You might have caused a gap in the enclosure when you put that brace in. It might flex more now and have a lower SCORE. Try cutting it just a little short and draw the enclosure tighter w/ screws. I bet things will change.
@JacobViral2
4 жыл бұрын
Good idea will try and see sometime thanks
@KdubTraX
Жыл бұрын
@@JacobViral2 Did it work?
@JacobViral2
Жыл бұрын
@@KdubTraX Yes it works :)
@bradnason5659
4 жыл бұрын
Loving this content man, all "behind the scenes" and "how to" videos that not too many other people make, but a LOT of people actually need. Keep it up man
@JacobViral2
4 жыл бұрын
Thanks glad to share
@2ghettoTim
4 жыл бұрын
Have vehicle running 4 full volts, should make a difference also. Love the content bro! Keep it up.
@dksculpture
3 жыл бұрын
The brace may have raised the natural frequency of the cabinet. That may give you cleaner, less peaky bass at the expense of slightly lower output. Listen to music and see which way sounds cleaner.
@jerryees
5 ай бұрын
Try adding polyfill!
@lowhertzhighspl
4 жыл бұрын
No need to apologize for teaching us bro because for every viewer who complains by saying 'you talk too much', there must be 10X that many viewers LEARNING.
@Everett-xe3eg
4 жыл бұрын
idk why youtube unsubbed me from your other channel but this ones been entertaining
@JacobViral2
4 жыл бұрын
Well welcome again!
@Everett-xe3eg
4 жыл бұрын
@@JacobViral2 🧐 had to resub twice now...
@jondoe-pe9ob
4 жыл бұрын
Try spraying a rubberized truck bed coating on the inside of us box I curious how it well affect it
@midbass.maestro
4 жыл бұрын
I tried it and didn't like it ur better off sanding it smooth and painting it with something smooth like white spray paint
@jondoe-pe9ob
4 жыл бұрын
@@midbass.maestro I didn't sound deeper? Or sum what were the effects it gave cuz that what I was gunna do in my first box build
@RyanBassForLife
4 жыл бұрын
Try it full tilt next and glue all your seams with wood glue because when you put that wooden brace in the box it separated the top just alittel bit. If not tighten all your screws and put more 3M space age tape inside. Then you will gain trust me I put 3 big bottles of wood glue inside my box and its very efficient!
@RyanBassForLife
4 жыл бұрын
@Mark Seven all the seems and the whole back wall.
@goldhunter9641
4 жыл бұрын
Here is something else to consider with any types of plywood, The Glue Will Get Air Pockets in it, between the layers of The Laminate, that is uneven also, When It's Being Made And That Does Affect The Density Of Each Sheet Of Plywood. I've also believed, MDF Is More Consistent with Density
@JacobViral2
4 жыл бұрын
Great info thanks!
@randomweirdyoutubechannel8955
3 жыл бұрын
I did this with some samsung fart boxes awhile back and it works pretty damn good
@yungsmelly7623
4 жыл бұрын
Jacob will you explain cone control
@JacobViral2
4 жыл бұрын
Added for a future video sometime 👍
@AstroTundraBASS
4 жыл бұрын
Is the vehicle running? What voltage were you at for each test? That makes a difference
@JacobViral2
4 жыл бұрын
Long as compare same result before and after shouldn’t matter I wouldn’t think for just seeing if a gain. No need for vehicle on.
@bobbybland9497
4 жыл бұрын
Even tho its small it can change the internal box volume
@MadDragon75
4 жыл бұрын
If you get tired of that enclosure, I'd love to see one 10" in a folded horn enclosure. I bet you can get a better SPL. And don't criticize yourself bro. Talk away.. It's information, information is worth $.
@RyanBassForLife
4 жыл бұрын
We both love to talk way to much nice video Jacob I like how the subwoofer lookes but that bouncing hammer made me worried. Then you fixed it with that wood pole nice.
@adaboy4z
4 жыл бұрын
I've seen the biggest gain adding 45s in the rear corners of sub box.
@JacobViral2
4 жыл бұрын
Will try sometime thanks
@IndAudio
4 жыл бұрын
Have you changed your port area again?
@JacobViral2
4 жыл бұрын
Yep ;)
@jeremys8360
4 жыл бұрын
Sympathetic resonance. It’s like the box is acting like a giant passive radiator
@jondoe-pe9ob
4 жыл бұрын
I'm first boooiiii how much would I has to increase the air space internally if I want the box tuned to 29 for a zvx18 and how many cubic inches per cubic feet would be fine with that sub?
@TheCloudwalkerFPV
2 жыл бұрын
16 inches per cubic foot is a good starting point of course but if it's got a good suspension then you could go more as long as the air velocity isn't too fast and making the port noisy.
@jacobviralisass1294
4 жыл бұрын
Please I’m begging you to say “It’s not pretty but it works” just a little more
@AstroTundraBASS
4 жыл бұрын
I thought exact same thing
@dirtboy896
4 жыл бұрын
😂
@hayabusaxps
6 ай бұрын
i didnt watch the entire video but your answer was....... it may do something its based on your design...... useless time waste and 1 stick does not make internal bracing
@owensnell4606
4 жыл бұрын
Charge your phone to 100 percent and see if there is a difference
@ernardbonny997
4 жыл бұрын
Talk away it makes sense at the end
@jacobviralisass1294
4 жыл бұрын
Boooooooooooooo
@AWThethrower
3 жыл бұрын
Your phone mic is not accurate at all. This video is utterly useless.
Пікірлер: 43