Damn bro, that’s a lot of steps, time and energy. You’d have to charge a fortune if you were trying to turn a profit. Excellent job though. I’ve seen the whole process done in a fraction of the time, without your litany of products, yet perhaps your method is basically bulletproof.
@moriahfowler1616
3 жыл бұрын
I'm confused, you didn't show the same tumbler as the one you were working on
@Dragonomine
3 жыл бұрын
So... you put the WHITE sublimation tumbler in the oven and then the finished product is showing the design on SILVER? Must be magic.
@kumabear3268
2 жыл бұрын
Just what I was looking for thanks
@nukki1
Жыл бұрын
Wondering if you did the same process on that beer mug?
@maryannfranqui6951
3 жыл бұрын
I have the same heat gun. If you hold down the on/off button it shuts off!
@SSUPhotoDesigns
3 жыл бұрын
Yes. It’s pretty cool. Some times I do that but other times I cool it down first
@karenfalbo5436
5 ай бұрын
Can I also do this in a mug press instead of an oven?
@christinatopics2031
3 жыл бұрын
I just got mine and was wondering if y’all had anymore videos.
@SSUPhotoDesigns
3 жыл бұрын
Yes we are waiting for the manufacture to release their new videos
@yanirarojas8648
3 жыл бұрын
I’m Having so much problems with my seams . I’m going to try the tape method .
@janettagagnon3245
8 ай бұрын
Question, once your Tumblr is dry from the sublimation spray, does it have to stand up right in the oven or can it lay on its side?
@sarahhearn3075
2 жыл бұрын
I have a lot of stainless steel tumblers. From my understanding, I can use the adhesion promoter, then the white spray and then another coat of the adhesion promoter? I know that each later would need to dry/cure but trying to figure out which specific products i would need
@mrs.mallon1696
3 жыл бұрын
Great video! Do you have one showing how to do a white or other color tumblers?
@ssuphotoandtotally-hitched7423
3 жыл бұрын
yes sorry ill be adding more soon
@mistyg9196
3 жыл бұрын
Have you tried the subliglaze without the adhesion promoter? I ordered the subliglaze in clear and white but wasn’t aware of the adhesion promoter
@ssuphotoandtotally-hitched7423
3 жыл бұрын
The Promoter helps with allowing the glaze to stick to your object. Without it the paint could chip alot easier
@diannabrigham3312
3 жыл бұрын
When you bake the tumbler can you lay it down in the oven or must it stand up?
@ssuphotoandtotally-hitched7423
3 жыл бұрын
I personally would stand it up. The paint is still wet if you lat it down you will see the grill area from the wet paint
@jenessakeesee9092
Жыл бұрын
What oven do you have
@kimberlygoodfellow4155
3 жыл бұрын
If I want the tumbler to be white. Can I just buy the subli glaze white base and the adhesion promoter?
@SSUPhotoDesigns
3 жыл бұрын
You would need the promoter, white base and the clear. The clear is what the sublimation inks adhere to.
@melissagrissom2900
3 жыл бұрын
Do you know about how many tumblers like the ones in this video the can of subliglaze can do?
@ssuphotoandtotally-hitched7423
3 жыл бұрын
Not really sure. Guess it depends on the coats you do.
@wileycovington4497
3 жыл бұрын
Hold up. Wasn't the tumbler painted white?
@carollehrer
2 жыл бұрын
So are you saying you can take a regular tumbler and turn it into a sublimation tumbler using those products?
@SSUPhotoDesigns
2 жыл бұрын
Yes. You can.
@MMBorde
3 жыл бұрын
if you have a small image do you have to coat the whole tumbler or just where the image will be? Can you use this on powder coated tumbers?
@SSUPhotoDesigns
3 жыл бұрын
Yes you can add the clear on powder coated tumblers
@Truecrimequeen68
3 жыл бұрын
Can you use on ceramic mugs?
@SSUPhotoDesigns
3 жыл бұрын
Yes
@abernal687
2 жыл бұрын
Is the spray fda approved? Safe for drinking like on a mug.
@SSUPhotoDesigns
2 жыл бұрын
It’s made in Europe. Not sure what they require but it’s the same as buying a mug already sublimated.
@aliciahoward1598
2 жыл бұрын
Is this the same stuff that can be used in a sprayer?
@SSUPhotoDesigns
2 жыл бұрын
you would have to buy the gallon for a sprayer
@sherrim6426
3 жыл бұрын
How to take the glaze off if I put too Much and it bubbled when it cured
@SSUPhotoDesigns
3 жыл бұрын
You can’t. You would have to sand it down and re apply.
@YonuelOrtiz
2 жыл бұрын
Hi. What printer do you use to make those big prints?
@SSUPhotoDesigns
2 жыл бұрын
We use the epson 7890
@stacybriggs5149
3 жыл бұрын
What size paper did you use for the white tumbler
@SSUPhotoDesigns
3 жыл бұрын
We have the template on our Facebook group under the files section.
@christinabutts32
3 жыл бұрын
Where do u get these from. No one will answer me plz....
@SSUPhotoDesigns
3 жыл бұрын
I apologize. I just saw this. We sell them on our site www.Ssuphotosubdesigns.com.
@kellyhewitt162
2 жыл бұрын
What size is the holder
@SSUPhotoDesigns
2 жыл бұрын
Dont know off hand, but it fits 20oz and 30oz tumblers
@ideasgalore.orginal
3 жыл бұрын
What oven are you using and where do you buy it?
@SSUPhotoDesigns
3 жыл бұрын
Best Choice Products 55L 1800W Extra Large bought it at Walmart online. but amazon had it too
@dianavalenzuela5267
3 жыл бұрын
Can you use glow paint on it then seal?
@ssuphotoandtotally-hitched7423
3 жыл бұрын
no. Glow paint cannot take the heat when Subbing. You would have to use a special glow Paint that is powder coated on.
Пікірлер: 52