Just got this saw second hand. Your video speed started my acquaintance with everything. Thanks!
@daviddejong187
2 жыл бұрын
I've had mine for 2 years. Excellent little saw
@mikeculver
7 жыл бұрын
Just got the ms-211 c-be yesterday(no manual with it floor demo) ... this video does it all. Very clear and well made set of instructions... Stihl should hire you ;)
@thedude8716
5 жыл бұрын
This is a great saw. I have owned mine for several years. Very easy to start. Easy to use. Very dependable.
@patricklacombe3967
8 жыл бұрын
Thanks for the video. The book didn't have much instruction on tightening the chain but your video answered all my questions. Love my Stihl 211-C
@rob.1963
4 жыл бұрын
You should always hold up the bar end/nose when adjusting chain tension. Finally tighten down bar, with the bar end in it's upper most position.
@jameshert9183
4 жыл бұрын
Adjusting wheel and screw that holds wheel on bar fell into high weeds when I took cover off. Had no idea I should check that screw for tightness. Must have been made on Monday. Love the easy start though.
@AlaskanFrontier1
10 жыл бұрын
I cant wait to get my Stihl!
@chiranagheorghitaeugeniuth98
3 жыл бұрын
keep the bar up when you tighten the chain and the "nut"
@user-qc9lw6ji2l
Жыл бұрын
PS The choke settings are quite clear .. but when you push the lever down to full .. it just comes back up ? Everything else on the video is excellent thanks.
@josebenitez5131
Жыл бұрын
Good demo, help me a lot. Thanks so much
@buccarastaa
3 жыл бұрын
Great video thank you. Lots of useful info.
@Tomson251
8 жыл бұрын
Great review! Bought one second hand because of it. Thnx
@Mountainbum1876
8 жыл бұрын
+T Tom Glad you found it helpful. Thank you for the comment and for watching! Take Care!
@thyresias194
7 жыл бұрын
Thanks bro from France for your video ;-)
@AlaskanFrontier1
10 жыл бұрын
Great overview definitely learned a bit from this vid
@Mountainbum1876
10 жыл бұрын
Thanks Matthew! I left out a few things though. What chainsaw are you looking into getting?
@AlaskanFrontier1
10 жыл бұрын
im thinking this www.stihlusa.com/products/chain-saws/farm-and-ranch-saws/ms311/ with a 20 inch bar
@Mountainbum1876
10 жыл бұрын
AlaskanFrontier1 very nice!
@sambulldogg3633
9 жыл бұрын
i kinda want one that can cut through concrete that i can edc
@user-qc9lw6ji2l
Жыл бұрын
You don't show the one thing I need to know .. the choke settings ?
@ryank.pfankuch1732
10 жыл бұрын
Did the spikes come with it or did Stephan give it to you? Are you starting woodland or something?
@Hollowalone1
9 жыл бұрын
Thanks for the video. Was wanting to pick up the ms211 but was concerned over the wheel on the bar and its durability. Do you find you have to adjust tension more often then the normal side tensioner? Again thanks for sharing
@Mountainbum1876
9 жыл бұрын
Hollowalone1 Not at all I have used the saw a lot more since this video and haven't needed to adjust the tensioner anymore often than the normal side tensioner. Glad you enjoyed the video. Thanks for watching!
@Andersbork
10 жыл бұрын
Great saw my friend! In my opinon a great tool to have:) Very nice features normaly i do not like plastic but i know that Stihl would not use it if they did not trust it.. Great demo btw! All the best buddy:)
@Mountainbum1876
10 жыл бұрын
Hey Rob! Its good to hear from you! Hope all is well? Thanks for watching my friend!
@Andersbork
10 жыл бұрын
Yes i am fine thank you for asking. Although work keeps me busy seven days a week but i hope to get back here and catch up soon.
@zombiefighterof1987
8 жыл бұрын
Is there a difference between the MS211 and the 211c?
@Mountainbum1876
8 жыл бұрын
Sorry I am not sure.
@bentrotter5861
8 жыл бұрын
Easy chain tensioner vs the old school two tightening nuts on the chain bar side.
@Wanous-hv7zo
7 жыл бұрын
ZombieFighterOf2001 yes there is. the 211c has easy start and a primmer bulb and quick tensioner
@Mountainbum1876
10 жыл бұрын
STIHL MS 211C Chainsaw Brief Overview and Start Up
@dramagang5337
7 жыл бұрын
FarWest Colorado
@mackgilley9744
2 жыл бұрын
You forgot to record the COLD start. Right. How about a two minute video that shows a cold start?
@aaronroberts5685
3 жыл бұрын
By far the weakest saw I've dealt with. Fine for trimming smaller branches
@Wanous-hv7zo
7 жыл бұрын
i own a saw shop and also cut a lot of wood. i also sell saws at my shop and i am a Stihl guy but i have to tell you the new Stihl homeowner grade saws are very cheap built i meen CHEAP BUILT it makes me sick. the 211 is a nice saw but so flimsy the bar cover is so thin you can bend it what the hell Stihl??? the ms 210 230 250 are way better built saws than this new garbage and they come in my shop burnt up all the time. the quality is out the dam window. and that m-tronic is garbage to less power mor fixing its SHIT guys are pissed off huskys are even worse. Hey guys keep fixing those ms 440 460 461 660 they will outlast any of this new shit. i have already removed over 30 661 saws to regular 660 carb and coil. boy do they rip then
@Mountainbum1876
7 жыл бұрын
Thanks for your comment. I agree the plastic cover is a turn off. I did however drop the saw from a height of about 15 to 20 feet and it held up fine. I do love the older stihls and older huskys. They dont make em like they used to.
@Wanous-hv7zo
7 жыл бұрын
i own a saw shop and also cut a lot of wood. i also sell saws at my shop and i am a Stihl guy but i have to tell you the new Stihl homeowner grade saws are very cheap built i meen CHEAP BUILT it makes me sick. the 211 is a nice saw but so flimsy the bar cover is so thin you can bend it what the hell Stihl??? the ms 210 230 250 are way better built saws than this new garbage and they come in my shop burnt up all the time. the quality is out the dam window. and that m-tronic is garbage to less power mor fixing its SHIT guys are pissed off huskys are even worse. Hey guys keep fixing those ms 440 460 461 660 they will outlast any of this new shit. i have already removed over 30 661 saws to regular 660 carb and coil. boy do they rip then.
Пікірлер: 41