Follow up video on getting the illumination and multifunction to work on the steering swap on my Porsche 997.1 turbo to 991.2 Steering wheel from a 2016 Macan. Installed the updated steering wheel module from a 2010 BoxterS and gpsadapter and enabled the multifunction using Foxwell NT-520 scan tool
I lucked out with a used steering control module from eBay that came off a wrecked 2010 BoxsterS and didn't have to program the steering angle sensor, cruise control, etc. If you buy a new module, these will need to be programmed with a PIWIS tool (dealer).
To get the steering wheel multi-function to work (or to get paddle shifter to work if you have Tiptronic), I had to swap out the steering wheel module with part# 997.613.289.01 which I replaced with a used complete center column switch assembly from eBay. This will require programming from the dealer or someone with a PIWIS or in my case, I got lucky as I was able to do it with the Foxwell tool and I didn't need to re-calibrate the steering angle sensor. I also had to get a STMV1 adapter from gpsadapter.us. I removed the paddle shifters as my car is a manual and replaced the shroud with part #95B-419-798-B-5Q0 to cover the opening.
Негізгі бет Автокөліктер мен көлік құралдары Steering Wheel Swap Part 2
Пікірлер: 143