Vanover's flight was hands down one of the best freestyle flights I've seen in a while. Nice smooth flow, not too jerky and not too dancy, just perfect. Well done, Alex!
@wyvern4588
3 жыл бұрын
I do like that style too, I carve hard when I'm just racing around, and then just float around freestyle- makes you feel like gravity is turned off.
@steady747
4 жыл бұрын
Vanover has a great flow, man he's good
@flo-ridafpv5713
4 жыл бұрын
Yea watch his stick cam rip at a school from few months back, 1 of the best runs I've ever seen
@bigred8022
4 жыл бұрын
Vanover needs to rip that lil 3" Octo agen that was off it head I couldn't keep up with it
@jack00scarecrow
4 жыл бұрын
loved how the quad ran down the tree trunk and kept on flying
@slickfast
3 жыл бұрын
Seriously, that thing was RAKED down an entire tree trunk and it's still flying?! Thing is tough
@professorb3744
2 жыл бұрын
The 50-50 dark-slide down the tree was amazing ! Cool trick
@Quadcopterguide
4 жыл бұрын
I must say. Every time there’s onboard footage I am jealous of that yard. So nice. That’s awesome.
@supergiantbubbles
4 жыл бұрын
I'm so glad you didn't have music during the flying. So refreshing. Awesome little drone.
@robj_fpv1959
4 жыл бұрын
Can’t begin how to tell you , how you have helped me along the way, thank you
@MUNKYFPV
4 жыл бұрын
Nice little micro. Best thing I ever tried for getting quads out of really tall trees is one of those ball chuckers I use to throw a ball for my dog with, attached a strong thin line to a weighted rubber ball and I can accurately throw the line really high and get it right over the quad. They only cost about $5 but you need to make the ball heavy enough to pull the line up (I use a builders string line, strong but light) then I can attach a thicker rope and pull it through if it’s a particularly thick branch that needs a good shaking 😂
@AKtoTok
4 жыл бұрын
That is a really good idea
@wackywezfpv9335
4 жыл бұрын
I have one, very nice, and I squeezed an R9M inside, my buddies are using the crossfire with 850mA batts. However, I have gone through four motors to date, two within 10 flights, and bent the tip of an arm crashing into the dirt. The replacement motors cables are too short to install at the front end, you have to splice cables which is not fun, the replacement frame was not cheap, but came quickly complete with all new TPU parts. The beetle is by miles my favorite 2.5" flyer, shes always packed on a fly day, I would recommend it to anyone, my only complaint really is why the motors failed and short cables, all of which can be remedied.
@notkira_x
4 жыл бұрын
14:36 "All that money just hitting the ground" - Every FPV Pilot when crash lol
@NextLevelCode
4 жыл бұрын
LesKira yeah. But DRL drone is next level expensive.
@solvend
4 жыл бұрын
Seems like it would be a perfect discrete park flyer. Less noisy, less threatening looking. Seems very solid, thanks for the review JB.
@Chio_OB
4 жыл бұрын
That is some freaking amazing flying!
@friendlynomad9840
4 жыл бұрын
Thank you for calling them MONOpole antennas! There are so many great and knowledgeable FPV channels that always call them dipoles. JB really is the most smartest one.
@TweakRacer
4 жыл бұрын
FriendlyNomad and JB are both wrong. The Transtec and whoop VTX antennas are sleeved dipoles. Monopoles, like regular 2.4GHz radio antennas, do not have that thicker sleeved section.
@friendlynomad9840
4 жыл бұрын
@@TweakRacer Monopoles are defined as having a single element, regardless of counterpoise or ground plane. The counterpoise gives the antenna performance and function like a dipole, but it still only has a single element. Take a look at the "dipole antenna" page on Wikipedia. Either way, we're just arguing semantics.
@ianozborne1555
4 жыл бұрын
I own the dc3 and the transtec, definitely prefer the dc3, but the beetle is cool too
@garrcassx2
2 жыл бұрын
My favorite parts of your videos is the non pulled punches 🤣
@crispy1688
4 жыл бұрын
i always bring some paracord or fishing line with weights on it. Saved me many many times!
@jonahchaney4691
2 жыл бұрын
"oh shut up hater"...Bardwell giggling like a schoolgirl in the background. LMFAO!!!!
@sebofpv3219
2 жыл бұрын
This setup is so great !!! I have it and I'm discovering your review now lol I love this beetle, so under valued
@jackmaddox4960
4 жыл бұрын
I suspect there will be a V2 of the Caddx Vista before too long, that will have onboard DVR recording, and maybe an even smaller size. Also I suspect before too long there will be other good alternatives in digital video RX's and TX's, and before ya know it, we'll have digital video Whoops! We're lucky, it's the FPV Golden Age; technology is making leaps and bounds, and Big Brother hasn't yet crushed it under his heel and ground our beloved quads into dust...
@jtcustomknives
3 жыл бұрын
Don’t know what Chrystal ball you where looking into but a year latter and we are about where we where last year.
@matthebert007
3 жыл бұрын
You've posted so many videos of your house they knew all the lines already. Josh was probably like... "Alex, you want some warm up packs?" Alex- "Hell no man" ...But he can probably cold fly ANYTHING ANYWHERE
@markuskoarmani1364
4 жыл бұрын
Ok . JB i build it because of this video with xing 1105 motor and I added 3" props on the back with 2.5 forward. Yes they fit perfectly and the quad flies much better, smooth Nd faster punch outs. for thos who got 2.5 beetle try it!
@GroundControlRC
4 жыл бұрын
Looks like a good solution if your going full DJI or adding a separate receiver. See you in the Air!
@Jacey2001
4 жыл бұрын
Wow, I've been away from the hobby fir a bit, I come back to see all the dji hd stuff... I wish I could just use my hd3 goggles with the dji quad
@keithmccormick1272
4 жыл бұрын
The Iflight dc3 . Mine had a gyro problem but RDQs and Iflight fixed that with a new board . IMHO the 2 rear arms come back at a 45 degree angle and are very flexible and look like a break point .Mine have not broken so far . PS I love my Transtec Beetle
@BobZombie5k
4 жыл бұрын
I recently found your channel and subbed Thanks for the endless info/education pretty awesome man Thank you 🦧
@TheMoonwatchers
4 жыл бұрын
does better with the emax nano antennas. mine is now for sale but I did order the Laser for a friend that I am building for. btw the ducts will bust in snap unless you put welder pro rubber cement (or other) reinforcing the struts at the hub., same trick the whoop racers do. Was disappointed the flux capacity thing was mis-wired in parallel.
@hofa
4 жыл бұрын
What kind of salty haters downvote this video within an hour after release? Do they have a script running: If (JB) { downvote }? Either way: crazy flying by Vanover! That style is like the lovechild of Drib's flow and Steele's technical skills. Really impressive!
@JoshuaBardwell
4 жыл бұрын
Some people hate DJI.
@hofa
4 жыл бұрын
@@JoshuaBardwell I'm 32 years old and I keep forgetting that this is the glorious semi-anonymous internet... They should put 'Remote IDs' on internet connections, except if it's slower than 1Mbps 😁
@Stankycreekbmx
4 жыл бұрын
As many times as I've flown at your house, wink wink (liftoff), I've never gotten a quad stuck in the trees!! Just sayin!!
@JulzGatBeats
4 жыл бұрын
SwingFPV 😂😂 I fly at his house all the time too!
@SollessGarage
4 жыл бұрын
@@JulzGatBeats yo SAME!
@sovietraccoon6007
2 жыл бұрын
I mean lift off let's you just blow through branches at times
@KCQuadTronX
Жыл бұрын
i cant wait to come and get to fly with you joshua ....it would be so awesome .....
@hateeternalmaver
4 жыл бұрын
Oh wow, how did he... what? 02:30 how is that even possible? At first I thought he was throwing himself *through* the fence but even how he slung it over there is just like... WHAT?!? ;D
@ThiagoBenazziMaia
4 жыл бұрын
This world is not real
@DavidReynolds-kr6yh
4 жыл бұрын
That fall from out of the trees, I thought for sure it would have been shagged, but as I could see from when you brought it inside, it sure does take a hiding lol. If I actually owned dji goggles, I’d buy this one for sure. Maybe in a few weeks I might own a pair, because I like the looks of them.
4 жыл бұрын
Now i just want to see vanover fly random stuff to show how things should fly.
@FPVtips
4 жыл бұрын
Pretty awesome IMO! I can't even imagine when AirUnit v2 comes out and is even lighter :) Great times for our hobby, truly!
@peterzingler6221
4 жыл бұрын
It's 50gramm at the moment where as an analogue can be 2 Gramm. Lot of air down there
@Perceivedshift
4 жыл бұрын
@@peterzingler6221 2g analog? You mean 20g? Most analog setups hit the 30g range minimum
@dev.lockridge
4 жыл бұрын
Perceivedshift can be far far less than 30g (especially in whoops)
@TweakRacer
4 жыл бұрын
Peter Zingler Cool story bro. 2g for a 1080P camera/DVR/VTX/CP antenna(s) like on a 50g Air Unit? Sure, noob.
@dev.lockridge
4 жыл бұрын
TweakRacer hd? that’s heavier. Analog vtxs are built into whoops. which can be and usually are under (or around) 20 grams. @Peter Zingler said analog can be 2 “gramm.” While I don’t know about that, they’re certainly less than 30.
@urodinofpv3313
4 жыл бұрын
Glad Nubb saved the day by getting the quads out of the tree. Very high tech, effective, low cost method 💪🏼
@keithplayspc
3 жыл бұрын
The deeper and deeper I get into this hobby the more and more I'm finding just how many pilots are in the area, lol....I wonder why o.O
@BobCaseyAerial
4 жыл бұрын
Impressive flying Alex Vanover
@AKtoTok
4 жыл бұрын
These builds are so sick.. just ordered an hglrc sector 150, upgraded to caddx tarsier (cuz yes im still an analog dinosaur)..
@powertuber4.068
4 жыл бұрын
How do you guys fly like this, you would have to anticipate unfamiliar objects milliseconds beforehand and then have time to react?
@fdsfpvquadventures1141
4 жыл бұрын
They have superpowers.
@momo.ru-kun
4 жыл бұрын
I learned today that when you get a quad stuck on a tree, it would be a bad idea to fling it out with another quad
@Sty1a
4 жыл бұрын
for that purpose i have my "tree bitch", cheapest quad out of leftovers, lets assume it flys ok xD i tie a paracord to it and try to hit the same branch with it where the stranded quad is.. then you start pulling :D either you get both quads back, or you get tree bitch back for another try :D
@NextLevelCode
4 жыл бұрын
I will tell you the arms are definitely seem to be a weakness. I crashed mine on grass when my air unit video froze. The arm cracked. I ended up superglue the arm because it’s taking a long time to get the replacement frame in. Surprisingly I’ve had much worse faster crashes sense the glue and nothing else has broken. Very strange indeed. I read that the air unit can freeze up like that a lot when your don’t have a capacitor on the quad so I’m going to install one. Btw you can fit an XM+ under the ESC if you just add a few small washers to lift the ESC up a tiny bit. I’m actually thinking about replacing the FC and ESC with the 20A betafpv AIO to save more weight.
@ZenMountain
4 жыл бұрын
Vanover is a really good pilot.
@ugpfpv361
4 жыл бұрын
Yeah I'm starting to think that also 🤣
@witgangyounotube287
4 жыл бұрын
i think sub 250 g and good video is also possible with Hawkeye Firefly Split 4K or Caddx Tarsier 4K dual lens cameras they are about the same weight as the DJI air unit or even less. although they don't have robust case's protecting them and adding one to those might get over that weight. also the recording will have to be done on the drone itself which has it's own advantages/disadvantages.
@nocknock4832
3 жыл бұрын
at 3:00 omg that was so nice
@checkeredflagfilms
4 жыл бұрын
8:48 "THE ARMS" Yup, had what I thought was a rather 'mild' crash today, on a grass covered open-field and viola! Arm snapped at exactly the place you pointed out! Right at that curvature/elbow location. Kind of discouraging, since it was only the third time I'd flown the Beetle and was starting to really like the way it flies. :( :(
@tl-mr3cy
4 жыл бұрын
sorry to hear that bro, did you use the prop guard during your flight?
@checkeredflagfilms
4 жыл бұрын
@@tl-mr3cy No prop guards. replaced the arm then one of the motors went bad and had to replace that...but all is well now.
@DamianE-2007
4 жыл бұрын
JB, how do you NOT have a throw bag and line at your house with those huge trees?!?! To add to your comments, my DC3 with full air unit is 173g dry. (differences: 3", F7, 3-6s, extra UART on the latest Succex Mini) The other similar frame to look at is the FlexRC Colugo. FlexRC has a ton of 3D pieces they provide the .stl on their website As always, thank you for your awesome video. I learned something today
@Northstar-Media
4 жыл бұрын
Drew's style seems more technical coasting along the side & up & over instead of punching & doing flip flops . But I don't fly FPV yet it's hard to find someone to guide & help you & I go to local hobby store & they dont have much interest in FPV just trains n planes.
@王浩懿-i5d
4 жыл бұрын
Note that with 3s 850mah, it feels rlly bad when doing free-fall or sharp turning. I think the only thing for it to brag about is the durability = =. My seller told me it's possible to burn your motor with 4s battery. N also, there's no a built-in blackbox and the ESC doesn't support bidirectional dshot, which makes it much unfriendly to those are new to fpv. Due to the pandemic I had to buy a drone allowing me to fly among people (no open space at home) with least risk so I bought it, but for beginners, build up a drone by yourself. Just for reference
@Dennis-ve2vd
4 жыл бұрын
regarding the escs: you can flash jesc or jazz maverick to get bidirectional dshot.
@Restless2010
3 жыл бұрын
I run 4s 850 packs no problems.
@bkramber
4 жыл бұрын
I couldn't stop thinking about how great this quadr will fly with Caddx Vista))
@MrCineris
4 жыл бұрын
Damn you JB... Was hoping to buy one before you made it sell out
@manc01
4 жыл бұрын
Please try to do a review of the iFlight DC3. It looks great!
@cypvh74
3 жыл бұрын
GPERC now has a version of the ROCKET with a DJI Air Unit, would you still choose the transtec beetle?
@TheMetalSandman
4 жыл бұрын
Hey, is it possible that you could put their stick commands on the screen as you did on one of your "how to trick" videos? Some of those moves were sick! I'd like to learn those!
@JoshuaBardwell
4 жыл бұрын
Unfortunately I don't have that data recorded.
@DawnHub666
4 жыл бұрын
it flies really well
@rcjarvis
Жыл бұрын
Can't find these beetle anywhere... did they stop production ?
@DoctorrMetal
4 жыл бұрын
HAHAHA I ordered this and you know what buy and fly PNP is cheaper than ordering separate! Can't wait! (noob pilot)
@icecorebaby
4 жыл бұрын
I just bought my dji goggles and dji controller. Going to make this my first dji air unit drone! Just curious, wouldn’t 1108 motors been a better choice for 4s?
@licensetodrive9930
4 жыл бұрын
Even Drew's "feeling it out" run looks better than my "top of the crop" footage! :-\
@Burn377
4 жыл бұрын
I feel ya 🤣
@TheDroneNerd
4 жыл бұрын
Warning to potential buyers, Two motors burned out after one flight. I ordered the motors from Transtec over two months ago and still haven’t got them... Just not worth the hassle imo.. some companies just suck and Transtec excels at that.
@joef595
4 жыл бұрын
Stick on Emax 1106 motors
@ianozborne1555
4 жыл бұрын
I had a motor smoke out after a few flights as well:/
@jurikristjouw
4 жыл бұрын
Nice little DJI drone... Could you also show us how to build one ourselves with our own parts?
@bosslitfpv1906
4 жыл бұрын
I decided to make the leap to digital I just made the purchase through your link hope you get the kick back thanks
@sonnivega6739
Жыл бұрын
Still looking for this
@Georgewrigley
4 жыл бұрын
Love it. Great video buddy 👍😊✈️
@Life_a_bike
3 жыл бұрын
Is a antenna upgrade recommanded? I find it not very good, lots of wifi signals around our house dow...
@tomhawk3424
4 жыл бұрын
Does it come with a Beeper installed? Can't figure that out on the TransTEC website.
@Ivan.Werdaner
4 жыл бұрын
no
@Restless2010
3 жыл бұрын
You can set the motors up to beep
@BACONFPV
4 жыл бұрын
Lol.. your shirt though 😂😂😂
@waynewilkinson9469
4 жыл бұрын
Mr. Bardwell, Could you please do a video of upgrading this with RPM Filtering and the OSD settings that work. I bought this because of you and Zoey FPV. Just getting into the hobby and decided to go DJI But having some issues. I am in New York and now have time off.
@JoshuaBardwell
4 жыл бұрын
I am hearing from others that the FC does not work with RPM filtering enabled.
@waynewilkinson9469
4 жыл бұрын
@@JoshuaBardwell Thank you, I didn't expect you to respond. so I guess I upgraded the ESC for no reason disabled LED and for no reason. Can you help me get this thing flying?
@camomaster6316
4 жыл бұрын
Last question, I promise!, what one do you think would hold up better in a crash? Vs the 95x again
@kevinjulievan
4 жыл бұрын
Impressive ! Seems like stock tune is great !!
@PokerShark101
4 жыл бұрын
I'm amazed....
@TheMetalSandman
4 жыл бұрын
Sup Joshua, is it possible to configure the ESC on this drone using BlHeliSuite? Mine doesn't work with it, so I can't flash blheli 32.7 and therefore no Bidirectional Dshot :/ Can't reverse motor direction, can't configure ESC max/min throttle or anything! ugh!
@witblitsfpv1265
4 жыл бұрын
Good to see the pro pilots also get stuck in trees... Makes us feel a little better. 😂
@papagameing1057
4 жыл бұрын
did anyone else hear the dremel sounds it was making at half throttle???
@FilipRadelic
4 жыл бұрын
Air Unit records some weird sounds on my 5" which is perfectly smooth, could be just a bad mic ¯\_(ツ)_/¯
@Sty1a
4 жыл бұрын
it's actually the motors hitting the microphone membrane's resonant frequency xD
@metaldirtnskin
4 жыл бұрын
The more other HD cam/mic combos I see and hear (Turtle, Runcam 5, DJI, etc.) the more impressed I am at just how good GoPro mics are.
@domm3840
9 ай бұрын
anyone know if there is something unique about getting the LED's to work on this?, just got one used but LEDs wont power up, tried resetting in betaflight but no luck.
@ceejey
3 жыл бұрын
Does this drone have different modes like Stab, Horizon and Acro or can it fly only in the Acro mode? Thank you
@Jamesn-js1zp
4 жыл бұрын
Hi Joshua, hope you're finally over the flu and feeling much better now. Hope you can help regarding connecting the crossfire to the F411-HD FC, there's only RX, 5V & Gnd pads, isn't a TX pad also required?
@JoshuaBardwell
4 жыл бұрын
You can use CRSF with RX only but you won't get telemetry.
@Jamesn-js1zp
4 жыл бұрын
@@JoshuaBardwell Cheers, thank you. I only just noticed that the newer F411-HD FC board now have an RX & T1 pads, the cable connector also has T2 & R2 pins
@mrmOoOon90
4 жыл бұрын
It Flys pretty awesome. But the motors sound horrible.... What is causing this?
@andrehope8994
3 жыл бұрын
Is this the best quad under 250g with dji air unit? What other options is possible, when I also want best possible range? E.g fly inside buildings?
@E-sk8Fr
4 жыл бұрын
great video. is this frame available anywhere in the world at this moment
@n8zfpv
4 жыл бұрын
I use baseballs. Or a softball when I'm desperate. Especially useful softball field nets.
@n8zfpv
4 жыл бұрын
A softball definitely has more weight for nets ;) ;) kzitem.info/news/bejne/pKVrummOqXZieXY
@fpvnycdream_4197
4 жыл бұрын
Would we really be safe from remote id even if under 250g .. I hear it won’t matter the weight and all drones will require registration and id if it ever passes as is. Correct me if I’m wrong. Thank you. Cool flying !! 👍🏼🔥
@JoshuaBardwell
4 жыл бұрын
Current wording exempts aircraft under 250g. That could always change.
@nullx8
2 жыл бұрын
the Diatone P35 with Air Unit is 246g ;)
@nullx8
2 жыл бұрын
ohj wait, never mind that's dry (without battery)
@Pislikherif87
2 жыл бұрын
Sir. How can ı use it radiomaster zorro 4 in 1? Which receiver should ı buy?
@fluttershy77x
4 жыл бұрын
Hey Joshua, is this a better choice than the Machineworks Massive Droner HD? Not for racing, but for fun.
@scooterfpv8864
4 жыл бұрын
Pretty Cool Man! It's interesting that the flight dynamics "look" like a larger multirotor. Vid looks and sounds WAY better n my current DVR. I'd give it a whirl. And you know what would add an extra layer to this? It would be if DJI would make a Module to fit in my current goggles and still have the selection interface with audio feedback. "Wink Wink Nudge Nudge".
@gammagonad1657
4 жыл бұрын
Scooter FPV I bought one almost a month ago. I looked on race day quads almost daily. It popped up on Day, I didn’t think twice. The next day I looked and it was sold out. I know Joshua definitely helped his popularity, but it’s always been in short supply/high demand. It is very smooth flying out of the box.
@scooterfpv8864
4 жыл бұрын
@@gammagonad1657 Nice! Thanks man (^^)b
@franklyfpv1909
4 жыл бұрын
Maybe better performance on 3” inch? I saw that the seller have the option🤔
@oblivionblade2623
4 жыл бұрын
I love seeing that there is hope for the hobby if s*** hits the props. (Also Nubb with the mad rope skills!!!)
@flo-ridafpv5713
4 жыл бұрын
I wish 250g thing is only exempt now, not as it's written going fwd
@nathankiser3266
4 жыл бұрын
Look like a squirrel with a camera crawling down a tree lol 5:30
@CarbonIcarusFPV
4 жыл бұрын
You should try the iFlight DC3 3" DJI HD Sub-250g quad with 3S 850 and 4S 650-850. Really.. you should.
@CarbonIcarusFPV
4 жыл бұрын
Haha, sorry, posted this as I was watching your video.. I see you tried it. 😄
@CarbonIcarusFPV
4 жыл бұрын
Yes, sub-250g with the Tattu 4S 650mah, and right on the 250-255g mark with the 3S 850mah.
@420timothyivory
4 жыл бұрын
Broke a beetle arm and I moved onto the DC3. I ordered spare frame bottom to be safe
@CarbonIcarusFPV
4 жыл бұрын
@@420timothyivory good move, I've replaced the bottom plate 4 times, but I love it so much I can't stop replacing them and flying. It's my fault, I really push myself. I could fly more reserved and not break them.
@gammagonad1657
4 жыл бұрын
Carbon Icarus FPV same here. I automatically ordered a couple spare bottom plates. Super thin carbon. That’s how it hits the weight class though. About to swap out the air unit for a Vista I just got in the mail. Air unit is going in my Squirt build.
@paulbehrens5842
4 жыл бұрын
Does Alex ever make himself sick whilst flying? I sure as hell am!
@marcelozanotti1595
3 жыл бұрын
could friends help me? what is better and safer to fly with Taranis xlite radio with Crossfire 1w module or with the digital DJI radio. which radio system would be safer and better?
@camomaster6316
4 жыл бұрын
@joshuabardwell do you recommend this over the beta 95x? Sorry if they are 2 different categories I'm still new. Just want a smaller quad that's easy to set up.
@JoshuaBardwell
4 жыл бұрын
They are close to the same price but I think the Beetle is better. It's heavier, and you would think that makes it fly worse, but without prop guards, I think it flies better, and the weight kind of makes it a little more freestyle-friendly. On top of that, it has the full Air Unit so you get on board recording.
@camomaster6316
4 жыл бұрын
@@JoshuaBardwell Thanks, I think I will cancel my pre-order for the beta and go with this. . Appreciate all you do!!
@gammagonad1657
4 жыл бұрын
Yeah, it’s pretty darn cheap, for what you get. Ditch the prop guards though. Makes it fly worse, plus they break the first time you crash. Other than that, super fun little quad.
@Illuzionizhere
4 жыл бұрын
How does he do that?? Can you put his sticks on the screen by chance?!
@possible1337
2 жыл бұрын
Do you know the Normal IR values of a 3S 650mah ? Mine are around 20-35
@Wildicon19
4 жыл бұрын
Is that going to be the trend that all qwads go sub 250? Then I am ahead of the game. The sound of the buzz has a deeper tone to it, are the blades pitched less? Great review, it sure is a tough little monster!
@gammagonad1657
4 жыл бұрын
Crimson FPV It runs Gemfan 2540s
@protonus
4 жыл бұрын
Joshua - can you post your PIDS or CLI dump for this for this? Most of us have not had good flights on 4S and I'm thinking your review unit might have a different tune on it? Without any way to do blackbox on this I haven't felt like tuning it.
@protonus
4 жыл бұрын
Edit, I got the dump! Here it is: pastebin.com/daTx5vye?fbclid=IwAR3HJ8GWnj_FEC3EyZAtxQwGYNKbALnv29uEbG27WTMgeh8LKoRiZZogi3g
@AHTOH4uk1979
4 жыл бұрын
Cap Vanover the BEST 👍
@Bannisterpost
4 жыл бұрын
Have you successfully loaded Dshot on this quad? A few of us are having 100% motor errors when enabling it.
@paulsantarsiero2650
4 жыл бұрын
Joshua maybe u can make us a video on getting it working?
@GTARC_au
4 жыл бұрын
Morning JB. Watching now.
@possible1337
2 жыл бұрын
Does it have more prop wash with the gaurds on it ?
Пікірлер: 369