Don't speed them up brother, your explanations are part of what makes the video better. If anything I say slow down and share as much information as you can. At least that's what I like. Keep up the great work!
@DaveyBlue32
2 жыл бұрын
I’m with you Will… I want all the information that I can get. They tell these guys to make short videos to hold peoples attention but it kinda seems to me that the chainsaw world guys don’t fit that mold…if they like how a guy teaches and shows his work we’ll watch everything to the end to see what tips and tricks we can learn. I also love to find a great guy to watch do tear downs …because if I’ve got to rebuild a model that I’m not familiar with…I can watch him tear down a saw and repeat his procedures and save myself a lot of time and effort! 👍😁
@vinzer8808
2 жыл бұрын
Probably the most comprehensive porting and explanation of saw mod on KZitem, you sir are in a league of your own
@dynojoemods2764
2 жыл бұрын
Thank you. That is a mighty big compliment. Hope I can meet those expectations some day.
@DaveyBlue32
2 жыл бұрын
Paveen that’s what I’m saying also! He does it the right way…or basically the way that I’m now going to aspire to be able to provide a client. The clean and concise before and after data showing the gains made over the RPM range is very professional… he’s definitely one of the most professional porter’s that I’ve been able to see. I’m definitely convinced that providing the dyno information for your clients is a huge part of doing this business properly and professionally. There’s a lot of us guys who can get gains from an engine…this guy can include your printed out document showing your power curve … high lighting your gains on paper on a graph!!! Dyno Joe is my new porter hero!! 😂😂😂😂. He also doesn’t go way overboard ripping the exhaust port out without any intake enlargement like several popular guys do… in my exhaust most exhaust ports are too big to start and definitely don’t need to get enlarged more…! 😂😂😂😂. Saw one of those oem 288’s that you sent over… very neat!!!
@vinzer8808
2 жыл бұрын
@@DaveyBlue32 good to know im not alone! Too many folks out there claiming their work is this and that. Finally we have a mechanism to test and proof what their builds can do or is at, now watch thrash talking dwindle lmao. Thank you sir, outlaw saw supply at your service! 😁
@GripFreak
2 жыл бұрын
Outstanding work sir! As an Echo repair specialist I can state with certainy that even though this is a Stihl saw you have a solid understanding of every aspect of two stroke theory and operation not to mention your experience is very obvious. There's another channel (Tinmans) that is a cool channel but he is more along the lines of having fun by experimenting BUT he has made inaccurate statements and claims. You are in a class by yourself sir! There's a Chinese proverb that states, "without no data your chatter don't matter". This is where you shine! You have the data to back your claims. I would even go as far as saying that your work could be classified as a scientific setting like in a research facility. Would love to hear your backstory and your experience. Keep up the outstanding work and thanks for sharing! Your skill level and understanding is on another level. ✌
@brandongouge
2 жыл бұрын
Personally, I like the long format videos where you take the time to explain as much of the process as you can within reason, of course. Also, I like how the cinematography is progressing and you seem to be getting more comfortable with the camera. Keep ‘em coming brother!
@dynojoemods2764
2 жыл бұрын
Thank you. I am going to try and incorporate long and short content.
@jasonjenks2609
2 жыл бұрын
Nice work Mr. J - I'm digging this format.
@dynojoemods2764
2 жыл бұрын
Thank you. Might try to do 1 a month or so... These take a ton of time... Maybe on super popular saws.
@IndianaDoug
2 жыл бұрын
I guessed 100hp, wow, closer than I thought. Jokes aside, having the dyno is a Godsend man, the numbers don’t lie. And when you’re gaining 1.5+ cutting torque, that’s money well spent for this tree company. It’ll save them time and money. It’s an investment!
@dynojoemods2764
2 жыл бұрын
100 hp and 30lbs would be very wild.... I have a feeling these will get put right into service.
@JohnnyIDive37
Жыл бұрын
Joe you are at the cutting edge of what you do to these saws incredible work !
@motorsawing6739
2 жыл бұрын
Great video, plenty of content to justify the length, all killer no filler as they say.
@dynojoemods2764
2 жыл бұрын
Thank you.
@DEEREguy1982
2 жыл бұрын
Love this video Joe! Awesome to see my saw on video getting worked!!
@dynojoemods2764
2 жыл бұрын
Glad you liked the video.
@marktcso
Жыл бұрын
I would love to see those tuned saws on the dino with pipes!
@jimholz1102
2 жыл бұрын
You don't need to speed things up, the pace of the video is fine. Maybe figure out how to get good closeups of chamfers etc. Those saws should be able to pull long bars in big wood. Love the digital degree wheel.
@dynojoemods2764
2 жыл бұрын
Thank you for the feed back. I am still trying to learn video/lighting/editing. I plan to step up those areas each time. Trying to gather all the lighting and film gear still. These saws were built with that long bar pull in mind. Heavy piston and limited rpm coil. No reason to try and push power up high.
@iraagans3144
2 жыл бұрын
Great video! Really shows the skill and craftsmanship that goes into just a simple port job. I would have totally sneezed when putting the bevels in!
@dynojoemods2764
2 жыл бұрын
Thank you Best to get the sneezing out of your system, before your at the grinding bench
@latinodeathjazz
2 жыл бұрын
I’m new to porting having learned just for something to do over COVID. These videos are so helpful, especially seeing how you can utilise a lathe to manipulate your numbers. Thanks for taking the time to make these 👍🏻 You have yourself a new subscriber.
@dynojoemods2764
2 жыл бұрын
Thank you for watching. If you have any porting questions let me know. I will do my best to try and help.
@230e4
2 жыл бұрын
"They'll think we have 4 hands" 😂 Nice lathe. Excellent job on the video and your work! 👍
@dynojoemods2764
2 жыл бұрын
Thank you
@MattsTreeServiceAberdeen
2 жыл бұрын
Loved the video.... I had a basic idea on what you did when porting a saw but seeing it happen step by step is really cool. Thanks Joe
@dynojoemods2764
2 жыл бұрын
Thank you!!
@theconstitutionalmule9219
2 жыл бұрын
Dude hats off to you ! Absolutely the best video on porting that I have ever seen.
@dynojoemods2764
2 жыл бұрын
Thank you. Appreciate the kind words.
@spdillingham
2 жыл бұрын
Love your content and format, I really appreciate the tech. & the use of a dyno to prove the changes & improvements on the power mods! I figured you were in a "big timber" state, turns out we're in the same area code lol. Thanks for a great channel!!
@dynojoemods2764
2 жыл бұрын
Thank you. Would be neat to tour out west and see the big timber areas.
@thomasgronek6469
2 жыл бұрын
Thanks Joe. The speed is fine, and we can always bump it up to 1.5X , (or more) playback speed
@Bigcheif360
2 жыл бұрын
Great video. Very in-depth and explained well. No need to speed up the process or edit out.
@mfsaws8240
2 жыл бұрын
Blown away with the pride you take in your porting. I port at home just for me and a few buddies and I’ve never played with machining the inside of the cylinder only the bases. Great work!!
@dynojoemods2764
2 жыл бұрын
Thank you!
@jayce43420
2 жыл бұрын
Loved the video! You did a great job, very comprehensive. I would like to see one on a ms661
@richardf9137
2 жыл бұрын
Love this type of video and your Generosity in Sharing it with Us!!
@dynojoemods2764
2 жыл бұрын
Thank you. Very welcome. Let me know if you would like to see any other topics.
@Andyshine77
2 жыл бұрын
Good gains right there, excellent work!
@dynojoemods2764
2 жыл бұрын
Thank you, I was happy with a first attempt.
@jaydee2620
11 ай бұрын
Very nice. But I get tired after 15 minutes carrying my 372. Ur a hell of a man if u can carry that thing around all day.
@steppoffaith8426
2 жыл бұрын
Spot on brother! Would love to be able to share what we do in a way people can see results. Thanks friend from the saw building world!!!! To many people getting screwed over! But people are wanting more and more 45 to 60cc saws built.
@dynojoemods2764
2 жыл бұрын
Thank you. 50cc seems very popular around here or the 70cc! If you want to send any builds in to run on the dyno just let me know.
@fusnowtiger
2 жыл бұрын
I need to do this to my crappy 070 clone I use for milling. Perfect POS to practice on!
@ellgwapo.1754
5 ай бұрын
That's! Hole of the Zylinder Looks good. Bat the Rest Not soo.
@thomasgronek6469
2 жыл бұрын
Fuel : many folks have that happen, my signature move is to start the saw without the clutch hub, and blow piecesparts all over the bedroom. thanks for the video.
@dynojoemods2764
2 жыл бұрын
I hate when parts scatter..... Thank you for watching
@webster710
Жыл бұрын
I Love this saw
@MrChurch69
2 жыл бұрын
this video is perfect, only vid like it just what i was looking for
@donnywalker4691
2 жыл бұрын
Great video nice work bud
@dynojoemods2764
2 жыл бұрын
Thank you!
@1ybuzz
2 жыл бұрын
Awesome work on those cylinder !!!
@dynojoemods2764
2 жыл бұрын
Thank you
@lagoonrd4173
2 жыл бұрын
Love this type testing .... dyno graph is dope!
@dynojoemods2764
2 жыл бұрын
Thank you
@poparamiro
2 жыл бұрын
Awesome video!
@dynojoemods2764
2 жыл бұрын
Thank you. This was a lot more effort than my other videos, hope everyone enjoys it.
@skrompf
2 жыл бұрын
Awesome. Thanx for sharing!
@wnessnol
2 жыл бұрын
Thanks! Nice lathes. Nice work. Appreciate your sharing the knowledge
@dynojoemods2764
2 жыл бұрын
Welcome. Thank you for watching
@MrChurch69
2 жыл бұрын
wow!
@bemi0604
2 жыл бұрын
Just watched the whole thing. Very informative, interesting and entertaining thank you very much
@dynojoemods2764
2 жыл бұрын
Thank you. And thank you for watching.
@Akkillies
2 жыл бұрын
To answer your question about speeding it up during indicating, I'm hoping you make a lot more videos, you could make a dedicated video for some of the lengthy setups like indicating and tear down and when it gets to the time laps you could add a link if anyone wants to see the detailed version. Just a thought, love the content though.
@dynojoemods2764
2 жыл бұрын
Thank you. I just added the lathe setup video for the 881 cylinder.
@beekone28
2 жыл бұрын
I see you take the time for your mods and work accurately! love to see you working on the lathe as beiing myself a professional cnc machinist. A lot of people don't know how much you can destroy on durabilty when your bore is'nt perfect in line. The video was not to long, some things could get a bit more of explanation. I think it is good to make video's with one mod at the time, because porting a saw is to difficult to show in one video
@artdombroskie7573
2 жыл бұрын
Very impressive. Keep up the good work.
@dynojoemods2764
2 жыл бұрын
Thank you
@DaveyBlue32
2 жыл бұрын
Absolutely awesome video!!! I absolutely love this format for a video…you show the entire story and the data review at the end is exceptional! Absolutely awesome!!! Amazing torque gain at the working RPM range that’s going to be absolutely incredible in running these at work!!! Huge improvement in their performance!!! Huge improvement!!!
@dynojoemods2764
2 жыл бұрын
Thank you I think the owners should be happy. I try to build solid everyday saws for my customers.
@DaveyBlue32
2 жыл бұрын
@@dynojoemods2764 I was really inspecting your porting work in these couple of videos. I know that you’re very conscious about the saw’s longevity being that we are building serious work saw’s here that need to start and idle perfectly all day every day firstly and get a decent power gain without sacrificing longevity. I live the way that you’re careful with your exhaust port window’s and that you don’t blow them out too far. I see a lot of porter’s who expand their exhaust ports a little too much…I haven’t seen any real gains from that so I’m usually good with the exhaust port volume… I compare the intake volume and the exhaust volume and take it from there. Of all the porting work I’ve seen done over the past 10 years if I was going to pay someone else to do port work on one of my saw’s I’d be sending them to you. Your grinding is solid and good quality and you have the dyno to show your before and after data…it’s not “it feels stronger” there’s cold hard facts involved. I’ve got a couple saw’s that I’d like to get put on the old dyno myself at some point…. I’m seriously thinking about trying that tachometer….
@Parkerpalmer987
2 жыл бұрын
That was amazing! I wouldn’t ever need a saw like those. But I still had fun learning from you! Your explanations with data are remarkable. Thanks for all the effort and time you put into this, and for sharing it with us🙏. I’ve got the itch to port my saws now!
@dynojoemods2764
2 жыл бұрын
Thank you. Feel free to reach out "before" you get in over your head porting. Little things can go a long way. Muffler mod, gasket delete, and a little bit of widening is a great first step.
@predatorpwr
Жыл бұрын
Great video
@MrHuntermikey
2 жыл бұрын
Easy to follow Great job Thanks
@dynojoemods2764
2 жыл бұрын
Thank you for watching.
@jtigertic
2 жыл бұрын
Very good videos you've been putting out, I also agree no need to speed things up.
@dynojoemods2764
2 жыл бұрын
Thank you. Just want to know what and how people like seeing this content. I can always expand on certain topics if that is what is wanted.
@Ancient_Iron
2 жыл бұрын
Very nice and informative video!😊👌🏻 Greetings from Finland.🇫🇮🌲🌲🌲
@dynojoemods2764
2 жыл бұрын
Thank you.
@em4703
2 жыл бұрын
Great video. Also, regarding Dominator. Not a fan. If you cut in even slightly humid conditions, its inevitable to get crank rust after awhile since this thing is one of the few oils with literally ZERO rust inhibitors. Every time I opened a saw that used this for over a year or so had rusted crank, and not just spots here and there, the entire thing was brown. Other builders confirm similar things on arboristsite.
@dynojoemods2764
2 жыл бұрын
Thank you I will have to keep an eye on that. I've used it the last 3 years in Michigan we get pretty humid. Have not seen any rust. But I will keep a look out for it. Maybe they changed the formula, or something to do with ethanol in the fuel.
@BRKS-fj2jt
2 жыл бұрын
Great job very precise 👍
@dynojoemods2764
2 жыл бұрын
Thank you
@BRKS-fj2jt
2 жыл бұрын
@@dynojoemods2764 your welcome mate don't see any dyno action in Australia 👍
@ahineman123
2 жыл бұрын
Loving the channel! Another cool video
@dynojoemods2764
2 жыл бұрын
Thank you
@ambermosier3175
2 жыл бұрын
Lovin' this!!!
@williamnicholson1853
2 жыл бұрын
Great video!
@dynojoemods2764
2 жыл бұрын
Thank you
@JoshNoss
Жыл бұрын
Wow the stock numbers on the 881 (120cc I believe) are nearly the same HP wise and identical torque wise to the 92cc 592xp stock as far as the peak numbers go. The 592 is pretty hot from the factory though so I doubt you can gain much from porting one of them
@mitchell5828
2 жыл бұрын
Excellent video I would be interested hearing the process of choosing what size and degree timing of the ports that was made and why. Thanks
@dynojoemods2764
2 жыл бұрын
I will try and incorporate that sometime.
@joehackett9471
2 жыл бұрын
Great video! Keep em comin!
@dynojoemods2764
2 жыл бұрын
Thank you
@nwrunner0716
2 жыл бұрын
Well done
@dynojoemods2764
2 жыл бұрын
Thank you
@FULLFACEVLOGS
2 жыл бұрын
this is the channel I have been looking for! any chance you could do a bit of a run down video on the dyno setup?
@dynojoemods2764
2 жыл бұрын
kzitem.info/news/bejne/22mfnH5mrV-Sq20 Here is a quick one. I will have to make a more detailed one of the current setup
@kevinj6954
2 жыл бұрын
loved the vid man!!!!
@dynojoemods2764
2 жыл бұрын
Thank you
@matthesgotze6883
2 жыл бұрын
pls send this beast to Buckin
@dynojoemods2764
2 жыл бұрын
These are customer saws. I don't own them. Would be fun to dyno some of the saws buckin has
@kurthollyday4214
Жыл бұрын
What do you think the difference is in longevity with the porting you are doing? Excellent work and any of us Motorhead dorks watching this want as much explanation as possible. What does something like that cost?
@KimballCody
2 жыл бұрын
Nice video.
@dynojoemods2764
2 жыл бұрын
Thank you
@jimssawsnstuff8903
2 жыл бұрын
Good video. Seems about right to me.
@dynojoemods2764
2 жыл бұрын
Thank you
@lungbuster6953
2 жыл бұрын
Excellent video!!!! Can I mail a saw to you to have this work done?
@imaginedauthority9455
2 жыл бұрын
Is there a kit available... 🤞 all the way in Australia would love one of those builds
@dynojoemods2764
2 жыл бұрын
No kits, would have to ship the entire saw.
@dallasjames97
2 жыл бұрын
LOVE! what your doing! thank you so much how about ported AND piped individually done then together then maybe wiesco piston by itself then ported then piped THANK YOU THANKYOU this is B.A!
@SUROBLEDEKchannel
2 жыл бұрын
come and listen friends
@dynojoemods2764
2 жыл бұрын
Thank you, appreciate your support.
@mathews0618
2 жыл бұрын
Did you remove the carb limiters?
@dynojoemods2764
2 жыл бұрын
I do believe I trimmed the limiters.
@webster710
Жыл бұрын
Thats fucking brutal Bro🤟🤟🤟🤟
@blueglide1
Жыл бұрын
Where’s your shop at?I’d send you all three of my saws to go through,lol
@dynojoemods2764
Жыл бұрын
Michigan
@reillystsb
2 жыл бұрын
I would be curious to see on a brand new saw Dino before it's broken in and Dino after it's broken in
@dynojoemods2764
2 жыл бұрын
Most have been within 3-5%
@hisWACness
2 жыл бұрын
Being you just put these together, I'm assuming both saws will wake up a little once those rings seat and they start getting broken in? Or are the rings already seated from running them stock, and being that you just modified existing cylinder head there is no seat time? Sorry I don't know much about the stuff.
@dynojoemods2764
2 жыл бұрын
I would expect another 2-5% once fully broken in. Everything still needs time to seat. Normally 8-12 tanks of use.
@tickcreekranch
2 жыл бұрын
I have a new ms 881. Haven’t made a cut yet. It will be used for slabbing and bucking. I’d love to have this done to my saw. Already ordered a bark box. What does this cost to port and dyno? Thanks and great video
@dynojoemods2764
2 жыл бұрын
Price is at 350+ shipping. Will be mid summer before I am taking any new work.
@travisgilbert8416
2 жыл бұрын
@@dynojoemods2764 Is there a waiting list or will you just announce that you're taking more port work on your channel? Love the content, your calm demeanor (no drama), and down-to-earth explanations....very well done!!
@dynojoemods2764
2 жыл бұрын
@@travisgilbert8416 Thank you. Just have to check the porting service appointment on my website. Www.worksaws.com see if any dates are open. Should be some closer to July.
@travisgilbert8416
2 жыл бұрын
@@dynojoemods2764 Excellent!!
@AATreeService
2 жыл бұрын
This is my favorite video so far! Don’t speed it up!!
@dynojoemods2764
2 жыл бұрын
Thank you.
@bryanmarks4070
2 жыл бұрын
Where did you get that 1/8 split mandrel for sanding?
@dynojoemods2764
2 жыл бұрын
EBay. It is just a generic mandrel. They have a couple different sizes and shapes.
@luxbeci2
Жыл бұрын
I have Stihl 880 Chainshaw. What is different Stihl 881?
@lungbuster6953
2 жыл бұрын
Can I mail a saw to you and have this work done?
@dynojoemods2764
2 жыл бұрын
Yes, that is normally what I do. I am currently booked until the end of April. So I am not taking any new work at this time.
@reillystsb
2 жыл бұрын
If I mail you a saw will you Dino it for me... Holy shit that's a drill bit
@dynojoemods2764
2 жыл бұрын
Yes. Long as it starts runs and idles well. And can use 3/8 chain Www.worksaws.com has more info on the dyno. Just send me an email when you are ready.
@hinz1
2 жыл бұрын
Does it also increase fuel consumption or does the saw just get more efficient by porting it? Great explanations, very interesting, btw!
@dynojoemods2764
2 жыл бұрын
Thank you A little bit of both. Power takes fuel to make. Stock does a good job retaining the excess inside. Once modified efficiency goes up to make power from the same displacement. But I'm not sure how much fuel is also wasted doing so. Once i hear back from the owners I will know for sure some models are harder on fuel after mods, but also make more power and production too. I would say 90% use more fuel than stock. Most love the extra power, before ever mentioning the amount of fuel used. Sorry hope that makes some sense
@mihaelabitanu9004
2 жыл бұрын
Super bravissimo
@timtorkelson7201
2 жыл бұрын
Bark box saw slightly ahead of Eagan straight shot? At least that's what he daid?
@timtorkelson7201
2 жыл бұрын
Said
@dynojoemods2764
2 жыл бұрын
They are very close. That powerhead was slightly ahead to begin with.
@MrRmh3481
2 жыл бұрын
How about a run against that big Echo?
@dynojoemods2764
2 жыл бұрын
The big Echo isnt quite in the same league as these modern work saws. Need to get pretty wild with the big Echo for it to run above the 10hp level. But I bet it can run all day for the next 20 years...
@benbradshawjr2856
Жыл бұрын
Why would you want more power than that??
@dunkelheit843
2 жыл бұрын
Why don't the saw come like this from the factory? Any major drawback? 25% is pretty huge.
@dynojoemods2764
2 жыл бұрын
Factory has to meet emissions, and a bunch of other little hoops. The first 20-40% is generally pretty safe for saw life span. 50%+ is getting pretty radical for something you plan to work every day.
@dunkelheit843
2 жыл бұрын
@@dynojoemods2764 I see, thanks for explaining.
@MrWalkerds
2 жыл бұрын
how much $ for you to do this to my 880?
@dynojoemods2764
2 жыл бұрын
I am not currently taking new port work. Maybe spring/summer.
@brandonsmith3447
Жыл бұрын
Please speed up if you aren’t describing or talking about info pertaining to the build. Thank you.
@kevinz763
2 жыл бұрын
Absolutely please don't speed things up...ppl can't learn anything without seeing and hearing just found your channel a couple wks ago
@dynojoemods2764
2 жыл бұрын
Thank you. Just started this KZitem journey a few weeks ago. Trying to see what people like better if it is very long how-to, or shorter more specific videos. Any segment in this can be expanded on. I just need to hear what you, and the other viewers would like to see.
@kevinz763
2 жыл бұрын
@@dynojoemods2764 most ppl will probably say keep videos in the 20-25min range....I just went to your website after I watched this and I see your out of the digital degree wheel that your making when do you expect more back in stock? I'd like to order 1
@dynojoemods2764
2 жыл бұрын
@@kevinz763 I expect late next week, or the following,waiting for parts to arrive. I will add a couple more and adjust the discription. (Ships in 1-3 weeks)
@michaels3288
2 жыл бұрын
People either understand how two strokes work or they don't.
@dynojoemods2764
2 жыл бұрын
They can be tricky at times. Welcome! Thank you for coming over
@brettblack7049
2 жыл бұрын
Thanks for the less Joe. Oh, I always wope my ring 🤣
@dynojoemods2764
2 жыл бұрын
Good practice :)
@surosostiawan1676
2 жыл бұрын
Mintk 1 dong senso ya
@deanstavalone6960
2 жыл бұрын
Awesome content, but as far as the different mufflers - your comparison is worthless. You've compared two different mufflers on two different saws that are "similar". Now swap the mufflers to the opposing saws and run it again...3 times each way...then compare. You could take two new saws out of their boxes and they'll have a 3% difference if you compare them with ONE run.
@dynojoemods2764
2 жыл бұрын
I had zero intentions to compare mufflers. Those happened to be what the customers wanted. Hard telling what actually made the small difference. On stock saws those covers are so close to each other. Whichever a person prefers is the better cover. Thank you for watching.
@davidcarper5411
Жыл бұрын
More power equals much less engine life
@dynojoemods2764
Жыл бұрын
How much less?
@alejandropalominoarohuillc5165
2 жыл бұрын
Cuánto me cuesta la motosierra cuánto me cuesta motosierra 881
@sempi8159
2 жыл бұрын
These exhausts are way to loud for normal use. No hearing protection can bring you back to safe levels…. Not sure if more power is worth being deaf :)
Пікірлер: 171