I believe crow recommended this this for most Square port applications as it responds best. What a huge dyno result for a 6L! Great job Strathi for the videos 👍
@DUK33Y
Жыл бұрын
I had this cam installed along with CnC heads & raising the comp to roughly 10.8:1 as recommended by Castle Hill Performance/Exhaust and man it is awesome. Mine's manual and would be able to daily it if I wanted to. Power everywhere but definitely above 2500-3000. Had the idle tuned to be choppy as and couldn't be happier. Kids love how it sounds too. Turns heads for sure!
@IndependentMotorsports
Жыл бұрын
It's a really good cam 👌
@thomasnathan8035
3 ай бұрын
Yeah I tried to explain to my kids before I got my VE SSV Manual Cammed and now they absolutely love it even more
@hillbilly2224
Ай бұрын
Great package and results 🤙🍻
@scottroberts3158
Жыл бұрын
Isn't this the same cam you put in my VE to replace the VCM13 I had in it when it dropped a lifter? 345kw at the hub in a manual VE with no heads, from 330 with the VCM13 was a nice surprise, and way more drive-able on the street as a manual as well. More important, the blokes knew that my mrs and I liked the VCM13 and didnt try to convince us to go with something smaller, just put in a nice big cam like they knew we wanted.
@IndependentMotorsports
Жыл бұрын
I do believe that was the cam we used.
@EugeneSamuel-h9w
11 ай бұрын
You know that noise means business.thank you.i might ring you
@Ryan_PRO8
Жыл бұрын
I really like that camshaft stathi!! That’s spot on I like the duration and lobe separation sounds good!! My 1289 gets a bit hectic on the kinder run lol…
@kanelintern6258
Жыл бұрын
Great job, great video as always and awesome car 👏
@bigal878
Жыл бұрын
What a great combo 👍
@IndependentMotorsports
Жыл бұрын
Sure is mate when used with a good converter this camshaft and cylinder heads is the best street combo.
@steve1714
7 ай бұрын
Looks like an unlocked converter run? If so great numbers.
@gtools9137
Жыл бұрын
Great work as usual. I would like to use this cam in my L77 manual, would you consider it good for a daily driver?
@IndependentMotorsports
Жыл бұрын
Thanks mate it's very streetable
@AndrewMitchell001
Жыл бұрын
I used a roadblaster 3200 and it exploded after 2 years and destroyed my gearbox , hope yours stays together..
@IndependentMotorsports
Жыл бұрын
Been using them for well over 5 years now and we have never ever had a single problem with them. A lot of people are quick to blame a product when it fails without taking into consideration why.
@AndrewMitchell001
Жыл бұрын
@@IndependentMotorsports Ill give you my gearbox builders number if you like he is the person who had the convertor cracked open by ASNU convertors in Brisbane and was told that the convertor was the failure point, the whole process just cost me 6000 bucks there was not one part of the convertor that was reuseable the whole thing was destroyed.
@matt7678
Жыл бұрын
You mentioned the camshaft as a 114Lsa, but on the Dyno screen it shows 112? Or is that 112 two degrees advanced on install?
@IndependentMotorsports
Жыл бұрын
@@AndrewMitchell001 I'm not here to argue I'm just stating the fact that we have never had an issue with them so when someone else reads your comment they can see my response. I have seen some pretty bad transmission calibrations where people are trying to do too much with the torque converter settings and in return that can make a converter fail. Sometimes it can be more of a tuning issue as opposed to a mechanical issue, The issues that you had is between you,your tuner and your transmission shop and the converter shop to talk out between each other to determine the exact reason for the failure I just don't like people blaming a product for a mechanical failure without giving the exact reasonings behind the failure. I'm not having a dig at you I just like to be clear and accurate As a lot of people get their information from comments and can sometimes be let down the wrong path.
@IndependentMotorsports
Жыл бұрын
@@matt7678 My apologies it is a 114 I made a mistake on the dyno sheet.
@darcyballard3348
10 ай бұрын
So I’ve just bought this cam to go with a side mount supercharger will it work well?
@IndependentMotorsports
10 ай бұрын
Yes it will work quite well
@Syfrha
Жыл бұрын
How come Blackwell cnc heads and not Higgins or another? Same same, just paying for the Higgins brand? $$$
@IndependentMotorsports
Жыл бұрын
We have been working very closely with Blackwell for a very very long time and I just couldn't go anywhere else.
@pxgodx
Жыл бұрын
What exhaust is that?
@Pittaz
2 ай бұрын
Pacemaker
@johnsbackwithcommonsense7628
Жыл бұрын
Orea Munga.
@stevenkirk2563
Жыл бұрын
Rwkw are a little high for a cam n heads.
@lisanorm2458
Жыл бұрын
VE-VF LS2, L76, L77, L98 Packages Stage 5 Package Package Includes: • ECU Re-program • VCM Performance MAF OTR Cold Air Intake • VCM Performance infill panels • K&N High Flow air filter • 3” catback exhaust system • 1 7/8" Stainless Steel headers / 3" Cats • Penrite Motor Oil • Genuine GM Oil Filter • Penrite Coolant • Timing Cover Set • Cam gear 4 sensor • Cam Bolts • GM balancer bolt • Performance Camshaft • CNC Heads • PAC1511X LS Pro Beehive Valve Springs • Brisk Spark Plugs • Head gaskets • Head bolts • Lifters
@IndependentMotorsports
Жыл бұрын
I don't think so,Its actually very consistent and in line with everything that we do. This is done on our hub dyno that has backed itself up time and time again at the drag strip. And before you tell me that hub dynos read high go and watch the video that we have on our channel comparing our roller to hub dyno. Cheers 🥂
@7071t6
Жыл бұрын
WOw for over 10k its not worth it, but each to their own i guess. :)
@IndependentMotorsports
Жыл бұрын
If you can afford it enjoy your life And do what makes you happy. You only get one go at it.
@7071t6
Жыл бұрын
@@IndependentMotorsports yes if you can afford it, i cant, but do have a stock VF series one Redline, put rear Brembo's on it and DPE rear mufflers, that's it? WOuld love to have Magensun 2.3 DOD Delete and good Quality Lifters Pushrods, Springs and retainers etc etc, so it has around 350KW to 400KW and with good AN fitted Trans cooler and circle d convertor , after all the auto can handle that much any more than your risking the auto, plus the auto needs to be tuned to the power as well? So around the 15K to 20K mark?🚗🚗🚓🚓✌✌👍👍😀😀
Пікірлер: 37