Their equipment looks very good. Can you please do some washing in real situations?
@ExpertPowerWash
8 ай бұрын
Lots of older videos. This stuff is used daily in our own wash business.
@fsu4ever239
Жыл бұрын
I just added that same one but I'm not get near any pressure and it won't shut off after letting it run for several min with gun cut off.
@ExpertPowerWash
Жыл бұрын
Definitely make sure you have the right pump. If so, check the pressure switch to see if it needs adjusting. Shouldn’t be an issue if it’s new from the factory. I’d get a hold of Remco if the problem can not be resolved.
@backspace12399
Жыл бұрын
Do you still run a 30amp breaker to it? Im still learning wiring and what not. Oh I see the 24amps now lol. So yes
@softwashsolutionsny
Жыл бұрын
Cool! Ever since I added hose reels to my remco 5.3 set up, I seem to have lost about 10-15 ft of reach! Do you think switching to the 7 GPM would make up that difference? Or should I be looking for something else? I’m running 5/8 kuritech softwash hose and 1” non-crush lines to and from pump
@ExpertPowerWash
Жыл бұрын
Try cam locking to the pump and use the reels for storage only
@TheFreshRinse
Жыл бұрын
Love it. Have you noticed much difference between the 5.3 and 7?
@ExpertPowerWash
Жыл бұрын
I haven’t officially tested the flow but it seems a lot better than the 5.5 60 psi. Seems to run smoother too.
@HouseWashingRick
Жыл бұрын
Where can I buy that on off switch
@TheFreshRinse
Жыл бұрын
@@HouseWashingRick I think I got that one at Lowes.
@ExpertPowerWash
Жыл бұрын
We sell them. You can’t find these ones in stores.
@ExpertPowerWash
Жыл бұрын
These are the heavy duty ones. Search Gama switch. We sell them as well expensive but worth the build quality.
@user-wy4xw2zt9k
Ай бұрын
Where do I get a switch like that?
@ExpertPowerWash
Ай бұрын
We sell them pressurewashingskids.com/products/soft-wash-12-volt-switch?_pos=2&_psq=Switch&_ss=e&_v=1.0
@MrDRiGo9
Жыл бұрын
Is there a big difference on the 7gpm 60psi and the 100psi ?
@ExpertPowerWash
Жыл бұрын
Just a little but enough to make it worthwhile. Shoots a little higher and has more pressure.
@Primitivepressurewashingllc
6 ай бұрын
What size hose do you use and what is the distance you can get ?
@ExpertPowerWash
6 ай бұрын
Lot goes into the size of hose. There are several areas of hose. The type of plumbing plays a big part. Too much to type here on SW plumbing. No short answer.
@Primitivepressurewashingllc
5 ай бұрын
Hose that connects to gun
@Randlehandle2012
5 ай бұрын
What is the ideal proportioner valve size? Rest of plumbing for this pump?
@ExpertPowerWash
5 ай бұрын
3/4 on soap and Water runs the best
@SodBustersMetalDetecting
4 ай бұрын
How did you mount it to the box?
@ExpertPowerWash
2 ай бұрын
Stainless screws and bolts or we can build you something like this. Here’s our website. pressurewashingskids.com
@brycepridemore9864
5 ай бұрын
Mount it upside down so when it leaks you don’t lose the motor too
@ExpertPowerWash
5 ай бұрын
We may do this in the future. We haven’t had any problems of the last 50 or so we built like this. Thank you for the comment.
@markertoutdoors3883
Жыл бұрын
I had one mounted like that and fried within 2 months, isn’t it upside down? I just got the same pump, or can it be mounted any way?
@ExpertPowerWash
Жыл бұрын
This is the way we run them with no issues. I’m guessing it didn’t have anything to do with the way you mount it. Rinse it out religiously. Also some go bad sooner than others. We run harsh chemicals them them.
@alexisbarrera7789
3 ай бұрын
can you reach a 3 story home
@ExpertPowerWash
2 ай бұрын
Yes but not consistently. You need to downstream.
@BRExteriorPro
11 ай бұрын
So I got the same exact pump today. Do you think that we made a mistake not getting the one rated for bleach?
@ExpertPowerWash
11 ай бұрын
My said chemical resistant. If you are referring to the Everflo bleach pumps, they are garbage.
@Parkerhiggs
Жыл бұрын
are you using 1/2in hose for this pump?
@ExpertPowerWash
Жыл бұрын
Yea
@Kgoutdoor
6 ай бұрын
Where did you get that switch?
@ExpertPowerWash
6 ай бұрын
We source them from the manufacturer. They are the best of the best and super heavy duty. pressurewashingskids.com/products/soft-wash-12-volt-switch?_pos=2&_psq=Switch&_ss=e&_v=1.0
@smashingintexas765
Жыл бұрын
What's your thought on the 10gpm everflow bleach pump?
@ExpertPowerWash
Жыл бұрын
Junk. All the Everflos are junk. I used to sell their products until they wouldn’t make good on the bleach pump warranties. I have left several messages with them and never a returned call to someone that sells their products. I ended up giving away tons of pumps to guys that had their pumps fail within days. I probably lost 1000s of dollars to them. Worst company I’ve ever dealt with.
@smashingintexas765
Жыл бұрын
@Expert Power Wash what do you recommend then BROTHER just starting out and want the BEST???
@smashingintexas765
Жыл бұрын
@@ExpertPowerWash one more question HONDA IGX 10GPM OR 8GPM ?
@NattyGymMotivation
3 ай бұрын
Are you reaching 3 stories easy with it?
@ExpertPowerWash
3 ай бұрын
We have yes. Wind can affect that though
@rabbitskinner
11 ай бұрын
Only problem they last 6 weeks
@ExpertPowerWash
11 ай бұрын
Depends on how you have it set up. Oversized plumbing, excess 90s, full rinse system? We had one go out shortly after we installed it. Remco took care of it and sent extra pressure switches. You may have just got a dud. It’s happened to me as well. Thank you for commenting and sharing your experience.
@dirtblasterspowerwashing
Жыл бұрын
How long do they hold up ?
@MrDarrinSmith
Жыл бұрын
They're great while they work but fail way to often for me
@ExpertPowerWash
Жыл бұрын
Best pump I’d used. They last as long as some and longer than most. We have 3 months on ours. I’m confident it will keep going through the summer.
@dirtblasterspowerwashing
Жыл бұрын
@@ExpertPowerWash I hope mine last at least 6 months lol
@stevenjustice7074
Жыл бұрын
Glad you’re having good luck with them. I tried them and have had nothing but trouble. First lasted half a roof wash and the pressure switch went bad and it blew the head out. The second lasted two washes and partway through the third it died and never started back. I’m going back to air
@ExpertPowerWash
Жыл бұрын
That sucks. Where did you buy them. I think there are two versions. US made? Threaded or quick connect fittings?
Пікірлер: 54