Its not often you can so clearly see where your money is going. This is a value.
@speedgems3978
2 ай бұрын
We want to be transparent to our customers and help them as much as we can! Thanks for the comment!
@richardm7614
2 жыл бұрын
One time that suggested videos pays off! Looking at doing this swap at some point in the future for my full size Bronco. Going to put the ZF5, though currently with the M5OD, behind it when I eventually get it all done, and I do like the kit you have, so definitely going with it.
@speedgems3978
2 жыл бұрын
@ Richard M - Thanks for the feedback! You will find this and other Speed Gems Kits for your project/s at: www.transmissionadapters.com - Go to 'Shop Kits' and select from there! Thank you for choosing Speed Gems Transmission Adapters!
@jasoncampbell4723
Жыл бұрын
SWEET!!! Every time I find an M5R2 it gets bought whether I need one or not, be nice to put one behind a OM606.
@beaniebassist
2 жыл бұрын
I want to put a ZF6 behind an om617. This is perfect. I actually wanted to try a new transmission ZF has but it seems that they don't sell automotive transmission in North America. Just advertise them. Can't even get corporate sales on the phone. So this saves me.
@75LS1Vega
2 жыл бұрын
So from what I can see, if the starter requires replacement, the transmission will have to be removed from the adapter, correct?
@hayest9872
Жыл бұрын
If you get the 606 you can use the 603 injection pump to keep it entirely mechanical vs the EDC pump on the 606. Check out dieselmeken and dieselpumpuk for good pump info.
@gtowncasey111
9 ай бұрын
Looks like a great kit. Looks like you would have to pull the trans to change the starter, is that the case ?
@speedgems3978
6 ай бұрын
Unfortunately yes, the way that the starter is and how it has to be fasten would require to pull the trans.
@bernardwarr4187
2 жыл бұрын
Very nice engineering. Definitely interested in a adapter and flywheel for a 1993 Mercedes M119 V8! Can you help?
@BlackFlagHomestead
3 жыл бұрын
What an awesome video!
@uliwehner
3 жыл бұрын
really surprising y'all do not have more subscribers. This seems to be the ticket for quite a few popular swaps now. can these manuals handle the power and torque a tuned OM606 makes? edit: seems like the NV4500 can
@speedgems3978
3 жыл бұрын
The NV4500 is stout right out of the gate and should have no problems handling most OM606 builds. There are several other transmissions that will take the abuse for a while. As with everything it is all about how you treat it and if you're looking to have something that will hold up to your build I would have one built.
@speedgems3978
3 жыл бұрын
@@Sk8a1016 Do you have an order #? How long ago was this? Speed Gems has new management. Mr Bendtsen is no long with us and has nothing to do with the business. If this were something recent we would love to replace the parts that were not correct and/or refund your money.
@speedgems3978
2 жыл бұрын
@ Bongz on the Beat - We will be taking the OM60X engines back to R&D over the next several months. We wilil eventually be working on that version, however the Jeep is our priority once we are back working on it. Thank you for the interest! www.transmissionadapters.com
@TheTexas131
Жыл бұрын
Sooo, to change the starter one must remove the transmission? Maybe I missed something?
@georgewashington1106
9 ай бұрын
I was just looking at that, thinking "hey, wait a minute...."
@franknwenier
2 жыл бұрын
Will these kits work on a om 602
@speedgems3978
2 жыл бұрын
@ Raymond Balcom - Hello - Thanks for your interest! These are still in R&D, so TBD...please stay tuned on our website: www.transmissionadatpers.com Thanks!
@JDK73772
Жыл бұрын
As I understand all of the Mercedes OM*xx have the same bellhousing so would this kit work with a OM617?
@juantraverso7772
Жыл бұрын
Hola el volante es de algún vehículo o es hecho ?
@TheArcticWonder
3 жыл бұрын
Do these transmission come in 4x4? I am trying to figure out what transmission to pair with an om606 put into an '87 ford f350 that currently has a c6 auto.. any wisdom or recommendations is VERY appreciated. Thanks, Garrett
@speedgems3978
3 жыл бұрын
Garrett, Our adapter will work with your current C6 if you'd want to keep that same set-up in your truck. Otherwise, yes you can find 4x4 6R80 transmission. Feel free to give us a call if you have more questions.
@tyson99911
Жыл бұрын
Hi could I use a Tremec tko500 with a small block ford Bel-housing with this kit Om606 engine
@randypeacock8062
Жыл бұрын
I seen you had a ford one. what transmission will it adapt to?
@krajus83
Жыл бұрын
Do you guys make anything specific for FSJ swaps? Doing a 606 in my j20.
@speedgems3978
2 жыл бұрын
@ narcissist injury giver - This Kit is not specific to the OM617, however, we offer multiple Kits for the Mercedes Diesel Engines - Please see the link below: transmissionadapters.com/collections/mercedes Thank you for choosing Speed Gems Transmission Adapters!
@speedgems3978
2 жыл бұрын
@Bernard Warr - Thank you for the feedback! Unfortunately, nothing for the V8 at this time. Mercedes Kits that we currently offer listed here: transmissionadapters.com/collections/mercedes Thank you for choosing Speed Gems Transmission Adapters!
@user-tw1nj6eh6j
2 жыл бұрын
مرحبا صديق كم سعر مجموعة التحويل لسيارة جيب شوروكي موديل 2000 على محرك om 603 مرسيدس
@307mtb
Жыл бұрын
Would the M5OD hold up behind a 606?
@domingomartinezbonilla8593
2 жыл бұрын
good job where did you get the adapter plate
@winterlounge
2 жыл бұрын
I'd like to adapt a Eaton Fuller transmission to OM617
@bongzonthebeat
2 жыл бұрын
Would it be possible to make an OM606 adapter for 1994-2000 Dakota/Ram with NV3500 5 speed manual transmission? I have a 1st gen 96 dakota 5.2 V8 with NV3500 manual transmission and it’s 4x4 but i want to OM606 swap it just need to see if i can use that factory non disconnectable bellhousing since NV3500 i have is for the Ram/Dakota 5.2 only
@tomconner5067
2 жыл бұрын
Small block Chevy, big block Chevy, six cylinder Chevy, same transmission bolt pattern. I am not sure about the LS series modular engine line.
@offgridmangogrower
2 жыл бұрын
What are your kits selling for a om606 to a nv-4500 dodge or getrag g36…? Thanks
@aliabdallah102
2 жыл бұрын
I don't have money, a project car, or the willingness to do any of that. But that's so gd cooll.
@komoru
3 жыл бұрын
Do you guys provide exact torque specs and are flywheel bolts still torque to yield?
@speedgems3978
3 жыл бұрын
Our kits use factory torque specs. The bolts we use are not torque to yield. They should be torqued to crank using factory torque spec minus the yield.
@earlsmachinerepairandsidin6211
3 жыл бұрын
So you gotta remove the transmission to change the starter?
@speedgems3978
3 жыл бұрын
Unfortunately, yes. Mercedes bolts come from the backside of the OEM transmission into the starter. In order to use a different transmission we had to make the adapter plate like the OEM Mercedes. Unlike most domestics where the engine or transmission is threaded instead of the starter for the Mercedes is threaded. It is the only way to hold the starter in the OEM location without additional modification(s). However, Since you're looking at the manual kit at least you can still bump-start it in a pinch. =)
@narcissistinjurygiver2932
2 жыл бұрын
will it work for the om617?
@user-tw1nj6eh6j
2 жыл бұрын
كم سعر مجوعة تحويل لجيب شوروكي 2000 لمحرك om 603
@speedgems3978
2 жыл бұрын
@beaniebassist - Yes, you can surely do this application! We sell the cluch kit as an add-on to mate! www.transmissionadapters.com
@Mac_Made
2 жыл бұрын
Correct me if I’m wrong but arent the Mercedes M103 and M104 the same bolt pattern as the OM606?
@speedgems3978
2 жыл бұрын
@ Mac Made Rusty - Believe you are correct, however, we have not confirmed this.
@speedgems3978
2 жыл бұрын
@Jack Buntin - Yes it sure will! Please visit our website - Go to 'Shop Kits' and check out the Mercedes Kits that we offer. www.transmissionadapters.com
@PureCountryof91
3 жыл бұрын
Hmm.. wonder what kinda mileage I'd get in my 5.0 swapped ranger with a 606..
@speedgems3978
3 жыл бұрын
Depending on the gearing and trans I would say it wouldn't be outrageous to say 30-35. It would also depend on how much coal you want to roll!!!!
@PureCountryof91
3 жыл бұрын
@@speedgems3978 damn! And she's a 4wd.. I will look into it! This might be better than a Barra.. at least for my needs
@speedgems3978
3 жыл бұрын
@@PureCountryof91 We love the Barra. However, as they weren't really much of a standard option here in the US they are more expensive and might be a bit harder to source parts for. The OM60X were sold here in the states. This makes them cheaper to acquire and replacement parts can be found without international shipping.
@montycrain5783
3 жыл бұрын
40 mpg. It gets over 30 in a big Mercedes.
@PureCountryof91
3 жыл бұрын
@@montycrain5783 honestly, I think that's gonna be gearing, the diesel might not like the bigger gears, and might not balance out with the tire height, the 5.0 was reasonably happy at 3000rpm (I didn't do that much got loud) unfortunately, that vehicle had a fire and is gone. However, I do think the 40mpg is doable with the right gears and the 3k pound weight. Whereas I think some of those cars were 4200+?
@speedgems3978
2 жыл бұрын
@Domingo Martinez Bonilla - Hello, We sell this Adapter/Kit here at Speed Gems. Please visit our website - Go to 'Shop Kits' and check out the Mercedes Kits that we offer. www.transmissionadapters.com Thank you for choosing Speed Gems Transmission Adapters!
@Apollo.Outdoors
3 жыл бұрын
I just looked on your website and I can’t find the kit that pairs the om 603 to the Chevy manual 5 speed
@speedgems3978
3 жыл бұрын
here you go. transmissionadapters.com/products/copy-of-me1000401-mercedes-5-and-6-cylinder-diesel-engines-87-and-newer-to-chev-manual?_pos=1&_sid=fa93372da&_ss=r
@brandonrobertson6327
6 ай бұрын
@@speedgems3978You claim you have a ford transmission adapter for the OM606. Your web site only shows ford automatic and goes to error when searched. Wondering, how much business are you not getting? You need to update your web site.
@speedgems3978
6 ай бұрын
@@brandonrobertson6327 Hi Brandon - Easy to miss in our large collection of transmission adapters, here it is. transmissionadapters.com/collections/mercedes/products/copy-of-me1000401-mercedes-5-and-6-cylinder-diesel-engines-87-and-newer-to-chev-manual
@brandonrobertson6327
6 ай бұрын
@@speedgems3978 Thanks for the response. I just wanted to let you know. Web sites are not cheap to maintain and losing revenue ain't fun either.
@aquilesesquivelmadrazo7732
3 жыл бұрын
Were i can get that kit for a 1994 ford ranger
@speedgems3978
3 жыл бұрын
Can you send us an email. Sales@transmissionadapters.com
@ Nolan Sacket - No, sorry we do not. Only Transmission Adapters. www.transmissionadapters.com
@joshuas10
3 жыл бұрын
Anything to bolt an om606 to 4l80?
@speedgems3978
3 жыл бұрын
We do make a kit for that. Please check the website. www.transmissionadapters.com
@shasha-km9dv
3 жыл бұрын
Do u make adapter for fj40land cruiser
@speedgems3978
3 жыл бұрын
We currently do not offer a kit for that.
@brandonrobertson6327
6 ай бұрын
If you swap a chevy transmission, it would work. Just have to fab engine mounts for the OM606.
@jeromedeas5369
Жыл бұрын
😅
@wilfredomartinez5371
4 ай бұрын
Where are u guys located what state any good phone number
@speedgems3978
3 ай бұрын
We're in Waunakee, WI. Check us out online at www.transmissionadapters.com or call us at 763-767-4480
@maddoxinc1642
3 жыл бұрын
RIP headphone users.
@speedgems3978
3 жыл бұрын
Sorry about that.
@Ty-bw9sw
2 жыл бұрын
Could it pair to a 4l60E with a adapter? I want to keep 4x4
@speedgems3978
2 жыл бұрын
@ Ty - Here is a link to our Mercedes Kits, including to Chevy Automatic: transmissionadapters.com/collections/mercedes Thank you for choosing Speed Gems Transmission Adapters!
Пікірлер: 78