Dude....thank you for making this. I got one of these given to me in a box of parts. Similar situation with the handle. Helps me out a lot!
@rockyholt4060
Жыл бұрын
Thanks for taking the time to educate people like myself
@tgonnabe
Жыл бұрын
Should I buy the part number on the bag or the part you put in? Thanks! Appreciate the tutorial. Especially the part about buying the assembly instead of the pieces.
@richardflagg3084
Жыл бұрын
Yes, as long as it's an MTronic version. The non-MTronic has a different housing. The only thing the handle assembly doesn't come with is the throttle rod that hooks to the right side of the carb. I've seen them missing on a rare occasion depending how bad it's broken.
@Limp_Briskit
2 ай бұрын
Right on brother
@ramonduivenvoorden518
2 ай бұрын
Hi Richard, Can the ignition module also inspected with your multimeter? And what schuld be the readings? Thx in advance, Ramon
@fremontshields1185
Ай бұрын
Thank you so much for the excellent video. The part I bought wasn’t as expected bought 201t and it should have been 201tc-m) and I had to transfer the old wiring harness to the new one and plug some adjustment holes back by the carb that the tc-m doesn’t have to keep debris out. Your video kept me from making matters a lot worse. 😂
@colinquin1151
4 ай бұрын
just watched this to help me fix my 201T. Was great and everything works/fits together perfect now
@steverahn4951
2 жыл бұрын
Another master class from a super teacher!
@steverahn4951
2 жыл бұрын
Another master class video from a super teacher!
@Wakeupdud3
Жыл бұрын
Is it possible to use non mtronic handle assembly with an mtronic chanisaw of this model
@richardflagg3084
Жыл бұрын
Nope. The main reason is the non MTronic doesn't have the channels to run the wiring harness through the top handle. There are other differences, but this one is the real deal breaker.
@Wakeupdud3
Жыл бұрын
@@richardflagg3084 I agree, I was just looking at that. Sure there might be a way to safely have it routed threw there but why go threw the trouble. I’ll just get the right handle assembly. Dealers over here. Don’t know what chainsaws are. Lol atleast the part department doesn’t
@richardflagg3084
Жыл бұрын
@@Wakeupdud3 Good call. I didn't go through all the differences as there are many besides the wiring. Choke and throttle linkages, kill switch, air filter base etc. IIRC the part number is in the video. if not the Stihl part number is 1145 790 1024
@Wakeupdud3
Жыл бұрын
@@richardflagg3084 right on brotha ! Thank you
@Wakeupdud3
Жыл бұрын
@@richardflagg3084 right now I have an ms200t that has been leak tested 10x lol, and no leaks not even when turning crankshaft it’ll hold 8.5 all day and vacuum, I set carb without limiters at 1 1/4 each and it won’t kick over, unless I spray some fuel into the carb, then it’ll run crazy for awhile until I take it off choke and squeeze the throttle and as soon as I do that it’ll die at high rpm, I blocked off that Welch plug already. Might need a new carb?
@MrThomich
Жыл бұрын
Thanks a lot from France, help a lot! Cheers
@phillipakin8215
10 ай бұрын
Excellent video
@brettsmith9952
3 ай бұрын
Great video! Me and a friend used this video start to finish and did it perfectly.
@richardflagg3084
3 ай бұрын
Nice!!
@llewynransom7908
3 ай бұрын
Blow your nose brother 😂 great video, very informative!
@timothycarey4629
Жыл бұрын
I have one that won’t idle was wondering if it could be the wires in the handle or something on the carburetor
@richardflagg3084
Жыл бұрын
If it's an older 201tc, it may be the fuel solenoid. Typically if there is a bad wire it won't run at all. It will just pop off and that's it. If the coil doesn't get a signal from the carb it shuts itself down.
@richardflagg3084
Жыл бұрын
May also be a good idea to pressure and vacuum test it. It could be an air leak. Hard to say without having it on the bench.
@ICKYbom3
Жыл бұрын
Thanks for the vid, much appreciated, just did my first handle.
@usasolution4767
2 жыл бұрын
thank you for sharing your experience with us
@jasonchinnock4877
Жыл бұрын
Thanks man perfect video for me to follow 1st time stripping an expensive saw and nailed it. Appreciate the video
Пікірлер: 32