During this construction video I'll show you how to make a SuperCapacitor bank. These SuperCap's by Maxwell can output some impressive current!
Wiring diagram & schematic: drive.google.com/file/d/1n8Jr...
Parts used:
6x Maxwell Boostcap, 2600F, 2.5v, Model: BCAP0010
500mm of 2gauge insulated copper wire (Red & Black)
4x 2gauge copper lugs
12x 16mm long, M8 bolts & washers
2x 22mm long, 3/4" bolts (to fit zinc battery terminals)
5x M4 x 8mm long, capscrews
1 set of Zinc battery posts (eBay link:goo.gl/d6Pn1d)
12v battery voltmeter (eBay link: goo.gl/S4pPHh)
1x 12mm mini monetary switch (eBay link: goo.gl/z5F8nu)
1x 6 channel 2.5volt balance board (eBay link:goo.gl/KGue5y)
6x mini heatsinks (eBay link:goo.gl/O1upeL)
4x M3 x 12mm long brass standoffs (eBay link:goo.gl/MjB7om)
4x M3 x 6mm long screws
4x M3 nuts
Acrylic box 3D part files: www.thingiverse.com/thing:2256047
Information provided in this video is for educational purposes only.
If you attempt to recreate/replicate anything you’ve seen in this Or any other video, you’re doing so at your own risk.
- SCHEMATIX -
Негізгі бет Тәжірибелік нұсқаулар және стиль Super Capacitor 'Battery' Bank Construction Video
Пікірлер: 143