Man is out here, doing God’s work. This information is so interesting and valuable. Thank you.
@LandtoHouse
3 ай бұрын
This drill pumps will save so much time and effort getting the drive pipe filled.
@ayatti26
3 ай бұрын
Very Clever.
@LandtoHouse
3 ай бұрын
Thank you.
@protogenxl
3 ай бұрын
They should make the drive shaft of that pump 1/4 hex
@LandtoHouse
3 ай бұрын
I thought the same! Perhaps that takes more cost in manufacturing.
@MultiKlompen
3 ай бұрын
It reminds me ob starting your microhydro with a shopvac
@LandtoHouse
3 ай бұрын
That's true. Best way to start a siphon is to use an external pump.
@1981dasimpson
3 ай бұрын
so in thoery you could use this not only to fidd the drive pipe but also the delivery pipe meaning for less clicking of the valve to get going
@LandtoHouse
3 ай бұрын
That is very true. I will film and post that video this next Saturday.
@sestun
3 ай бұрын
I thought you gonna use it to fill the delivery pipe. If it has a decent lift, it could save on the 100 clicks to start the siphon on its own.
@LandtoHouse
3 ай бұрын
Haha that video is coming up. It also saves tons of time.
@bullithedjames937
3 ай бұрын
Neat.
@LandtoHouse
3 ай бұрын
It's a game changer.
@bullithedjames937
3 ай бұрын
@@LandtoHouse With the ram pump installed? Could you use that to prime the supply line too? That would be the biggest game changer
@LandtoHouse
3 ай бұрын
Yes! That's the next video coming up next week. So much better than clicking the valve 100+ times.
@FreeSCV
3 ай бұрын
Can You start a ram pump from the source's overflow landing on the spot You tap to prime/start it? Will flowing in the tap outtake spot being hit by continuous water after starting screw it up Bud? Love Your vids!
@8thdaychronicles
3 ай бұрын
Great info! Thanks for sharing!
@LandtoHouse
3 ай бұрын
Thank you. This works very well.
@Someone-A3
3 ай бұрын
What if we use a ram pump in a loop by using a water pump that doesn't lift water? The motion of the water runs the ramp pump and that captures massive air pressure in a tank. Is the air pressure greater than the water pump?
@jllaine
3 ай бұрын
That's too cool. Get/make a garden hose to NPT fitting/adapter so that you can connect the output of the drill pump to the threads on the top of the waste valve. You can fill both the drive pipe and the delivery pipe by pumping water down in through the top of the waste valve. Using the ball valves you can first fill just the drive pipe, then fill just the delivery pipe. Might save you that 100+ pushes on the waste valve with your "land to house" branded custom made push-stick!
@LandtoHouse
3 ай бұрын
Great idea! I will make that fitting and include it in a video showing how both pipes can be filled from a single connection. Thank you.
@Bozemanjustin
3 ай бұрын
2:10 or since you have to have a water source that's higher, don't bend your pipe down If you had to bend your pipe down instead of doing that you could just stack Up some stones to create a small damn to lift the water level up a little bit I mean you literally have flowing water coming from high to low and you're trying to figure out how to get it in a tube And your answer is to use a power pump to pump it uphill Talk about working against yourself and fighting as hard as you have to
@LandtoHouse
3 ай бұрын
I have worked with the ram pump for 10 years. Installs are not always perfect like you are suggesting. I am currently installing a ram pump with 200 foot long drive pipe and this drill pump is going to save hours of work getting the drive pipe filled.
@tchamp72
3 ай бұрын
Could you also use this to pre-fill your delivery pipe so that you don't have to spend so much time cycling the ram valve manually?
@LandtoHouse
3 ай бұрын
You sure can! I will make that video next.
@tchamp72
3 ай бұрын
@@LandtoHouse Just saw that video! Not sure if you had already thought of this, but I was half expecting to get a call-out in your second video.
@ashleygriffiths3870
3 ай бұрын
Do you sell rampumps?
@LandtoHouse
3 ай бұрын
Yes I have 4 sizes available. Links in the video description.
Пікірлер: 29