In this one I show you a number of ways to go about rounding objects in SketchUp, from spheres, to wineglasses, to pipes! Enjoy! Plugin: Round Corner sketchucation.com/forums/viewt...
Incredibly well done! I started messing with SketchUp a few days ago after receiving a task in school to re-design our class tables. The curved pipe trick you show here is exactly what I was looking for. Thank you!!
@clementemery5922
8 жыл бұрын
Thank you for this really clear tutorial, you'r just open to me a lot of possibilities !
@mridgway12
9 жыл бұрын
You are not only an excellent designer but a very good teacher. Get to work on some more vids cause I really learned a lot :) Thank you!
@AaronBishopDesign
9 жыл бұрын
Matt Ridgway Stay tuned Matt. Just recorded one today.
@zakkzakk100
8 жыл бұрын
How are you bending the straight lines you have drawn with the pencil to make the wine glass? Thanks!
@dewaldbasson1304
6 жыл бұрын
I'm new to Sketchup but I must add, your tutorials are great. Keep it up!
@alimertc
5 жыл бұрын
I admire your work. it was very clear and fun to watch keep making videos like this!
@bentheboxer7788
8 жыл бұрын
Thanks Aaron, i found your tutorial to be very concise. Started here, but am sure to watch the others
@RJ-mr4qv
7 жыл бұрын
Hi from Siberia! Thank you, Aaron! Very clear and helpful. And very nice voice:)
@addee1425
8 жыл бұрын
I DOUBLE THAT!!! YOU CERTAINLY AN EXCELLENT IN TEACHING AS WELL AS DESIGN THANKS A LOT!
@duckdotexe2992
8 жыл бұрын
This video was incredibly helpful. Thank you for making it.
@zigydk
9 жыл бұрын
Excellent tutorial. Very pleasant to watch and listen. Thank you.
@davidismaelofficial
7 жыл бұрын
Excellent tutorial....Easy and precise!
@iliapitaoi4375
9 жыл бұрын
Wonderful demo and getting to like more of SketchUp!@
@YourMomsSideDude
6 жыл бұрын
My hero! Thanks for the help.
@michaellorenz6699
6 жыл бұрын
Oh hell yeah! Thank you soo much for this tutorial!
@carlosmunoztv400
8 жыл бұрын
Thanks for the post! It's very helpful!
@Jamanator9
9 жыл бұрын
Nice video man, really helped. I lost it when u drew that pipe, I've been trying so many things with the follow me tool and never thought of doing that.... -_-
@jeffharmed1616
7 жыл бұрын
Thanks for sharing. Useful little tips. I feel I must add a few of my observations about "follow me" exercises that do not work out because of "too much detail". The simple solution is to 1) make everything an object, 2) scale it up tenfold, 3) use follow me, and then 4) scale it down tenfold. It appears that scale has something to do with Sketchup's calculations.
@patricemorgentaler1801
6 жыл бұрын
well done my friend, keep up the good work! could you please explain how to draw a weld for metal work drawing?
@IgnatFi
3 жыл бұрын
Cool videos! Do you have one on creating that type of shapes (like the wine glass)? Thanks
@krochez
7 жыл бұрын
Thank you for the helpful information!
@EMarSounds
8 жыл бұрын
Thanks for the tutorial, I'm trying to create the metal arm for a Technics turntable, haven't got the angle right yet.
@Sylvchan
9 жыл бұрын
Thank you Aaron! This is an amazing tutorial! By the way, your choice of music is simply delightful! Would you mind sharing the titles and artist names with us? Thank you in advance!
@andrewhood5450
10 жыл бұрын
great tutorial. really helped thanks
@churchiesj
8 жыл бұрын
Hi Aaron, can this method be used for designing a car chassis, something like a 34 chev? Great tutorial well done !!
@HonestLeigh
9 жыл бұрын
Very helpful! Thank you.
@SFPV
8 жыл бұрын
How do you get that toolbar?
@evilgaming2259
6 жыл бұрын
Excellent tutorial.
@thehspace
3 жыл бұрын
Helpful. Thanks!
@peternilsson75
8 жыл бұрын
Great tutorial! Just a question: I can't find the drawing tool to make round edges on the path that you use e.g. at 7:47 into the video. Is that also a plugin tool or is that native? How do I get it?
@roGGeniusz
8 жыл бұрын
+Peter Nilsson It has slighty different icon now. It's name as Follow me :D
@GregJoshuaW
6 жыл бұрын
I believe it's the arc tool.
@lakshmiraj1787
6 жыл бұрын
very informative! thanks! :)
@SamNebaza
9 жыл бұрын
How does one access those plugins?
@baonguyen6591
7 жыл бұрын
Great Tutorial ! Thanks u
@ninosanchez8798
9 жыл бұрын
Thank you Aaron how can I make a perfect radious for example the pipes. the radius of the bend for precise corners in engineering models. Sorry I just started using this program and its a bit frustrating sometimes.. :(
@swallowedinthesea11
8 жыл бұрын
Pipes drove me mad! I was using it for a wall lantern, but I kept getting gaps for hours, even after viewing this tut. Searched the forum and saw that pipes with angles must be extended longer than the actual length because SKU gets confused and adds the unwanted gaps. After Follow-Me tool, just trim off the extra length with Push, Pull.
@phyliamorus
8 жыл бұрын
can someone please explain to me exactly how to know what offset to set to so I can have the shape I want in the Round Corner plugin?
@whiterockb.c.canada-fullgo8232
6 жыл бұрын
AARON, DO YOU HAVE ANY TIPS FOR CREATING A SHERE SHAPED SPIRAL, WITH A RECTANGLE SECTION AT 45 DEGREE ANGLE
@thereyson31
8 жыл бұрын
will this plugin work if my trial ended and sketchup make is on? and what's the difference between the two( pro and make)? sorry i'm just new at sketchup and i think you can help me. thanks! like your videos! nice work!
@howardgilmour8464
9 жыл бұрын
You are the Godfather of Sketchup ;)
@divyak9755
3 жыл бұрын
Just wow sir..
@TheFasfas123
6 жыл бұрын
very decent tutorial ....thank you
@scylla1776
6 жыл бұрын
Can you guys give me a suggestion of a good plug ins a beginner like me can use?
@djplayer142
8 жыл бұрын
You dont have to use the eraser to delete the corner after you make the arc, just double click the point where to make the arc, at the pink line and it will erase automaticaly the corner :)
@jamalalfalahy6360
8 жыл бұрын
Nice job
@remacp
9 жыл бұрын
Very good video
@Alex-wx6vn
7 жыл бұрын
Hey im fairly new to Sketchup, but need to use it fr a school project. Just wondering how you made the "curved lines" at 7:45 You sort of connected two of the straight lines then did a shortcut i would assume, which allowed you to connect them with a curved line. Edit: I managed to fix that issue, but i have a new one :D When i use the follow me tool i cant get them to follow the lines i made, what do I do? Hope you can get back to me soon! Thanks for this amazing tutorial by the way. Take care. -Alex
@nicmclean2772
6 жыл бұрын
After you've made your circle at the start of your 'pipeline', use the normal pencil tool to draw straight lines roughly in the direction you want the pipeline to go. Then to curve the corners of your straight lines, use the 2-point arc tool. With the 2-point arc, click the two points where you want the curve to start and finish along the line you drew, then your last click will adjust how deep you want your curve to be :) Hope this helps!
@timmylassie6763
8 жыл бұрын
i am getting this message undefined method `collect' for nil:NilClass using mac osx sketchup pro what am i doing wrong... the apply checkmark floats around and doesn't look like the youtube video...?
@fabianchapa4000
10 жыл бұрын
This is super helpful. Thanks. I want to make a tomato. Would you show me how and what tools to use? Thanks again.
@AaronBishopDesign
10 жыл бұрын
Organic shapes are a little harder in SketchUp, I can try and tackle this for you in a future video.
@paolocaminati5619
9 жыл бұрын
good tutorial, i have also is this program very very gooood!
@emileogier
8 жыл бұрын
Thanks!
@abdillahazizi4089
6 жыл бұрын
i only have basic tools, how can i find that tools, like your's
@OnlyOmari
6 жыл бұрын
can you send me your sketch up plugins?
@I-Love-Taylor-Swift
7 жыл бұрын
How do I draw the curved lines on the pipe (I'n VERY new to Sketchup)?
@prettyhussain12
6 жыл бұрын
I Love Taylor Swift follow me tool.
@nicmclean2772
6 жыл бұрын
After you've made your circle at the start of your 'pipeline', use the normal pencil tool to draw straight lines roughly in the direction you want the pipeline to go. Then to curve the corners of your straight lines, use the 2-point arc tool. With the 2-point arc, click the two points where you want the curve to start and finish along the line you drew, then your last click will adjust how deep you want your curve to be :) Hope this helps!
@hemantkokate5768
6 жыл бұрын
Can you please make a video for making a perfect pillow..?
@agilliam1980
8 жыл бұрын
Ive tried this so many times and it wont work for me. I have tried using sketchup 2015 and 2016. When I do this it wont do ANYTHING at the bends or elbows, but resumes just past the elbows. Wish I could attach a picture, but no matter what I try, I cant get it to work, I don't know if its because I'm doing this in metric and small sizes or what.
@wildron41
8 жыл бұрын
education videos are the future.
@majmaj349
8 жыл бұрын
perfect
@anthonybvisualization6732
8 жыл бұрын
wow thanks alot
@abrog8r
10 жыл бұрын
Aaron, I am in Sketchup 8 and trying to download "Round Corner" as narrated in the Tutorial. The App doesn't exist in Sketchup 8; how can I work around this omission?
@AaronBishopDesign
10 жыл бұрын
It should exist, I was using SketchUp 8 for this video. Here is a link to the plugin: sketchucation.com/forums/viewtopic.php?f=323&t=20485#p171721
@peternilsson75
8 жыл бұрын
thanks for your reply, but I don't mean the follow me. I was thinking of the tool that looks like the pen tool in Photoshop, the tool that is used to draw a bended curve.
@nicmclean2772
6 жыл бұрын
After you've made your circle at the start of your 'pipeline', use the normal pencil tool to draw straight lines roughly in the direction you want the pipeline to go. Then to curve the corners of your straight lines, use the 2-point arc tool. With the 2-point arc, click the two points where you want the curve to start and finish along the line you drew, then your last click will adjust how deep you want your curve to be :) Hope this helps!
@sameeulislam9597
5 жыл бұрын
you saved my life.
@yasiriqbal9176
10 жыл бұрын
sir i have problem i am making windows and doors in round building but failed kindly help second prob is kindly help me in downloading pluginns
@missdoll476
7 жыл бұрын
you use source filmmaker?
@AaronBishopDesign
7 жыл бұрын
I do not.
@johnbullnyemi2324
8 жыл бұрын
pls i need to no how to donwload or add my plugins tanks
@asmasoufi2883
7 жыл бұрын
god bless you
@Bobg425
5 жыл бұрын
Been trying for hours to draw a 50mm stainless curved handrail corner.Duh.Thanks a lot for this vid.
@chaicatty
6 жыл бұрын
4:20 mins what is the tool you use to change the pencil line into a curve? This is why I was watching the video, and you don't show it
@nicmclean2772
6 жыл бұрын
After you've made your circle at the start of your 'pipeline', use the normal pencil tool to draw straight lines roughly in the direction you want the pipeline to go. Then to curve the corners of your straight lines, use the 2-point arc tool. With the 2-point arc, click the two points where you want the curve to start and finish along the line you drew, then your last click will adjust how deep you want your curve to be :) Hope this helps!
@6400loser
8 жыл бұрын
how did you draw the wine glass base? argh!!!!
@TheMafin10
8 жыл бұрын
+6400loser looks like he mostly used the arc tool... you could just draw it roughly with straight lines first,like he does in the video, and then refine it with the arc tool!
@agilliam1980
8 жыл бұрын
Figured out what it was... Sketchup isn't smart enough to handle smaller sizes. So for example I was trying to model a 1.5mm rod and bend it for servo (just for schematic purposes) and it wont do it. If I increase scale to huge, it works.. Cant get it do to smaller size though :( Guess I need to find a diff prog.
@jpkk7212
7 жыл бұрын
round corner doesn't work in 13 pro
@vanlangen
9 жыл бұрын
Too bad you need to 'jumping through hoops' with plugins for this...
@021liman
5 жыл бұрын
too much extensions
@awparran09
8 жыл бұрын
while his presentation is excellent, as a begìnner it was very fast, i'll have to take my brain out and plug it into the presentation.
@bernhardmair1171
9 жыл бұрын
I clicked dislike on this mainly because it does not need a plug-in to make a sphere. (Half-circle following a full circle, which are 90deg to each other and you got a ball.) I agree that the/a plug-in makes more complex design easier.
@arkrahbdo530
4 жыл бұрын
Not very useful at all. You are just showing us how to do it and not teaching how to do it tbh
Пікірлер: 88