When I bought the 6250, I wasn’t sure how I would like forward programming. It’s great, very handy to be able to adjust things at the field with plain English menus without having to hook up a computer.
@Reinierbaasrc
Жыл бұрын
Thnx for this video, it was very helpful. Bought a 480 recently. I'm coming from smaller helis like the 360 and 330. With your video I hope to fly soon with the 480!
@ahwayzcool4630
4 жыл бұрын
I bought the fc6250hx to try on my Kraken 700. My aileron and elevator tic tocs are wobbly. Been messing with PID settings trying to smooth it out. PIDs are a PITA to get right. 😑 so far I'm liking this unit, just gotta keep tinkering because I'm not an expert with PID tuning.
@michaeldunbar5877
4 жыл бұрын
Thank you so much for sharing this instructional video. I watched them both, including the other on the IX12. I was able to setup my Blade 480 smart super combo and flew it yesterday for the first time with no bad surprises with my DX9. This was my first kit assembly (I am and old airplane dude) of a heli and don't think it would have been a success without your info. You do a great service with your videos and help take some of the intimidation out of the heli mechanics. Now, next project Align 700 nitro. Thinking of using Ikon2 with Spektrum satellites. The few heli guys I know swear that I need to go Futaba. I have built and flew several giant scale gaser planes on Spektrum with no real problems and really do not want to change if not necessary. Your input would be appreciated ,should you find the time. Thanks again.
@jjp093
3 жыл бұрын
Hello, this video will help me a lot I think my project is to mount a TREX 600 esp in a fuselage and use the FC 6250HX with a DX9 thanks again
@rcas350pilot8
3 жыл бұрын
Good vid, cleared up some things.
@mattguidry980
4 жыл бұрын
i have a dx8 and was able to get all flight modes working, and able to turn safe on/off independently
@YODA1619
4 жыл бұрын
I was going to ask because i thought CoeShow had MattBbot's 330S set up to have safe on 2 of 3 flight modes and that was on a DX8. I need to get a new transmitter for my 330S and was going to get a DX8 and wanted to make sure it was enough channels.
@RyonideUnruly
4 жыл бұрын
Once you set the tail up on the ix12 did you have any issue with the slider going to one side of the tail shaft constantly without no stick inputs as I’m having that issue. Thanks
@CoeShow619
4 жыл бұрын
Ryonide go to System set up and hit calibrate sensor. It will stop doing that. Make sure nothing is beeping or humming on the heli. The gyro is so sensitive you may have to unplug motor wires to keep speed control from beeping so the gyro doesn’t Feel it while calibrating.
@Nytro97
4 жыл бұрын
I also noticed you have the Microheli skids on your heli.... how have they worked out for you. I have a hard time getting use to the stock skids on the 480 and 270.
@richardb8317
3 жыл бұрын
What setting is used to control the pyro speed (Rotation) ...or can you use dual rate in the trans. All can you give a brief explanation of what degrees per second does? ... Does it increase the throw of the servo? Or does it speed up the response time of the servo with increasing throw? Cant find definitions ANYWHERE for the terminology... The 6250 manual sucks
@Nytro97
4 жыл бұрын
Thanks for sharing, I found it strange there are not basic radio settings in the Fusion 480 manual for throttle and pitch curves etc. Somebody drop the ball ?
@curtis9993
4 жыл бұрын
Awesome video!!! What do you think of the fbl flight modes after using it some?
@CoeShow619
4 жыл бұрын
I don't use Safe, and I fly too low for Panic recovery, so I just use it as a standard flybarless system, and it flies well
@johngowing2252
Жыл бұрын
How's it going Justin. I have a problem with everything powered on ready to fly the tail servo creeps to full right rudder. I tried 2 different radios and 2 fc6250's and same issue. Any ideas?
@CoeShow619
Жыл бұрын
Yep. Recalibrate the sensor in forward programming/ system set up. Use a friends radio if you have to. You’ll have to bind to it. Sucks but guess that’s how you have to do it. That’s the only way I can think of doing it yourself without waiting for Horizon service.
@johngowing2252
Жыл бұрын
@@CoeShow619 Thanks man I'll give it a whirl.
@TheScottsatisfaction
3 жыл бұрын
you left out the panic information. got the SAFE info but how about the panic switch I ??
@waynemorgan756
3 жыл бұрын
Hi can you confirm swash setup 90 or 120 many thanks
@adam861031
3 жыл бұрын
Looking for same info…
@waynemorgan756
3 жыл бұрын
only cause in your vid setting up the trasmitter you say normal for the servo setup but when setting up through port forwarding you say 120 for the servo is that a mistake
@junyang5534
4 жыл бұрын
I want to ask, this fc6250hx helicopter flybars control system
@lkn4home
4 жыл бұрын
What did you end up with for your pid. Gains if I may ask
@kara2814
3 жыл бұрын
I am considering buying a FC6250HX and have just updated my DX9 to firmware latest version 2.08. However, in the Function List there is no Forward Programming showing. All the other options as shown on your DX9 screen are there, just no Forward Programming. Is this something that appears after you bind the FC6250HX? I don't want to buy this and find my radio is not compatable so any advice would be appreciated.
@CoeShow619
3 жыл бұрын
Yes, forward programming shows up in the menu with the new 6250hx powered on after being bound.
@kara2814
3 жыл бұрын
@@CoeShow619 Thank you CoeShow619 that's good news, I'll order one up now. Great video as well.
@waynemorgan756
3 жыл бұрын
sorry also where do you set up your servo voltages many thanks
@roberttoebak7277
3 жыл бұрын
Well my dx6 black does nothave this menu
@JamesSmith-un4rz
3 жыл бұрын
you neglected to cover the hover setting? on maiden with my gob 570 it tipped over. ive rebuilt but it still tries to tip over? should i adjust the factory hover setting up or down to get it up in the air without a tip over?
@CoeShow619
3 жыл бұрын
Set it up as the manual states. Neglect is kinda rough. Use the heli knowledge. Or try a different flybarless system.
@CoeShow619
3 жыл бұрын
Check your gyro sensor is countering the movement of the heli. If you lean the heli left, the swash counters right. So if you set it up wrong, the heli tips left, and keeps going left because the sensor direction is backwards. But I can’t see or feel the helicopter so this is just a guess.
@petervice
3 жыл бұрын
Very informative but he is rushing so he lost me 5 min ago and the transmitter screen is not visual because of reflection on screen. I have a BeastX and I was told to buy this system as its so easy to set up so far my son in England said this system is so easy.mmmmmm I think BeastX is user friendly. I'll have to watch it over.
@CoeShow619
3 жыл бұрын
Press pause. The video pauses.
@junyang5534
4 жыл бұрын
Does fc6250 support oil powered helicopters?
@HornDoggTV
Жыл бұрын
How do you bind the satellite?
@CoeShow619
Жыл бұрын
First bind your 4651t with the button on it. Then unplug it, put a bind plug in the program port, and bind the remote receiver as usual. Remove bind plug before powering off. Plug the 4651t back in.
@iggi70
3 жыл бұрын
I bought the SPM9747 DSMX SRXL2 Remote Receiver. It has a 4pin/4wire, the rx1/rx2 on the 6250HX is a 3pin/3wire slot. Can I use the X-BUS slot on the 6250HX for the SPM9747 remote receiver?
@CoeShow619
3 жыл бұрын
I am not sure what the Xbus port is for. I use a 4651T receiver with a servo lead on it plugged into the program / SRXL2 port. You can use a remote DSMx receiver along with that, but you bind them separately. First the remote receiver with a bind plug in the program port, then plug in the 4651t and press the bind button on it to bind it. Maybe you can go from 4 pin to 3 pin servo lead, and plug it in at Program/srxl2 and bind the 9747 as I do with the 4651t. I sometimes cannot get my questions answered. The only way to do it is to find out on your own sometimes. That’s what I do. I only copied what they do with the Fusion 360. That’s why I use a 4651t.
@iggi70
3 жыл бұрын
@@CoeShow619 thanks for the reply. The 9747 has a bind button like the 4651t. I have the 4651t in the BND/PRG/RX2 slot and the 9747 in the X-BUS slot. I Pushed the bind button on both units, then bound to my NX10. Solid Orange on the 4651 and 9747 and Green on the 6250HX. It took the bind, just wondering if its safe or ok to do it that way.?
@CoeShow619
3 жыл бұрын
@@iggi70 in my opinion, you don’t need the 9747 on there. We fly a helicopter within range. So I don’t know, but I do know you can use a DSMx remote receiver with it. In reality, you have two telemetry signals being sent. Doesn’t seem right to me, but I don’t know.
@iggi70
3 жыл бұрын
@@CoeShow619 thanks for your replies. I live an hour north of SD, in a little town called Menifee. I might someday come down on the weekend and fly with you. Maybe you can do a tuning class on the spot for me. I’ve watched your videos over and over trying to learn. I am trying to get back into heli’s after a long break, I think it was 2006. 2006 is when I deployed and did my time in the sand box, Middle East. Good times great memories. Thanks for being an Ambassador to the sport.
@cripesamighty1
2 жыл бұрын
Does anyone know where I could find info on setting up a Blade 400 on a DX9?
@bradharvy13
Жыл бұрын
I would have called HH...
@rayduffield749
3 жыл бұрын
My Gyro setting doesn't show a helicopter with the flight controller behind it, it only shows an airplane and nothing behind it?
@CoeShow619
3 жыл бұрын
Huh??
@rayduffield749
3 жыл бұрын
On your transmitter when you were in the gyro configuration for which direction you have your 6250 in and had a picture of a helicopter and then a picture of the 6250 so your transmitter was showing which way it was facing but my DX8 G2 doesn't have that it just shows an airplane with 8 different settings?
@rayduffield749
3 жыл бұрын
I may need to update my DX8 again
@jamiegagnon5095
4 жыл бұрын
Just ordered ix 12 . Did you ever run into any hiccups
@richardb8317
3 жыл бұрын
Cant find a swash leveler for this heli anywhere?? Anyone know?
@CoeShow619
3 жыл бұрын
Yeah, use your eyeballs dude. You don’t need a leveler if you can see.
@richardb8317
3 жыл бұрын
@@CoeShow619 Well Im old school i guess. Building heli's since the first model heli was produced...Early 70s... The swash tool is the correct way , but I know its not as critical as the old flybar days...lol;
@richardsmith5689
Жыл бұрын
how did you bind it
@CoeShow619
Жыл бұрын
First, I read the manual. Then I held the bind button down on the 4651t receiver. Bind it like we bind Spektrum
@CoeShow619
Жыл бұрын
Just update your DX9 on SpektrumRC website with a Sd card to get the forward programming function. If your radio is old and has never been updated, it will not work. It must be updated.
@richardsmith5689
Жыл бұрын
@@CoeShow619 i have the black edition dx 9 with the latest firmware 2.9 i get the forward programing when i go to set up and swash plate set up hen to output set up i do not get frame rate, type , direction and sub trim all i get in the sub trim.
@CoeShow619
Жыл бұрын
@@richardsmith5689 If the 6250jx is from a bind and fly, you can only adjust those values. If you update the 6250 to the open source version explained in the download drop down list. You can update the 6250 with the SPM3065 updater cable and watch Tom’s 6250 set up videos on Spektrum RC KZitem channel.
Пікірлер: 58