Thank you for teaching me in 10 minutes what my professor failed to teach me in half the semester
@colchilibeck
2 жыл бұрын
I glad you found it helpful!
@noahcalhoun8719
Жыл бұрын
Yeah I know same here. Teachers been explaining fuel trims for a week and this taught me more
@vegasking7022
8 ай бұрын
You guys didn't learn it because you guys were probably the ones who slept in class or was out flirting with the girls during the lab curriculum.
@philipcbarrera1537
4 ай бұрын
One of the best in explaining what Fuel Trim does and how to isolate a drivability issue.
@mohammedsiddeg3948
4 ай бұрын
I have not liked or commented on a video in my life but the explanation you did made me do so ……hats off 👏🏽👏🏽
@melwebb8485
2 жыл бұрын
Love the simplicity its finally made me get my head around fuel trims and understand how it all works.
@warriorsf911
2 жыл бұрын
Probably the best fuel trim explanation I’ve ever seen on youtube. Thanks for sharing.
@dieseldan1
3 ай бұрын
Best explanation of fuel trims I've seen yet! Made it so much easier to understand.
@labradormcgraw
3 жыл бұрын
Great explanation. The pictorial representation works really well. Thank you.
@pctuterman1
2 жыл бұрын
Awesome teaching. Love the visual. Really makes understanding easy.
@tonyharris3205
2 жыл бұрын
thankyou so much!! ive been fighting this exact rich issue on my built evo x and im going to tackle diagnosing my regulator tomorrow thanks to this video! literally these exact symptoms youve described for rich conditions
@StationRussification
9 ай бұрын
Long Term is the window of time the adaptive memory dictates the fuel trim, Short Term is live data calculating to learn the parameters for the adaptive memory to update the Long Term. The O2 sensor signals lean below .45 volts & rich above .45. The Engine Controller only cares about that threshold & uses that to determine fuel trim. .. in other words the computer calculates the % of time that the O2 sensor is past the threshold of .45 volts & does that each time the threshold is crossed.
@dougwatson703
Жыл бұрын
Best explanation of fuel trims I've viewed, thanks!
@explorehunter
3 жыл бұрын
Clearly explained the myth about fuel trims 🌹👌👍.. very good illustration and description.
@trealwilliams1563
2 жыл бұрын
You've hit the nail dead-on, Grrreat Work 💯🖖🏾👍🏽
@AngelSaysHey
3 жыл бұрын
PERFECT explanation, Thank you
@eddd6827
2 ай бұрын
Thank you for taking time and explaining!!! Very easy to understand! Thank you so much! ❤️
@jacobouso8285
Жыл бұрын
Thanks, you finally made me understand after trying to learn this from various sources in vein.
@lugnut1009
2 жыл бұрын
Very good explanation! Thank you
@johnmitchell2741
Жыл бұрын
This video was extremely helpful . Thanks for taking the time to make it😀
@chrisolson6444
Жыл бұрын
I'm a visual learner. Thank you for explaining fuel trims.
@raimondtutu3248
2 жыл бұрын
Brilliant explanation!
@francisdsa6790
2 жыл бұрын
Very good explanation and demonstration appreciate thank you 💐🙏
@bertcochran1770
2 жыл бұрын
Very good information, thanks so much.
@BWSRbushcraft
6 ай бұрын
Very well and simply explained...thank you
@homeroJoseGarrido
Жыл бұрын
great video !! way more simple and easy to understand thank you
@tehmtbz
5 ай бұрын
Very intuitive explanation.
@chadrose
Жыл бұрын
Thank you for the teachings
@bdub3871
3 жыл бұрын
Awesome video. Thank you
@MarkSmith-js2pu
5 ай бұрын
Excellent job!
@mauiztic
10 ай бұрын
Simply excellent
@paulwells4203
2 жыл бұрын
Well done, it reminded me of the Khan Academy videos my kids watch to learn Calculus etc. Concise, no excessive talking or bad jokes you give a clear explanation of a topic that will help people diagnose their car's problem. Thanks again, Subscribed.
@sollykhan2385
Жыл бұрын
ohh yes, the 'KHAN' academy, glad were doing something positive 😇
@malcolmmarzo2461
6 ай бұрын
Excellent teaching on your part. An old adage applies to teaching: The way to learn something is to teach it.
@earldaisgomez3959
3 жыл бұрын
Dear sir. Good explanation. Thanks
@calholli
Жыл бұрын
It makes more sense to think of it as an AC signal floating on a biased voltage. The Short term trim is your AC signal alternating, and the Long term trim is a bias that follows the short term action, to account for what it is doing, that way the short term can drop back to zero and continue to alternate, while the long term is holding the offset.. It's so much easier to show it on a graph this way; and I know it's hard to explain in words like this.
@masterofnone7846
6 ай бұрын
Amazing stuff here!
@ehasaranga
2 жыл бұрын
thank you very much for this explaination
@freedom6919741
5 ай бұрын
Great video !
@adanarceo4636
3 жыл бұрын
Thanks for sharing this valuable information Colin. This is easy to understand because the way you explained. I really appreciate it brother. I m your newest subscriber. 👍
@LuckyLe7
3 жыл бұрын
Pretty clear. Thank you
@pedroluizoliveira2417
Жыл бұрын
Thank you! Bro Great explanation
@FREEPROGRAMS22
2 жыл бұрын
Great explanation there 👍🏾
@Maverickf22flyer
3 жыл бұрын
At last. A much better video explaining the fundamentals behind the fuel trims. Now..., I have a Focus III 1.0 Ecoboost (2015 Facelift) and it had about 25000km when I bought it (second hand) and everything was perfectly fine..., until my bad habit of trying to test things the hard and costly way, brought me with an issue that I haven't been able to solve for 2 years with all of the diagnoses done by a Ford maintenance facility and some other Ford "know-how" guy. I have poured a "fuel cleaner" in my tank at a very high dose compared to that recommended (some 10-15 times higher dose) thinking: "If I put more, nothing should go wrong, it's suppose to just clean, right...?". Well, guess what, the engine started to run very rought at idle with a lot of misfires and after eventually that gone away over time, the fuel consumption went to almost 20% higher than it was before adding that crap into the fuel. From what I think, the solution within that fuel cleaner has somehow got stuck on both O2 sensors, making them tell a lot of lies to the ECU, which takes the O2 data as true data. Since I've meddled with that cleaner solution, my LTFT remained stuck somewhere at positive 11%. Sometimes it goes to positive 12% and above. That is interpreted by the ECU as a vacuum leak and "thinking" that there's too much oxygen within the mixture, it pumps more fuel for a given air mass. The ECU does it's job correctly, but I'm more than sure that both O2 sensors tell the ECU that too much oxygen is coming on the exhaust, such as..., running leaner than it should..., which is very false. At least this is how I see the problem. I would like to understand from you if indeed the O2 sensors can foul the ECU to believe that there's too much oxygen being taken in the mixture or not and also to know if you think that the nuisance cleaning solution might've damaged the fuel injectors somehow and thus the faulty fuel injectors might be to blame for the interpreted too much oxygen, idk. Looking forward to how might see this issue! Thank you very for your effort Cheers!
@sajanaabeywardana9725
3 жыл бұрын
Superb explanation
@kuldilakh7106
3 жыл бұрын
Gr8 Mr.President.!
@laneheron8677
2 ай бұрын
Great explanation
@mohammedhasan118
6 ай бұрын
بارك الله فيك
@ra.dawkins1441
3 жыл бұрын
Well done.
@FranciscoPerez-go8ys
9 ай бұрын
Very good explanation thanks
@batughandurkaya4033
3 ай бұрын
Very helpful thanks a lot !
@YNguyen-xk1fp
3 жыл бұрын
thank you for explanation
@bharada80
6 ай бұрын
I am from Indonesia, thanks very good....
@valentinsofroniev165
2 жыл бұрын
Thank you so much!
@badmintonlesson
Жыл бұрын
I have a questions... My vehicle. LTFT -8.6 steadily..... STFT is moving +- 10 How can i understand about LTFT Negative (-8.6) continuously ??
@kenya2012asia
2 жыл бұрын
Very useful. I just have a question. My case is LTFT -24%. STFT is almost 0% at idle but If higher rev range over 2500, STFT will be 15-20%. What happens in my car? If LTFT is based on STFT, LTFT will be slowly to 0% or a positive %. Also, the STFT increase at higher rev range is an issue? Or normal?
@ryans413
3 жыл бұрын
So after an hour drive my STFT was around -4 to +6 and LTFT always seems too be at -15 and only gets up too maybe -11 -5 is that normal
@prospexican
2 жыл бұрын
im still watching, but what was the matematcs to keep shrt/long trim within 10% of each other?
@mptrader1620
Ай бұрын
This was an excellent presentation and explanation. Thanks. What if STFT never return to a normal range and LTFT also are high 12.5% during this time. Obviously there is some kind of leak but why would the STFT not return to normal especially under load. The car runs fine otherwise.
@jonathanmonger111
Жыл бұрын
You're the best
@jonathanmonger111
Жыл бұрын
Well understood
@georgemikadze3648
Ай бұрын
Well thank you so much for perfect explaination, just on question, So if everithing is good (ideally), both indicators stft and ltft should tend to 0?
@colchilibeck
Ай бұрын
Ideally they will be around 0. STFT will move around a lot while driving which is normal.
@dannybailes3948
Жыл бұрын
Very helpful. I may have a medium vacuum leak
@nadeem5476
Жыл бұрын
what should be the ideal most readings of both the trims?
@runezoneful
3 жыл бұрын
Thanks alot
@camaroahmed
3 жыл бұрын
i own a 79 caprice classic equipped with Lq4 engine while i tuning by hp tuner i have notice that STFT & LTFT never read no matter what i do still read 0% however i use 2 o2 sensors and hooked up to ECM but i'm not using BCM at all due to engine swap, any assurances to activate these STFT & LTFT
@nhlanhlamagagula7467
3 жыл бұрын
Thank you for the review I now have better understanding, it appears we need to check the long term stats more than short term since the short term fluctuates and long term is the reading of the short term over time ..Please let me know at what percentage should one investigate or preventive measures, I believe the MIL lights above 25% either lean or rich condition base on long term fuel trim..
@colchilibeck
3 жыл бұрын
If you see anything over 10% (+/-) then there is something going wrong.
@olegkukhlevskiy6006
3 жыл бұрын
@@colchilibeck -/+10 on LTFT right? Not the small one
@colchilibeck
3 жыл бұрын
@@olegkukhlevskiy6006 correct
@olegkukhlevskiy6006
3 жыл бұрын
@@colchilibeck tnx for the reply, i have -25 st and -0.16 on lt when I accelerate, im ok right?
@colchilibeck
3 жыл бұрын
@@olegkukhlevskiy6006 I wouldn’t worry too much about what it is under acceleration. What is your long-term at after you go for a drive? If long-term is still fairly negative after a drive and it idle, you could have a fuel delivery issue.
@atifabusalim7217
2 жыл бұрын
Very nice vedio But i think it better to practicall Please do this in soon future
@alexanderoronov4392
8 ай бұрын
Very good explanations, except that you messed up the negative and positive trims. If the displayed fuel trim value is a negative number, it means that the ECU is decreasing the injector pulse width to subtract fuel from the air/fuel mixture to lean out the air/fuel mixture because the input data it is receiving tells it that the mixture is too rich. If the displayed fuel trim value is a positive number, it means that the ECU is increasing the injector pulse width to add fuel to the air/fuel mixture to enrich the air/fuel mixture because the input data it is receiving tells it that the mixture is too lean.
@mattsmith2739
11 ай бұрын
Hello, is there a easy way to tell if o2s is bad...Make more videos this one was pretty good
@baki4king
2 жыл бұрын
I FKNG LOVE YOU MAN!!!
@notmenotme614
3 жыл бұрын
What is an acceptable amount for LTFT, to be working within limits? In the past it had fouling of one of the plugs. causing a misfire. When the plug is clean the misfire is fixed. When I connect an OBD2 reader to my car and idle after warmed up (closed loop). The STFT acts as expected, hunting from 0.8%to 2.3% However the LTFT remains stationary at -11.7% 02S1 slight fluctuation from +0.07mA to -0.09mA O2S2 slight fluctuation around 0.7V
@ryans413
3 жыл бұрын
I get the same but LTFT is like -15 after an hour drive it only gets up to -10 to -5 never goes zero and STFT hovers around 0
@SugathanAravindan
3 жыл бұрын
Nice explanation. Is this true for both diesel and petrol cars ?
@labradormcgraw
3 жыл бұрын
Just petrol. Diesel engines work differently - they don't have fuel trims.
@WV591
2 жыл бұрын
I miss cars with carburetors and no computers.
@MM_in_Havasu
3 жыл бұрын
Am attempting to chase down problems in my '14 Chrysler 300C hemi from a P219A(left bank cylinder imbalance/AFR), nothing wrong with engine with compression test 245 psi in all cylinders across the board and sub 10% leakdown, no valvetrain damage, swapped injectors from left to right, fuel pressure tests normal @ 55-60 psi, replaced plugs w/iridiums and hot coils, retorqued intake manifold to 105 in/lbs, and reset PCM to relearn itself. Car runs better than perfect even after setting this code, happens about every 250 to 350 miles on long road trips. All freeze frame data is within normal range. Engine has shorty headers on it with a 91 octane tune and ported throttle body, problem seemed to manifest itself after the headers were installed and took on long trip. Help!
@nadeem5476
Жыл бұрын
if both the trims are negative then is this a sign of a faulty or extra open injector?
@thesetruths1404
Жыл бұрын
Hello. 2003 Mitsubishi 3.8L V-6, 220,000 trouble free miles. Fuel economy is where it should be. LTFT 1&2 are +12.5% at hot idle. But goes to 0% and stays there when revved to 2,500 rpm. STFT 1&2 are 0% at hot idle. When extra fuel is sprayed on identified leak of intake manifold (leaking o-ring, I used smoke to find) the STFT immediately goes to -6 and then returns when the extra fuel is burned off. Could this intake air leak thats affecting both banks cause the truck to go into a limp mode, giving me these codes? P0335 P2135 P0340 Also, why does LTFT go to 0% when under load? Thanks!
@lupas20
2 ай бұрын
I feel like the drawn should of been different. I understand the reading of - means rich and + means lean. I would say the red ball should be on the rich side because of the reading I think it may give some confusion. When the problem is indicating a long term rich reading we will be around -15/-30 when our issue is found our short term will then run + because our issue is correcting and rebalancing back to our 14.7.1.
@larney37
2 жыл бұрын
It is amazing carbs work at all
@labradormcgraw
3 жыл бұрын
I'm trying to get my head around fuel trims. Would I be correct that a vacuum leak would cause the engine to run at a higher idle speed than normal? My logic says it would, but I've never heard of a high idle speed being a symptom of a vacuum leak before. Thanks for your help.
@ryans413
3 жыл бұрын
Yes I vacuum leak would cause high idle it’s air not being counted for by the Mass Airflow and would probably cause the rpms to jump around cause the computer can’t see the air volume as give the right amount of fuel needed. Plus it would effect fuel trims as well
@labradormcgraw
3 жыл бұрын
@@ryans413 Thanks for your help.
@ryans413
3 жыл бұрын
@@labradormcgraw No problem
@patkelley2190
Жыл бұрын
exhaust manifold leaks will cause a lean condition. Its unmetter air. When cold leak can be big and when hot it can be small or not at all. Cracks in the exhaust manifold, broken bolts, bad Gasket anything that will allow air in before the 02 sensor.
@nwreop
3 ай бұрын
I have a question. maybe this was explained and I missed it. So after the LTFT is set (say your LTFT is +18% and STFT +4%) is the total value of increase 22% fuel trim?
@alexk163
2 жыл бұрын
Hi, my friend, on my BMW I have STFT 18℅ and long term 11.7℅. What do you think is it air leak? Or a MAF sensor? Or O2 sensor?
@colchilibeck
2 жыл бұрын
First thing I would check for is an air leak.
@7150285
3 жыл бұрын
Let's say if u have a leak at the exhaust manifold before sensor 1. Will that cause the PCM fuel trim to add less fuel because the oxygen sensor is showing it's running rich? Because the exhaust gas the leaking out before passing thru sensor 1 therefore telling the PCM is no Oxygen is passing thru the O2 sensor.
@ryans413
3 жыл бұрын
Yes if the exhaust gas don’t pass through upstream O2 sensor and the downstream O2 sensor after the cat sees the same computer will think the cars not getting enough fuel and add more which it doesn’t need this will keep happening until the exhaust leak is fixed.
@7150285
3 жыл бұрын
@@ryans413 I thought it's the opposite. I thought exhaust gas contains some oxygen. And if it doesn't pass thru the upstream O2 sensor, it will run lean. Not rich.
@ryans413
3 жыл бұрын
@@7150285 yes that’s right my bad
@7150285
3 жыл бұрын
@@ryans413 actually. I think it really depends on each individual situations. Each situations differs.
@7150285
3 жыл бұрын
@@ryans413 All I know is O2 sensors measures the level of oxygens. Too much O2 means not enough fuel and is running lean.
@trealwilliams1563
2 жыл бұрын
I subscribe
@faisalnazir710
2 жыл бұрын
Thanks alot sir u did well for us... .sir I have camry 2007 2.4.....STFT -11.72 and LTFT - 19.53.....is it ok or what I will do ....I am in bahrain and here machanic is not well ....Thanks sir will wait for u good reply
@myasinxx43
2 жыл бұрын
I too had similar with LTFT going to 22.x, there was vacuum leak from break booster pushing more air via break-hose to intake manifold.
@AF1MIDS
3 жыл бұрын
Colin Chilibeck Good Afternoon and nice to meet you, is there any way you can make more videos continuing from this one to explain more deeper into STFT & LTFT to get a more deeper understanding and how to use it to diagnose any vehicle please? Also good job on the video you did very good :)
@exeivier7287
Ай бұрын
and what if i have a negative STFT and a negative LTFT ??? for example -10 STFT and -10 LTFT??
@anthonynicholls8010
Жыл бұрын
✌️✌️
@Constitutionallycorrect
4 ай бұрын
I think a good way to show would be a sliding weight scale at the doctor's office
@mobilecommunicationsnetwor5268
3 жыл бұрын
What happens during Cold startup? What data is accessed? Could you explain the FT and ST in these conditions?
@JBB1636
6 ай бұрын
My STFT is 8.7% and my LTFT is -2.3%, what does it mean by this? I mean, why the LTFT is not also positive?
@michaellongrie915
8 ай бұрын
Good example for a novice to get the jist of it...
@fortnitedaily1042
3 жыл бұрын
Hello, i have -15 to -20% long term fuel trims, and +25% short term fuel trims at idle. What can cause such a strange condition .
@colchilibeck
3 жыл бұрын
If it is positive for both long term and short term it could be a vacuum leak or lack of fuel (plugged injectors, weak fuel pump etc). When accelerating, if the short term goes More positive, check the fuel system. If the short term Drops, then check for vacuum leaks.
@fortnitedaily1042
3 жыл бұрын
@@colchilibeck sorry the long term fuel trims are -15 to -20%. And the short term fuel trim at idle is +25%
@colchilibeck
3 жыл бұрын
@@fortnitedaily1042 sounds like a possible vacuum leak. That’s the first thing I would check.
@fortnitedaily1042
3 жыл бұрын
@@colchilibeck Thanks for your replys, could be bad maf or bad o2 sensor since Ltft Are negative and Stft are positive? I have not found any vacum leak
@fortnitedaily1042
3 жыл бұрын
@@colchilibeck what do you think?
@Xantylon74
2 ай бұрын
But what if the O2 Sensor reads the mixture but it doesn’t correct it? Example: LTFT doesn’t move, staying by 0,0. STFT are positive as high as +24 at 700rpm but goes down to +3 or even 0 if the AC is on or the engine is running at 900rpm just 200rpm more? Why does the ECM not correct? Wide band O 2 Sensor, new, same problem as before. Normal O2 Sensor after the catalyst is reading 0,750v. when I take my foot off the gas after accelerating it briefly shows 0.0 volts on then goes back to 0.750-0.800 volts What is happening here? I get how LTFT and STFT work, but this makes no sense to me! If someone has an explanation for this please comment!
@automotivetipsbykamote2162
Жыл бұрын
Almost lost there.. Nice🤔😛
@pagepro211
3 жыл бұрын
this LTFT explanation doesn't make sense
@alenmihelcic8267
Жыл бұрын
I am not understand, sorry
@riflebear1711
15 күн бұрын
Thats not ok. Don't you ever not understand again. Got it?
Пікірлер: 125