I can not understand why Starlink wouldn’t take into account that the vast majority of rural homes have 10-12” over hangs with 4-6” gutters. They need a pipe extension to go up passed the edge for the dish to clear the house and/or a mount extension to come out far enough to not have obstruction from the house.
@tavis2299
11 ай бұрын
Exactly my problem. I have a 16" overhang and 6" gutter. It would be nice to have a sliding arm section on the mount to get past the gutters. Now I have to go by some pipe and build my own mount.
@DerrickLytlephoto
9 ай бұрын
Because they've never left a city before
@timberterra
Жыл бұрын
What is the stand-off length this sets the mount beyond the wall? I cannot find that in any literature.
@MasterTheNEC
Ай бұрын
Where did you order the extended arm mount. When ordering on StarLink it doesn't seem to show an extended arm mount option.
@bigneilh
11 ай бұрын
I wonder if you could drill through the plate on the wall portion to get the wire into the house without every coming out of the arm?
@curranhouse
9 ай бұрын
Excatly what I did, drilled through the plate. Poor design by starlink :)
@Grumpygrandad68
4 ай бұрын
OMG is it just me that wanted to see that cable being tucked neatly in the tongue and groove slot ????
@krzysztofkolczynski2740
Жыл бұрын
It seems the dish is mounted to close to the house. Doesn't it interrupt starlink dish rotation?
@StarlinkHardware
Жыл бұрын
It can if you have a larger overhang like my roof, yes. In my case, I actually switched to a short wall mount that is directly mounted to the fascia board. Hoping to have that tutorial/review soon!
@420loaf69
Жыл бұрын
@@StarlinkHardware did you ever do this tutorial? I'm having a hard time finding a stud in the fascia board.
@techguy9023
8 ай бұрын
Why mount the bracket with the open side up to collect rain and freeze?
@Ironsja11
7 ай бұрын
I don't like the looks of that either.
@luizyto7669
3 ай бұрын
Hi, I was wondering the same, if it is not upside down but I tried it in reverse and the antenna does not fit.
@omarcaneomedia
Жыл бұрын
I don't understand why the top of the mount is exposed, it's just going to collect water and crap in there and be a pain to clean. The top should be covered I think.
@rangermadeknives
Жыл бұрын
100% agree! Any water is caught and directed toward the house.
@luizyto7669
3 ай бұрын
Yes, I did not put the top for that reason. I think it should be upside down but the antenna does not fit.
@robertbenoit5374
8 ай бұрын
I must be privileged I don't need a stud finder my house is made of Brick. haha. I just need a Masonry drill bit and a Hammer drill good to go sir. My biggest problem is right now I have a small blockage where my starlink is currently mounted and I need to get it clear of the Eave so that it gets a full clear view of the sky. I am not sure what to do because the mount is at full extension. I did not buy the official Starlink Long mount because I did not believe it would work on my house. I bought a different mount which was way easier to install but it is full extension and will not clear the obstruction.
@tallcanadian
Жыл бұрын
All that and you didn’t show what it looked like. 🤦♂️
@adamgeoghagan9524
6 ай бұрын
My kit was missing the lag screws what size are they?
@DaveBowman345
Жыл бұрын
My overhang is 20" from the fascia to the wall. Is this long mount long enough for me?
@StarlinkHardware
Жыл бұрын
I don't think it would work well for a 20" overhand.
@jasonmiller9313
Жыл бұрын
It's 17 inches long
@DaveBowman345
Жыл бұрын
@@jasonmiller9313 Thank you. 👍
@danschuster2255
10 ай бұрын
@@jasonmiller9313 it is 15.5" from wall to pipe
@busta1n2
Жыл бұрын
No full shot of the final install.
@jimlelan4906
11 ай бұрын
Can I use a DISH Network mount, already mounted to the house to mount the very recently acquired Starlink dish?
@yoruneko34
11 ай бұрын
I saw youtube video on that precise topic
@nolanrupert3058
Жыл бұрын
Hello good day sir! I’ve got a question, does the lug nut bolts come with the wall mount?
@StarlinkHardware
Жыл бұрын
Yes, it includes the lag bolts needed to secure it to a wall.
@nolanrupert3058
Жыл бұрын
@@StarlinkHardware got it, thanks !
@Steamerbeen
Жыл бұрын
Do you need slack on the cable for when it moves?
@AndreFTSG
9 ай бұрын
No.
@gotiger1134
Жыл бұрын
Does it come with the cable straps for running the cable down the wall
@StarlinkHardware
Жыл бұрын
Yes, it includes cable ties that screw into the wall.
@gotiger1134
Жыл бұрын
@Starlink Hardware sorry I watch it but could listen. 😆 thanks.
@mdouville1
Жыл бұрын
they advertise 50ft of cable for set up but they actually give you 75 ft is that correct?
@StarlinkHardware
Жыл бұрын
They recently changed the included cable from 75 ft to 50 ft. So if you buy a kit now, you'll get the 50' cable. The 75' and 150' lengths are available to purchase in the Starlink shop if needed.
@robertbenoit5374
8 ай бұрын
They did not send me 75 feet of cable. I think they changed it to 50 feet. My cable barely reached from the office where my computer equipment is located to where my dish is mounted. I tried before I mounted my dish, to find the best location using the stand that they sent me. Tested it for 4 days before officially mounting it and the best location was at the furthest point naturally, it would have to be. SO I found and extension kit which is usually used if a critter bites through your wires and that nifty wire comes with Ethernet RJ45 connections built in (which is pretty awesome) and covers over those connections. I actually didn't need it, but it was good to have as I tried several different things to get the best location and fastest speed possible. I didn't bother with the stupid app find the clear sky unobstructed view and all of that garbage. I have 2 eyes in my head for a reason. I can see North and I can see where there is no trees. I guess they wanted this to be able to be installed by everyone no matter your tech skills which is fine.
@mdouville1
8 ай бұрын
i got 75 feet just barely made it to my dish and computer. they give you 50 but i special ordered 75.@@robertbenoit5374
@alkalimusa7564
Жыл бұрын
What is the area of coverage of starlink business?
@StarlinkHardware
Жыл бұрын
All of the US, you can check your address on Starlink.com/Business
@TheDeanBlain
6 ай бұрын
Will this work with Gen 3?
@StarlinkHardware
6 ай бұрын
No, the mounts are not compatible between the generations.
@cobtu
Жыл бұрын
muchas gracias
@ignacio0075
Жыл бұрын
can you answer me a question?
@StarlinkHardware
Жыл бұрын
Sure what can I help with?
@ignacio0075
Жыл бұрын
@@StarlinkHardware first, What's the difference between the FLASHING MOUNT and the PIVOT MOUNT? And about the LONG WALL MOUNT do you know if it can be used in extreme climates, I live in a place with very strong winds capable of knocking down large branches, and I am afraid that my starlink could blow away?
@StarlinkHardware
Жыл бұрын
@@ignacio0075 The pivot mount bolts to the top of the flashing mount. The flashing mount just provides a more water resistant way of installing to a shingle roof. So you need both if you decide to do the flashing mount. The long wall mount is capable of handling strong winds, as long as you properly install it.
@ignacio0075
Жыл бұрын
@CHIGOZIE ATUEGBU hi when you buy the starlink it only include the tripod, but when your order it s preparing, you can buy more things in the store and added to your package
Пікірлер: 50