for so long... I train people all over the country and I have not seen the need to use mb40 for regular colors. Wish you the best of lucks.
@treysterthepainterturner8404
9 ай бұрын
@josemsm yeah just to stay open longer
@josemsm
9 ай бұрын
@treysterthepainterturner8404 if done one panel at the time there's no need to stay open for too long. Give it a try and let me know.
@treysterthepainterturner8404
9 ай бұрын
@josemsm I’ll try it.
@stiyure5599
4 ай бұрын
You ever have issues with slight spotchyness or metallics standing out too much in certain areas?
@treysterthepainterturner8404
4 ай бұрын
Yeah I did in the beginning when I changed to this paint system Normally it’s because u not using the proper gun and the gun not letting it out like it needs too.
@Tyler.56
9 ай бұрын
So now that you have been using the 100 line for little while now, do you like it better than than spies hecker hi tech?
@treysterthepainterturner8404
9 ай бұрын
Haven’t used spies Hecker hi tec. I was using spies Hecker solvent base paint. And yes I love it. It’s way faster I’m able to get the car in and out of the booth and get more cars flowing.
@ricardopalacios3896
8 ай бұрын
So far what spray gun has work best for u and 1.3 or 1.4 also when u spray the base what is the temperature in the both? Thanks for the help.
@treysterthepainterturner8404
8 ай бұрын
When u ask what spray gun works best for me what do u mean for base or clear?? And my booth stay between 75 to 80 degrees for base and clear.
@ricardopalacios3896
8 ай бұрын
Which is your best for base and which one is the good one for clear I have two weeks spraying glasurit 100. And so far I like it but sometimes I feel like maybe a different gun will work better I’m using 1.3 ls 400 and w 400 1.3 for clear coat.
@treysterthepainterturner8404
8 ай бұрын
@ricardopalacios3896 oooh. Oh no the LS-400 it does ok. My best base gun that I have for this 100 line is the Devilbliss ProLite with the HV30 on it. It’s hands down the best for me. And I just got a Devilbiss Tekna Basecoat gun and I used it on one job today and it have the HV20 on it does amazing. I have a silver tomorrow to test on it. But them seem to be the best for me and I have the Satajet 5500 Rp for it but it just not so great for me with it. And the Devilbliss are both 1.4 tip.
@ricardopalacios3896
8 ай бұрын
Thanks for your time I will be watching you. 👍👍
@treysterthepainterturner8404
8 ай бұрын
@ricardopalacios3896 no problem brother. I preciate it. 💪🏾😎
@franciscoangeles320
6 ай бұрын
So you really don’t trust the Camara they provided? Or you just trying to build your spray out deck?
@treysterthepainterturner8404
6 ай бұрын
Both. Spray out decks and I don’t trust it much. I go through all the steps and still can’t get it to do right. I sand it with 3 to 8k then I buff with 1 and 2 then I clean it with 700 water base cleaner. It struggles with grays and silvers to me.
@franciscoangeles320
6 ай бұрын
@@treysterthepainterturner8404 Bro!😁 I would upload a video to show you the way I do the Camara shot and the choosing of the variant. I would also take the same formula make a spray out card and spray a car so that you can believe me that it works. I have been painting this paint line for 3 weeks and so far I have not gotten a redo. I’m just glad to help out another person. Let me know if that’s ok with you and I’ll make the video. Thanks and have a bless one homie.😎
@treysterthepainterturner8404
6 ай бұрын
@franciscoangeles320 I think it would be. I even look at the graph and make sure it’s closer to the match and it still don’t work with the grays and silvers.
Пікірлер: 35