Thanks for showing us the mistakes too. You watch all these videos and when you mess everything up the first time you try, and you watch all of these perfect videos (which I know they don’t always go perfect “, you start to feel like you can’t do anything right! In reality, it does take some mistakes to perfect these things! I have lightened up a lot! I appreciate your videos, a lot!
@AngieHolden
Жыл бұрын
Thanks for watching!
@sheilawiard2077
2 жыл бұрын
Thank you for finding a solution to be able to due different sizes of blanks in the mug press. I think Cricut missed the bar by making this heat press for only certain height blanks. I would love to see them make a larger press to do the full tumbler without having to turn it over. Moving forward with this method, I will certainly follow your instructions!!
@AngieHolden
2 жыл бұрын
I would definitely love a taller press from them!
@maryjanewill3056
2 жыл бұрын
Great video, 👍
@barbmcconville2741
Жыл бұрын
I judged wanted to thank you and mr crafty pants about doing tumblers in the Cricut mug press. Turned out FABULOUS, small issue with seam, totally my fault. Infusible marker and heat gun fixed it THANK YOU THANK YOU THANK YOU!!!!
@AngieHolden
Жыл бұрын
Happy to help!
@mandylevasseur3807
2 жыл бұрын
I honestly don’t know what I would do without your videos. 🥰 your a true crafting guru
@AngieHolden
2 жыл бұрын
Thank you!
@MiniMeags
Жыл бұрын
I had no idea the mug press didnt automatically tighten to the pressure needed Thank you so much
@lollybaezcolon7190
2 жыл бұрын
I follow someone that never uses inserts and the heat alone works amazing!
@AngieHolden
2 жыл бұрын
I haven't had success without the pressure.
@misslitaatl
Жыл бұрын
Thanks for letting us learn from your mistakes before we waste all of our blanks. Great video!
@AngieHolden
Жыл бұрын
My pleasure!
@ShelleyCordes
Жыл бұрын
Thanks for the insert link for the skinny mugs! I am a new member. Can't wait for more videos. Thanks😁
@tashanadaley2224
2 жыл бұрын
So I tried it and it worked. However I did notice the water mark when using the infusable ink as you stated. You truly are a 💎
@melissahanson6003
2 жыл бұрын
Thank you! I have been looking for a hack for my Cricut Mug Press with skinny tumblers!
@brittanyyoung7715
2 жыл бұрын
I LITERALLY asked this question on Facebook and looked for a video about this YESTERDAY. You truly are my favorite and thank you for listening to the crafting Gods because I needed this
@AngieHolden
2 жыл бұрын
I have been trying for what seems like FOREVER but I think I am finally happy with this!
@Rayansway2015
Жыл бұрын
I only just came across your channel, but I like how thorough you are in explaining things clearly. Definitely subscribing.
@robertkahovec3451
Жыл бұрын
I just used on the 20 oz. And it was fine !! Just a little fading at the top so will hold up a bit when I close. Thanks for the tips.
@AngieHolden
Жыл бұрын
Good stuff!
@carolpratte17
2 жыл бұрын
Thank you!! I followed your process and my skinny tumblers turned out amazing!!! I'm so excited to finally know how to make beautiful tumblers using my Cricut Mug Press.
@AngieHolden
2 жыл бұрын
YAY!! So happy to hear that!!
@thelastwin
Жыл бұрын
Great info! Ordered the inserts from your link! Also subscribed😊Thank you
@AngieHolden
Жыл бұрын
Thanks for watching!
@melbradley676
2 жыл бұрын
Just thought I would say I have used a silicone baking mat cut up and put around in layers to close the gaps for the skinny tumblers and/or anything else that is too small for sublimation with printed infusible ink. It worked just fine. Maybe test that out on a video sometime to see if you get good results as well.
@Aukena
2 жыл бұрын
I was just wondering about that
@tashanadaley2224
2 жыл бұрын
Thank you love this. I saw someone use a skewer under the tumbler when flipping to heat up the top. It actually worked
@AngieHolden
2 жыл бұрын
Great tip!
@tashanadaley2224
2 жыл бұрын
@@AngieHolden now I'm really going to get the mug press lol thanks for the tutorial. 🥰🥰
@tashanadaley2224
2 жыл бұрын
@@AngieHolden so today I tried using the sublimation ink print the tumbler came out flawless 👌🏾 thank you again
@sylviathomas7482
Жыл бұрын
You are Awesome 👏 👏👏Thank you for helping me to understand all of this❣️
@AngieHolden
Жыл бұрын
Happy to help!
@carriejeanne3038
2 жыл бұрын
This video couldn’t be better timed, I purchased some 20 oz skinny tumblers and then realized they’re too small for my Cricut mug press. Placed an order for the inserts, can’t wait for them to get here so I can get started. Thanks, Angie!
@AngieHolden
2 жыл бұрын
Yay! Happy to help!
@chrislee6076
Жыл бұрын
Thank you for this! I just asked for this on a different video of yours!
@cathydownes8757
8 ай бұрын
I am going to try these inserts with stitched neoprene stubby coolers....fingers are crossed, I use an insert in them as well
@AngieHolden
8 ай бұрын
I haven't had any luck with that!
@christeenlaiwa2354
2 жыл бұрын
Woo hoo! Of course you figured it out!
@tobitaruiz5963
Жыл бұрын
Hoping Circut comes out with an option to press tumblers because for the price it is my opinion that the process should be less complicated when using the mug press.
@jocelynjones2035
Жыл бұрын
Finally I've found what's wrong. I've gone through 7 tumblers and they all have those watermarks and I couldn't figure out where it was coming from. I'm doing sublimation and the mats and every single tumbler has come out with those marks
@brendalawrence6732
2 жыл бұрын
I love that watermelon print, so cute! This was such an informative video Angie. As always you show everything and explain everything so well. Thanks for that! Hugs, Brenda
@AngieHolden
2 жыл бұрын
Thanks so much! 😊
@sherilewis1058
Жыл бұрын
Thank you so much for this video!! I feel so much more confident in making a full wrap tumbler ☺️!!
@AngieHolden
Жыл бұрын
Thank you so much!
@gerryannbrown9645
2 жыл бұрын
Thanks, Angie, Great solutions for them using different size items. Have a great day!
@elizabethb2503
2 жыл бұрын
I was REALLY rooting for the camp mug!!😭 I want those so bad. Excellent tutorial. I haven't seen the mug press IRL, but it looks like a button on the bottom where the mug sits, so upside down, it would go around that & lower in the machine missing full heat. Never thought about it before seeing this. Thank you!!
@AngieHolden
2 жыл бұрын
Correct! That is exactly what happens! I wanted to try it with it all the way down just to test but definitely picking up works better!
@CherylFoster52
2 жыл бұрын
This is great ❤ I use my silicone mat that I order for my epoxy it came with two mats so I use one for my tumblers.and I figure out a few more great tips. I use a metal stirrer to lay down on the bottom plate
@rosalindalozano233
2 жыл бұрын
Please explain the metal stirrer 🙏
@CherylFoster52
2 жыл бұрын
@@rosalindalozano233 I place the metal stirrer on the bottom of the metal plate it keep your tumbler from going all the down to the bottom, it help you also got a even press for the top of your tumbler
@AngieHolden
2 жыл бұрын
Interesting! I was fine just picking mine up a bit and closing the press.
@CherylFoster52
2 жыл бұрын
@@AngieHolden yes I do mines like that sometimes but I forgot one time so that's how I came across doing like that, I learn so much from you
@AngieHolden
2 жыл бұрын
Awe! Thanks!
@raenicole9519
2 жыл бұрын
I was hoping you would do a video on this and you did not disappoint! Thank you!!!!!
@AngieHolden
2 жыл бұрын
You are very welcome!
@rosalindalozano233
2 жыл бұрын
Glass works as long as you heat the glass before you sublimated. I fill with warm water for a few minutes and dry thoroughly) I've had no problems.
@AngieHolden
2 жыл бұрын
I have just decided not to recommend it as there have been several issues.
@ritawhite596
2 жыл бұрын
Thank you for this simple fix. Can't wait to try
@MsBabylu
2 жыл бұрын
Great, I just ordered these, they should be here tomorrow. Thank you
@AngieHolden
2 жыл бұрын
Good luck!
@loiseubank7749
5 ай бұрын
Awesome, thank you
@AngieHolden
5 ай бұрын
You're welcome!
@Bitsandpeices
2 жыл бұрын
Thanks for sharing a well taught video 😊
@AngieHolden
2 жыл бұрын
My pleasure 😊
@Lzamora1
2 жыл бұрын
Thank you so much for these informative videos. Straight to the point and easy to follow along. I’ve learned so much from your videos.
@AngieHolden
2 жыл бұрын
Happy to help!
@sandradowell9666
2 жыл бұрын
Thank you so much! I have been using a different method but you have to turn it a million times and it takes about 30 minutes to make one! I have put an order in for some silicone wraps and will be off to the races once I get them!
@AngieHolden
2 жыл бұрын
Glad it helped!
@thePhxPrincess1
2 жыл бұрын
Great tips and mine turned out beautiful. Your instructions were perfect to follow. Thank you for the assist!
@AngieHolden
2 жыл бұрын
Glad it was helpful!
@GayleDoesDIY
Жыл бұрын
Thanks for explaining those imperfections, I was wondering why I got those warped bubbles when I use the insert with infusible ink sheets
@notimetowork
Жыл бұрын
You're amazing, you always have such great ideas!
@auntienikkisgamin9251
2 жыл бұрын
Great video I really haven't used my mug press since Xmas so I'm willing to try and signed up for the class
@AngieHolden
2 жыл бұрын
Yay! So glad!
@lollybaezcolon7190
2 жыл бұрын
Angie, on the top it’s easier to tape it pressing the paper inside the cup this way it will sublimate on the rim.
@AngieHolden
2 жыл бұрын
I did that on the second one!
@lollybaezcolon7190
2 жыл бұрын
I love all your tutorials! Thank you!
@denisejohnston6243
2 жыл бұрын
thanks for the video, just bought one today,,cant wait to try
@AngieHolden
2 жыл бұрын
Hope you enjoy it!
@kimison6084
2 жыл бұрын
I used these wraps & they are great!!
@AngieHolden
2 жыл бұрын
So happy you liked them!
@lollybaezcolon7190
2 жыл бұрын
If you put a medal stirrer or butter knife when you flip the cup, that helps.
@amandasmolinsky2246
Жыл бұрын
To fix your seam you need to cut the excess white from your sheet before wrapping
@lynda2483
2 жыл бұрын
Great video, Angie. Thanks for sharing!
@AngieHolden
2 жыл бұрын
Thanks for watching!
@scuevas1023
2 жыл бұрын
Excellent tutorial!
@AngieHolden
2 жыл бұрын
Glad you liked it!
@TraceyHazel4308
2 жыл бұрын
Thank you. This was great. Can’t wait to try this.
@AngieHolden
2 жыл бұрын
Hope you enjoy!
@SheWritesHerJourney_
2 жыл бұрын
I love this, such a great breakdown!
@AngieHolden
2 жыл бұрын
Glad you enjoyed it!
@loismthompson3918
2 жыл бұрын
Thanks for this info.
@AngieHolden
2 жыл бұрын
No problem!
@creiamoinsieme
Жыл бұрын
Grazie per le tue idee
@lanegralapaz9897
2 жыл бұрын
OMG Yess, thank you!!!
@AngieHolden
2 жыл бұрын
You are very welcome!
@kathrynwiford874
2 жыл бұрын
Ordered the wraps, followed all your instructions precisely, and I LOVE MY NEW TUMBLER!!!! THANK YOU!!!! LOVE LOVE LOVE all your videos and hard work! Question . . . How do you print a full tumble wrap thru Design Scape? I had to print twice and tape.
@AngieHolden
2 жыл бұрын
I don't use Design Space to print. I have a video coming up with some other free options!
@angelquade2590
Жыл бұрын
Just an FYI, saw another video where they tried infusible ink on tumbler, flipping it like you in Cricut Mug Press and it did the same as yours. They think the heat reheats the infusible ink when flipped and fades it and makes those markings.
@AngieHolden
Жыл бұрын
Something DEFINITELY happens with the Infusible Ink that is different.
@sunismoo
Жыл бұрын
Thanks!
@MyNailsandMorebyJohna
2 жыл бұрын
great teaching video again
@AngieHolden
2 жыл бұрын
Any time!
@MyNailsandMorebyJohna
2 жыл бұрын
@@AngieHolden you are welcome honey
@mrsdizi1234
12 күн бұрын
Can you use a shrink wrap on this? Thanks Angie for all you knowledge.
@AngieHolden
11 күн бұрын
No need for shrink wrap with a mug press!
@winterstar4813
Жыл бұрын
you are so awesome wow
@jennalmonte8290
2 жыл бұрын
Am loving this. Could you shrink wrap to ensure no ghosting happens? I won’t get my sleeves until Wednesday- cannot wait to try!
@AngieHolden
2 жыл бұрын
There really isn't any reason to shrink wrap if using this method. Shrink wrapping is to apply pressure when using a convection oven.
@minitorestrepo7233
2 жыл бұрын
I signed up already.
@AngieHolden
2 жыл бұрын
Yay! See you there!
@BigSister56
2 жыл бұрын
Angie when will they be bring out a new mug press that does more than just mugs
@AngieHolden
2 жыл бұрын
I seriously have no idea if that is even going to happen?
@bessiegoldsmith9210
2 жыл бұрын
Have you ever tried acid etching on glass tumblers instead of sublimation.
@AngieHolden
2 жыл бұрын
Try this: kzitem.info/news/bejne/pKuHzWSEbnmElYo
@kristinehowe7811
10 ай бұрын
I was wondering if you were able to figure out a way to stop the moisture issue when using infusible transfer sheets?
@AngieHolden
10 ай бұрын
I wasn't. These pads seem to hold a ton of moisture.
@dnecey32
2 жыл бұрын
I have made several skinny 20oz tumblers in my cricut mug press but I don’t use anything on it like a wrap the wall isn’t even touching the tumbler and it comes out perfect I do 3 minutes on one side turn it then flip it and do the same thing
@AngieHolden
2 жыл бұрын
I never have good luck like that!
@dnecey32
2 жыл бұрын
@@AngieHolden it took me a few tries but I think it was because I didn’t have it taped right enough I didn’t steer out doing it this way my friend does it this way and they come out perfect idk how but they do lol
@aliciabliss1220
Жыл бұрын
Do you have a video showing how you printed your sublimation prints for the 20o tumbler? Currently struggling with this.
@AngieHolden
Жыл бұрын
Try this: kzitem.info/news/bejne/zJyj4KaCp5WYm6A
@RainorShine1
Жыл бұрын
Walh makes a horizontal auto press wonder if that would be better for 20oz tumblers
@AngieHolden
Жыл бұрын
Not sure!
@lindakent5853
2 жыл бұрын
Great video. Would you suggest getting 2 sets of inserts and swap them out instead of using the same one?
@AngieHolden
2 жыл бұрын
I guess you could as they do get really hot.
@pattibaileydesigns
2 жыл бұрын
Great video Angie! Thanks for finding a product that creates that tight fit we need. You mentioned that when you flip the skinny tumbler, you should lift it slight off the bottom of the press. Shouldn't you do that for both the top and the bottom so neither end touches the bottom? If not, can you explain why? Thanks so much and again, great video - as always! :)
@AngieHolden
2 жыл бұрын
It is fine to touch the bottom plate. However, when you flip it, the tumbler is open and will NOT touch the bottom plate but instead go around it. So it actually goes in LOWER than the tumbler inserted with the bottom side down.
@pattibaileydesigns
2 жыл бұрын
@@AngieHolden That makes sense! There have been other videos out there saying to lift it but never explained why.
@lucypagan3969
5 ай бұрын
I love the watermelon look Is there a certain press that you can make several sizes or would I have to purchase a mug press and a tumbler press sorry I am a newbie to all this. Thank you
@AngieHolden
5 ай бұрын
Yep I would try this press: kzitem.info/news/bejne/26Rjzn6AiWdlqHY
@tammybishop8239
2 жыл бұрын
Is there a video that shows how to print the watermelon wrap and what program to use?
@AngieHolden
2 жыл бұрын
Try this: kzitem.info/news/bejne/zJyj4KaCp5WYm6A
@mariangurney977
7 ай бұрын
Thanks for this video. Just starting out with sublimation. I'm doing my first tumblers this weekend. Question, when you did the 2nd pass at the tumbler and taped the image inside the tumbler, did you add protective paper inside to prevent bleeding into the mug press? Thanks
@AngieHolden
7 ай бұрын
I am not sure what this references but anything inside wouldn't bleed out to the mug press sides.
@tamzynkitto7107
Жыл бұрын
Hi, I love your channel and have had great projects with your tutorials :) Where you had issues with the whole sheet of infusible ink and the moisture marks, do you think smaller images that were weeded and cut out then taped onto the skinny tumbler would work better? Thankyou x
@AngieHolden
Жыл бұрын
Yes I think smaller images would be better!
@ishaniastanley8538
2 жыл бұрын
Could you share with me the measurements you’re using for the skinny Tumblr
@AngieHolden
2 жыл бұрын
I downloaded that watermelon file from Creative Fabrica and it was already the right size. I just printed it!
@lynnkaufman9006
Жыл бұрын
could you use shrink wraps to hold the sublimation paper in place?
@AngieHolden
Жыл бұрын
I would not. It will likely melt in a press like this.
@anngillespie2677
Жыл бұрын
What if the inserts were heated with a press before it goes in the mug press? Would that help get rid of the moisture?
@AngieHolden
Жыл бұрын
Not sure! It didn't seem to make a difference when I was making several in a row.
@cesiahernandeznava2892
Жыл бұрын
Why do you use protective paper? What happens if you don't use it?
@AngieHolden
Жыл бұрын
You run the risk of getting ink on the inside of your press.
@SunshineEdma
Жыл бұрын
I'm sorry. what is the purpose of rotating the tumbler?
@AngieHolden
Жыл бұрын
The area that is intended for the handle will not sublimate.
@jerriling4083
2 жыл бұрын
Would using a silicone tumbler sleeve possibly work instead of the inserts?
@AngieHolden
2 жыл бұрын
I actually JUST saw these yesterday. I am not sure!
@carynclark3868
10 ай бұрын
Loved your video but have a question. Using infusible ink transfers on a stainles steel tumbler do you have to use a longer time for it. I tried and it didn't hardly show. I was using the inserts which are great. Help please
@AngieHolden
10 ай бұрын
With this press, it is sometimes tough to dial in how much time you need. You may need more depending on the blank.
@73ondrea
Жыл бұрын
Any plans to do another Sublimation Camp?
@AngieHolden
Жыл бұрын
Yep! It will be in May!
@1111joey
10 ай бұрын
What’s the biggest Tumblr that will fit in the machine
@AngieHolden
10 ай бұрын
I have a video here with more: kzitem.info/news/bejne/t65j1WeBoaZmkoY
@joannamatamoros9792
Жыл бұрын
Hi Angie have you tried the silicone sleeve on the skinny tumblers 😫
@AngieHolden
Жыл бұрын
I have not.
@Emily-dg6rc
Жыл бұрын
Can you do glassware?
@AngieHolden
Жыл бұрын
I would not do glass in the Cricut Mug Press.
@Emily-dg6rc
Жыл бұрын
@@AngieHolden Thanks Angie ! :)
@haideemeza6016
2 жыл бұрын
I love all your videos. ❤️ what is the best iron on for shirts that last long. Please ?
@AngieHolden
2 жыл бұрын
Try this: kzitem.info/news/bejne/16Vq32Gdaqxje44
@haideemeza6016
2 жыл бұрын
Thankyou so much. You’re so helpful 😊
@martiwieland4757
2 жыл бұрын
I would love to know about your tape dispenser.
@AngieHolden
2 жыл бұрын
I have linked it in the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.
@cici0217
2 жыл бұрын
Wow great video. I've been wanting to learn about sublimation. I've learned that you need sublimation blanks like cups, tumblers etc. But stainless steel camping mug, not coated for sublimation and it still worked.. I'm confused
@AngieHolden
2 жыл бұрын
The camping mug I used was coated for sublimation. The sublimation coating can be clear.
@jlc1023
Жыл бұрын
Hi! Thanks for the video! Can I ask where you got those shelves in the background? I'm looking for cricut/printer storage like this. TIA!!!
@AngieHolden
Жыл бұрын
Try this: kzitem.info/news/bejne/zI2Xu31mm5h5o5w
@carolyncoleman1962
6 ай бұрын
Do you think the infusible ink would work better/ avoid marks if the inserts were preheated in the mug press before adding the tumbler? I don’t have a sublimation printer…
@AngieHolden
6 ай бұрын
I have found that the inserts hold moisture regardless.
@carolyncoleman1962
6 ай бұрын
@@AngieHolden ok, thank you!
@JanineMKartist
10 ай бұрын
does the fluted lattes mugs work in the mug press?
@AngieHolden
9 ай бұрын
no it does need straight sides.
@jennifercooper4819
2 жыл бұрын
Thank you for this awesome video. I thought there was supposed to be an update that allows you to use the whole area for your design. I am only allowed to make my design 6.75 x 9.25 and I need it to be bigger. Also, when I'm trying to print more than one smaller design on a page I have a lot of wasted space causing wasted paper. I hope that makes sense! Help!
@AngieHolden
2 жыл бұрын
That is the maximum with Cricut currently.
@jennifercooper4819
2 жыл бұрын
@@AngieHolden what software then would you recommend?
@starrspoter
Жыл бұрын
why do u have to rotate it? dosent it do the hole bottom in one go? on both sides?
@AngieHolden
Жыл бұрын
There is a gap in the front when you close it. It is for the handle of the mug. In this case, we want to do a full wrap so we would need to rotate to sublimate that strip.
@raenicole9519
2 жыл бұрын
What measurement (template size) did you use for the skinny tumbler?
@AngieHolden
2 жыл бұрын
I downloaded that watermelon file from Creative Fabrica and it was already the right size. I just printed it!
@tracicrain2161
Жыл бұрын
What do you use to print your sublimation inserts?
@AngieHolden
Жыл бұрын
I have a variety of sublimation printers. You can see more here: kzitem.info/news/bejne/2YJ9zY6gfKl6aI4
@krubiog2505
2 жыл бұрын
hi i love your videos!! very helpful although I have a issue, i have purchased many brands on 20oz straight tumblers and in all of them the paper gets stuck on the tumbler really bad, i cant even peel the paper off. I see on your video the paper comer right off, what am i doing wrong??? have tried this so so many times with less time, more time and all my results are the same, hope you can help me, Thanks
@AngieHolden
2 жыл бұрын
I have never had that issue on a 20 oz tumbler. You can get the paper wet to get it off.
@glazersworldakamaryschmitt8811
2 жыл бұрын
I know you said you aren’t great with the seams but how would you go about getting that lined up properly? Should the paper overlap or line up edge to edge when you wrap it around?
@AngieHolden
2 жыл бұрын
I do a slight overlap a lot as I personally do better with that. To line up properly, cut the bottom of your paper straight so that you can rest is on the table as your wrap around with your tumbler standing up. Then the entire thing will be straight.
@whitetwilightph
Жыл бұрын
Hi! I would simply like to ask if your Cricut mug machine emits smoke during heat pressing?
@AngieHolden
Жыл бұрын
Generally no. However, it can emit moisture or steam depending on what you are pressing and these inserts do have quite a bit of moisture.
@1120forevrr
2 жыл бұрын
If you ever for example press for a longer time will it be ok or mess up the project??
@AngieHolden
2 жыл бұрын
You can mess up a project by overheating.
@kpluse
Жыл бұрын
If I don't have a sublimation printer, could I use a full-size infusible ink page for a design (just not as fancy)?
@AngieHolden
Жыл бұрын
Yes you can.
@bkbrp64
2 жыл бұрын
Great information! Question, though. Are you suggesting ONLY using sublimation prints and not the infusible ink? I don't have a sublimation printer unfortunately and it's not in the budget at this time. Can you buy pre-printed sublimation sheets by any chance? Also, on your camp for May 12-14...I'd like to join, but have to work. Can I watch later, or do I have to purchase the All Access Pass to watch later? Thanks!!
@AngieHolden
2 жыл бұрын
You can buy pre-printed sublimation sheets and those may work better! I didn't have any luck with Infusible Ink and wanted to be honest about that. If you can't watch during the camp days, you do need an All-Access pass to get extended access.
Пікірлер: 286