After looking through a dozen slide issue problems oh, this is the first one that went beyond the basics that didn't involve an entire takedown. Thank you so much for the information!
@TunedRAMS
Жыл бұрын
Glad it helped!
@WN_Byers
10 ай бұрын
I viewed many others, but this video was the first to help me too. Thank you
@thomasfox8027
Жыл бұрын
Dude. I literally CANNOT thank you enough for this. I was going CRAZY trying to put the slide back on after taking the fire control unit out to switch over to a Wilson Combat Grip Module. The sear was flipped up and i had ZERO clue what caused it much less how to fix it. I am happy to report everything is now back together and functioning perfectly now! Before finding your video i was thinking i was going to have to fo to a gunsmith with my head hanging in shame. THANK YOU SO MUCH!! Automatic subscription thrown your way!!! Haha
@TunedRAMS
Жыл бұрын
Sweet!!!! Glad this helped! When it happened to me, I was like OK what am I doing wrong, then I read on a bunch of forums that it was difficult, and I decided to make a video on it, so I’m glad somebody benefited from it! Thanks for the sub 💪🏼
@williefelder5912
Жыл бұрын
Duuuuuuuuude!!!!!!!! You just save me from throwing this fcu out of the window!!!!!! Thanks!
@TunedRAMS
Жыл бұрын
I was there too man!! Glad this helped!!
@jaredh9463
Жыл бұрын
I posted a while ago that your directions fixed my seer being up and I had the seer pop up again today. Unfortunately this time around, pulling up the pin slightly 1/16 of an inch or 1/8 of an inch did not allow the seer to go down. After messing around with it well looking into it with a flashlight, I found out if the takedown lever arm is pulled up on the rear side ever so slightly while you push down the seer, that allowed the seer to go down. On mine, the arm when all the way down either keeps the seer up or keeps it down because there is a catch leading over to it. I believe the reason why pulling the safty pin up (or whatever pin the safety lever rotates around) might be because when you pull up the takedown lever arm it also pulls up the very pin that you are pulling up on. Because of that the pin also needs to be pushed down or the seer will fall out just as soon as you jostle anything round. With that said, if you are careful to hold down the pin and the takedown lever arm at all times The seer should never go up and the safety lever should never fall out. That's my two cents and again thank you for the helpful video.
@TunedRAMS
Жыл бұрын
Yessss!!! That’s a fact, got to squeeze and keep these FCU’s together lol once that arm comes out it’s a fight!! Good input sir!
@ArmedVeteran1987
11 ай бұрын
The sear for mine was up after removing the safety. Took the ping out like you said, it moved just a little bit after messing with the slide lock and the take dow lvl I figured out. You gave me the right information. Thank you man.
@markkistler5385
9 ай бұрын
I've been searching on KZitem and you took it past what others were showing about the sear coming up. Thanks so very much. Blessings Bro.
@TunedRAMS
9 ай бұрын
Glad it helped my man 💪🏼
@RyansMods
4 ай бұрын
Bro this video helped me so much! I switched grip modules on my xmacro and I just could not get the slide to go all the way back. Your video fixed my issue. Can't thank you enough
@TunedRAMS
4 ай бұрын
Nice!! It can be a pain… glad it helped!
@daledoback9566
11 ай бұрын
0:48 YES. FINALLY. That’s lining up to my issue so far. The amount of different ways I’ve tried looking this up is ridiculous, and it seems like almost everyone was having more basic and different problems. I really hope this is it, but I like what I’m seeing so far
@TunedRAMS
11 ай бұрын
How’d it go??
@tires2burn
Жыл бұрын
Had this problem and fixed it but wish I would have seen your video first. TWO HOURS to get it operational. I saved this for future use. THANKS
@TunedRAMS
Жыл бұрын
Ha it took me a while the first time too! PITA
@thegunnersdirtyworkbench6824
7 ай бұрын
After an hour looking for answers. You definitely saved me brother. I got it fixed with your instructions, worries me to ever take it apart to clean it. Bad on Sig for this crap!!! Maybe I can super glue it together. lol 😂
@TunedRAMS
7 ай бұрын
Glad it helped bro! It is crazy how quickly it falls apart, just got to squeeze it and pray nothing shifts during re-entry 😆
@randymoreno9345
2 ай бұрын
You’re a life saver. Thanks!
@TunedRAMS
Жыл бұрын
Remove the receiver pin AFTER slide comes off, I made a mistake. Sorry about that. I get ideas and slap them together at random intervals
@puma51921
8 ай бұрын
What a jigsaw puzzle
@TunedRAMS
8 ай бұрын
It really is, a pita
@jasonlemmond3012
Жыл бұрын
Every time that happened I’ve thought that the takedown bar was falling out and so I pulled the bar and everything out I didn’t realize it was just the sear
@debrafter9792
11 ай бұрын
Thank you for this video! This helped!
@internettex132
Жыл бұрын
Is that little spring really necessary? I found it on my table and had no clue where it came from. lol. I can't get it back on
@TunedRAMS
Жыл бұрын
I’m sure many have lost it and don’t even know they have. As long as your pin doesn’t fall out you prob don’t need it. It falls out on one of my guns and stays on another, should have been a snap ring of some sort
@vectex
9 ай бұрын
If you keep the takedown lever up before taking out the FCU, the bar should not come out.
@duconce
9 ай бұрын
A c-clip is a locking clip, there would be no way to remove or install the main pin on the frame. If you push the pin out from right to left your only pushing thepin out through one groove
@TheHumbleBelgian
Жыл бұрын
Hi my Sear is also up can’t put the slide back on I pulled that pin like you said but there is no movement whatsoever in the sear ?
@TunedRAMS
Жыл бұрын
Do you have a safety?
@TheHumbleBelgian
Жыл бұрын
@@TunedRAMS no ! But I fixed it already I read the comments and it helped thanks anyway
Пікірлер: 33