Can I add switch on that white wire? If I want to give my scooter for test drive. Will it damage scooter if connect and disconnect that wire, while scooter is on (with small switch)?
@noikristinsson702
2 ай бұрын
Did you ever get an answer or find an anwer to your question?
@happyhusband312
5 ай бұрын
it's more difficult, there's also a ring around which is hard to spot:)
@ignazgumpanferdl5339
10 ай бұрын
I do that on my blade mini pro and they say it goes 55kmh but it just goes 44kmh. Whatever, its enough for me.😅
@MaxBlinker
10 ай бұрын
For the Blade Mini Pro (dual motor), the top speed declared by the manufacturer is 55 km/h. However, it always depends on other parameters such as terrain, wind conditions, rider weight and more. We wish you many happy kilometres.
@jemme8468
Жыл бұрын
This isn't necessary for the US version
@tromboneslo
3 жыл бұрын
Those black pluggs need to be plugged back right? Only white needs to be unplugged?
@Prittyboy203Gaming
3 жыл бұрын
Yes only the white wires are supposed to take off the limiter those black ones are the charging plugs
@aerofpv2109
3 жыл бұрын
Yes they do. He just pulled them off to gain access to the white plug.
@thefpvlife7785
3 жыл бұрын
Time for overheating
@BrooklynGamerNY
2 жыл бұрын
that's what it look to me but with a ebike I see people do is all the time
@Namdor2012
2 жыл бұрын
Nah it's restricted for some countries by law, Aus to name one of many..Unplug and you get the full gusto...Woot
@OKBAOK
7 ай бұрын
Thanks for the video, quick question, I put new controller on my brother’s vsetts10+ everything works, has the white wire speed limiter connected only on the controller. After installation the scooter drives only 15mph. They said disconnect it or cut the white wire to remove speed limiter. I cut it separate it, still 15 mph. Do you think I have to adjust something on the menu? thanks for the good video 👍🙂
@MaxBlinker
6 ай бұрын
If the white wire is disconnected on the controller, the speed should be unblocked. However, it's possible that it's still somehow limited within the display settings. For example, you can set the motor power there.
@andrewwhite1065
4 ай бұрын
Disconnecting or cutting the white wire works and no overheating or other issues so far. Went from a 'limited' speed of 25km/h to 75 uphill on 2 motors without engaging the Sport mode. But i generally stick to just the rear motor for my commute to work. Which now gives me plenty of speed without the really aggressive acceleration. Short and very informative video.... many thanks
@medo3525
Жыл бұрын
i need to replacer just the top cover but i have no idea where to order
@MaxBlinker
Жыл бұрын
What about this? www.maxblinker.com/en/spare-parts/vsett/vsett-10-rubber-pad-for-cover-plate and www.maxblinker.com/en/spare-parts/vsett/vsett-10-rubber-pad-for-cover-plate
@medo3525
Жыл бұрын
@@MaxBlinker not just the rubber part but the whole top plate because the last person that serviced it tightened the screws too much and it cracked
@MaxBlinker
Жыл бұрын
What about this one? :) www.maxblinker.com/en/spare-parts/vsett/vsett-10-cover-plate-plastic
@medo3525
Жыл бұрын
@@MaxBlinker yess this piece exactly but does it come with screws aswel
@MaxBlinker
Жыл бұрын
No, only this part is in the package. You should have the screws on your scooter.
@BrooklynGamerNY
2 жыл бұрын
how fast can u go now and is it safe to do
@milordas
2 жыл бұрын
with it 22km/h (true by gps), witout ~70
@VegitoBlackityBlack
2 жыл бұрын
Around 40mph.
@luckyluciano4075
2 жыл бұрын
@@VegitoBlackityBlack B.S ! My vsett 10+ is new from the store and it can go 50 mph without that change!!!
@VegitoBlackityBlack
2 жыл бұрын
@@luckyluciano4075 ur probably skinny. But for 200+ pounds it's about 40mph.
@nassiratti8542
2 жыл бұрын
@@VegitoBlackityBlack Nah my friend, I'm a bodybuilder riding this rocketship (VSett 10+ 28 Ah), and I've gone 52 mph solid on straight, flat road pavement.
@Indo432
3 жыл бұрын
In confused 🤔
@cqclapsshort7399
3 жыл бұрын
It goes faster if you do this
@aerofpv2109
3 жыл бұрын
It's supposed to take off the restrictions that some countriess put to lower the amount the scooter can go say 20mph as it really can go 40mph. This is a EU thing.
@Speeedandpoweeer
2 жыл бұрын
I mean the scooter is build to go at that speeds but is it safe for the scooter?
@luqhakim2001
2 жыл бұрын
No Is not safe I think this vsett 10+ was designed already to go fast I mean up to you if you want to access speed without limited
@jemme8468
Жыл бұрын
The steering column is very loose on scooters. You need a steering damper above 20 miles an hour to prevent death wobble
@vl9665
Жыл бұрын
@@jemme8468 its designed to hit 40mph
@ampullaria4514
Жыл бұрын
@@jemme8468I get death wobble on mine starting at 40, but if you have strong ass arms you can ignore it.
@Slamjam88
3 жыл бұрын
So what does this achieve? Does it go faster for longer? Sorry I'm confused
@Prittyboy203Gaming
3 жыл бұрын
It's supposed to take off the restrictions that some countrys put to lower the amount the scooter can go say 20mph an it really can go 40mph all the time as much as you want but by law it's got that wire in place
@luckyluciano4075
2 жыл бұрын
@@Prittyboy203Gaming 1000000 likes!
@relax2658
2 жыл бұрын
@@Prittyboy203Gaming even if I buy it on the us , 2022 model ,Do I still need to do that
@Prittyboy203Gaming
2 жыл бұрын
@@relax2658 hey if u buy the us version u shouldn't have to even touch it after I bought mine vsett I was able to hit top speeds u just need to go into the manual and look at the P settings and it gets super responsive and u can put on cruise control but I'm from the us and got mine from revrides an didn't have to cut anything hope that helps
@bhoff82
Жыл бұрын
@@Prittyboy203Gaming Is it possible to limit speed on the scooter via the display? I can only find aftermarket mods to limit the RPMs, in case I wan't to let someone else ride the scooter.
@Robert127
3 жыл бұрын
You don't explain what your doing you just confused people what is happening this video is just a waste of time with your music explain what the heck is going on here sir ..
Пікірлер: 46