Every time a choppy v8 is born a prius driver sheds a tear. 😂
@garrickalbritton3995
Жыл бұрын
I love your truck bro ..
@jameskern1214
4 ай бұрын
Sounds excellent
@dieselmech7227
Ай бұрын
how soon until you post a video of it on the road? Pls show us take of wot from a dead stop!
@henryt3442
Жыл бұрын
Sound healthy as... mean...
@fbbc6495
Жыл бұрын
Dude r you serious that's fuckn awesome
@toddkelly611
7 ай бұрын
Thank you for not wearing flipflops.
@lilrobert198527
Жыл бұрын
Sounds damn good is the exhaust ran with all stainless steel
@vj4789
Жыл бұрын
Yes
@funvic
Жыл бұрын
Sweeeet ❤
@garrickalbritton3995
Жыл бұрын
I’m building one just like it
@gordocarbo
5 ай бұрын
@@vj4789 True stainless exh sytems to the bumpers have a distinct sound .Not cheap but sound killer and can be show polished too .Nice looking box you got there! Too tall to fit in those things .
@p.b.sHUNTING
5 ай бұрын
I can’t begin to tell you how many “Mutha Thumpers” there are for SBC’s. My son loves the rhythm of this cam, we want to find a cam for my vortec 5.7 that we’re throwing a Brawler on…. Hope we can pick the right cam
@gordocarbo
5 ай бұрын
Try Isky or Crower they wil get it right the first time. Wouldnt recommend buying based on any video Any performance cam will sound good. Lots of it is in tuning.
@garrickalbritton3995
Жыл бұрын
Show more of the truck
@tylerbraud6635
10 ай бұрын
What drop do you have? Coud you post a picture of the side
@JS-kd7jf
3 ай бұрын
It might have a nice mean LICK to it,, but how's the torque and the power and the MILAGE? KINDA CURIOUS,, THOUGHT ABOUT PUTTING ONE IN A 283, BUT IF IT'S GOING TO NOT HAVE TORQUE ETC, I DON'T KNOW,, IT SOUNDS AWESOME THOUGH....
@vj4789
2 ай бұрын
It’s honestly not bad. Truck makes pretty decent power. As far as fuel mileage I’ve never really checked it but a tank of gas doesn’t last very long lol
@garrickalbritton3995
Жыл бұрын
What cam are you running and compression ratio
@garrickalbritton3995
7 ай бұрын
@@FinnellRacing I got it thank you
@p.b.sHUNTING
5 ай бұрын
@@FinnellRacingtry looking up that cam and see how many versions they offer for it. Then you’ll understand why that question was asked….. because no cam specs were provided in this video
@p.b.sHUNTING
5 ай бұрын
@@FinnellRacing this is the problem with people saying “I run a mutha thumper”…. They don’t post camnpart numbers or specs
@p.b.sHUNTING
5 ай бұрын
@@FinnellRacing mutha thumper is a line, not a part number. Cam specs change ALOT with flat tappet, hydraulic roller, hydraulic flat tappet, solid…..
@p.b.sHUNTING
5 ай бұрын
@@FinnellRacing yea they absolutely do
@jameswelch8358
9 ай бұрын
Are you running an H or X pipe?
@strokerIROC
7 ай бұрын
How is the low end torque with that camshaft?
@-OokySpooky-
7 ай бұрын
Better than stock that's for certain lol
@strokerIROC
7 ай бұрын
@SectionEightLife what makes you sat that? If you don't have a decent stall converter and rear gears, a big cam can kill low-end torque.
@-OokySpooky-
7 ай бұрын
@strokerIROC I've got 2 sbcs with thumprs, a 305 that sounds like Satan bc fixed low vacuum caused by the cam by cranking up idle speed, so it sounds like a full tilt track car, and a 350. I know for a fact that 350 has more low end spirit than it used to and I'm pretty certain it's because although the cam isn't as tuned for low end it's not horrible and breaths significantly better than the emissions suffocating cam that it came with. Can't say for the 305 bc I put 410s in the rear so it's not a fair assessment.
@gordocarbo
5 ай бұрын
@@strokerIROC Correct..cant tell some guys anything they havent been dusted by a mild combo thats geared right and makes killer torque. My first lesson was being blown away bad by a well built 70s 3/4 ton BB truck .Wasnt even a race lol
@gordocarbo
5 ай бұрын
@@-OokySpooky- Having to crank up the idle speed to keep it running is a sign of perhaps the wrong cam
@masegauntt9085
5 ай бұрын
What rear end gear ratio? Also what stall converter are you running?
@vj4789
4 ай бұрын
3200 stall and 273 gear. Putting a 373 in soon.
@oldfart8501
24 күн бұрын
Love that clean engine compartment 👍
@artbrady8581
4 ай бұрын
What is your timing set at an r.p.m?❤
@vj4789
4 ай бұрын
Timing is 20 base and 800 rpm
@user-hw6qq3rq8t
6 ай бұрын
Sounds great! Are you running a X Pipe?
@vj4789
4 ай бұрын
No. I want to get a x pipe soon.
@garrickalbritton3995
Жыл бұрын
What cam and compression are you running
@mattb4386
9 ай бұрын
Read the title. It says the cam
@p.b.sHUNTING
5 ай бұрын
@@mattb4386no cam specs were provided hoss…. Look how many “mutha thumper” cams there are.
@strokerIROC
5 ай бұрын
For a sbc there are 3 : Thumpr, Mutha Thumpr, and Big Mutha Thumpr
@p.b.sHUNTING
5 ай бұрын
@@strokerIROC but for which lifter setup…. Flat tappet, hydraulic roller, solid roller….
@strokerIROC
5 ай бұрын
@p.b.sHUNTING You got me there...I didn't consider the lifter options.
@brandonjordan1273
9 ай бұрын
What brand mufflers
@smokeytheram6982
8 ай бұрын
Black widow venom 250s
@KNOWLEDGELEARNED
3 ай бұрын
Usually when guys don’t tell their setup is cause they sometimes didn’t build the setup their self .. but I’m not judging them at all I just don’t have the funds like they do and I could be wrong also
@vj4789
3 ай бұрын
What you want to know about the setup????
@Sam_Sorenson
2 ай бұрын
Judging by his garage I’m sure he built his setup, buddy
@vj4789
2 ай бұрын
I 100% built the setup. Engine is a 355 with edalbrock heads and intake, comp gold rockers, mutha thumper cam and Holley sniper fuel injection. Truck has a 350 trans with a 3200 stall. Exhaust is headman stainless headers, 2 1/2 exhaust with venom 250 mufflers. No x or h pipe.
Пікірлер: 56