Had a kid message me on a lawnmower he got to play around with and fix. He asked where a spring went, likely for the governor, and I couldn't find a good clear pic. Your video gave him a perfect show of how to mess with the carb and where that spring went he sent me a photo on. Most people move camera's around so much, you can't see details. Good job!
@bbbjim1fixedit
Жыл бұрын
glad it was helpful
@matthewmarenger534
3 ай бұрын
Excellent video! all fix videos should be set up just the way you did. No fluff, clearly showing what you're doing, and nicely marked.
@bbbjim1fixedit
3 ай бұрын
Wow, thanks
@samjohnson466
3 ай бұрын
Good job sir, thanks. Fixing an old mower for gift to a new couple that moved in neighborhood. I noticed he rented a mower yesterday.
@bbbjim1fixedit
3 ай бұрын
Glad to help
@JRProductionsPGH
Жыл бұрын
It's nice us viewers don't have to fast forward on this one - so boring watching somebody loosen or tighten a bolt in real time. Excellent production Thanks!
@bbbjim1fixedit
Жыл бұрын
glad you liked it
@myotherusername9224
Жыл бұрын
thanks Jim. I bought a mower for $25 an the spring and rod that attaches to the governor was a-danglin', and you showed the location !
@bbbjim1fixedit
Жыл бұрын
glad this helped
@RunningWithSauce
10 ай бұрын
You saved my arse brother, even with Stabl it wouldn't start. Carbs are so cheap these days it was easier to replace and then use my ultrasonic for the other that came off to replace next time. This video was perfect too. Right to the point, no mucking about. I added an inline fuel filter since the replacement came with one.
@bbbjim1fixedit
10 ай бұрын
glad to hear this helped you out
@mp4338
11 ай бұрын
The carburator choke and valve is the same and is located on the out of the carburator before the intake pipe. The engine governor controls the carburator choke via a small rod. The second rod w/spring is for set up the RPM engine. The carburator doesn't have any set up. Use only super 91-93 gasoline w/o ethanol. The ethanol produces the gomme. A valve on the gas pipe from the tank to carburator will be a good ideea.
@robertparmelee6870
Жыл бұрын
Good guide. Shows each step clearly.
@bbbjim1fixedit
Жыл бұрын
Glad you liked it
@jimswordsnchords1759
Жыл бұрын
Looks straightforward. I'll be swapping out the Tecumseh 640017B Carburetor on my Whisperjet leaf blower this week and this was a good primer. Thank you!
@bbbjim1fixedit
Жыл бұрын
glad to help
@autoworkout
Жыл бұрын
Installing the back side nut is the hardest part😄
@bbbjim1fixedit
Жыл бұрын
it can be a bit tricky
@TacoBrad
11 ай бұрын
Just spent 20 mins getting that back on lol
@johngalt9737
5 ай бұрын
Back side nut tape it to the box end wrench to hold in place and get started
@peteosinga8845
3 ай бұрын
I took the whole assembly off including carb and intake manifold. Two small bolts which made it easy to work on
@johngalt9737
3 ай бұрын
@@peteosinga8845 that is what I did to replace hose clamp on carb end of fuel line0
@chrisssmallengines7163
3 жыл бұрын
Parts are available to rebuild these carbs. Very cheap easy to do , nothing runs like a QEM carb.
@THEH2OMAN
11 ай бұрын
That is my question, is it better to replace or rebuild?
@ron851
2 жыл бұрын
Nicely done tutorial
@bbbjim1fixedit
2 жыл бұрын
Glad you liked it
@curly4090
10 күн бұрын
so I have a tecumseh 5 hp engine on a mini bike. that red tube that comes out of the carburetor. mine doesn’t have that. Is that a piece I should have? gas leaks from the air filter on the side.
@bbbjim1fixedit
10 күн бұрын
not all carbs will have the red tube (emulsion tube); you needle valve on your float is likely not sealing causing your gas leak. I wish you the best on your repair
@simonlim9005
Жыл бұрын
Very good video. Thanks
@bbbjim1fixedit
Жыл бұрын
Glad you liked it
@bbtg
2 ай бұрын
Just wondering, is it possible to clean carb. Or replace??
@bbbjim1fixedit
2 ай бұрын
the problem on this one is the needle and seat was leaking causing the crankcase to fill with fuel. A new needle and seat is around $6 and assuming the float is good this carb could be fixed. The replacement carb was about $11. I had good luck so far with after market Tecumseh carbs and hit and miss with Briggs. I wish you the best on your repair
@ManchesterUtdFan
Ай бұрын
Hello, That red line sticking out of the carb hole. I recently cleaned up the carb but when I went to out gas back in it gas immediately started leaking out of that red line sticking out of the carb hole. Any advice?
@bbbjim1fixedit
Ай бұрын
You may wish to look closer at the carb float, for it is likely leaking fuel from the carb bowl through the red emulsion tube. You likely have fuel contained oil if your oil is over filled. I wish you the best on your repair
@ManchesterUtdFan
Ай бұрын
@@bbbjim1fixeditthank you! I’m pretty sure I placed the float correctly but I’ll check again!
@ManchesterUtdFan
7 күн бұрын
I can’t for the life of me put the bolt on the back on. Do you have any tips?
@bbbjim1fixedit
7 күн бұрын
you may wish to try taking off the intake then install the carb to it, yet you may need an intake gasket sine they tend to stick and rip. I wish you the best on your repair
@MrFarmeruk
Жыл бұрын
Hi great job there you know the cover / case that goes over the pully area do you know what type of screw or bolt that holds that plastic casing on?
@bbbjim1fixedit
Жыл бұрын
Glad you liked the video. I am unsure the Fastner size and type since they seam to change from time to time
@6301tom
2 ай бұрын
Hi, please tell me where I can purchase this CARBUETOR and part number ,thank you
@bbbjim1fixedit
2 ай бұрын
The model number will determine the part number. I used 640350 and it good for 5hp through 6.5hp engines. you can find them easy on Amazon or Ebay
@tiberio1352
4 ай бұрын
No adjustment on the new carb at all????
@bbbjim1fixedit
4 ай бұрын
No adjustments needed, all settings are fixed and not adjustable, I wish you the best on your repair
@tiberio1352
4 ай бұрын
@@bbbjim1fixedit very grateful for the response !!!! I replaced mine, NO leaks...but it does not start. That screw at the bottom of the carb is all the way out...and the old one is all the way in. I wonder if I needed to adjust it. I am going to change the plug as well. Thank you again, mate !!!
@tonygonzalez9167
4 ай бұрын
I have a lawn mower Craftsman shuffle pills I got a question it runs and dies out after little time what can be the problem
@bbbjim1fixedit
4 ай бұрын
May wish to try loosening the fuel cap, if it starts to venting feature is likely not working properly. I wish you the best on your repair
@erikhamilton4866
Жыл бұрын
Is it normal for one of these carburetors to have gas leaking out of that red straw into the filter and then out of it? I bought a 4000psi water pressure sprayer dor 6 bucks and I can not figure out if that is normal or not or why it would do that.
@bbbjim1fixedit
Жыл бұрын
The only time you should have fuel coming out of the bottom red tube is when using the primer. Constant leaking is not normal
@johnfatorich3494
2 жыл бұрын
I have fuel leaking into the air filter from the red tube of the primer bulb. Any idea why it's doing that?
@bbbjim1fixedit
2 жыл бұрын
you may wish to take a closer look at the needle valve and seat, I wish you the best on your repair
@user-ry7km8uu2g
Жыл бұрын
My carb has choke lever looks like the governor lever both on top the carb
@bbbjim1fixedit
Жыл бұрын
that maybe the throttle
@mrBDeye
Жыл бұрын
Can you tell me where the part number is located? I have the exact carb with red primer bulb on my Earthquake Rototiller.
@bbbjim1fixedit
Жыл бұрын
look for a decal on the flywheel blower housing, I wish you the best on your repair
@lisarees5042
Жыл бұрын
thanks
@bbbjim1fixedit
Жыл бұрын
glad you liked the video
@hectorflores9586
2 ай бұрын
My self propelled lever won’t stay down
@bbbjim1fixedit
2 ай бұрын
you may wish to look closer at your cable for it may be broken. I wish you the best on you repair
@MrIg3845
Жыл бұрын
hello, where did you order your carb?
@bbbjim1fixedit
Жыл бұрын
you can get them from Amazon or eBay, I wish you the best on your repair
@Ro-Bucks
10 ай бұрын
I need to find just the two screws that hold teh intake manifold on and whaaaa. can't find them lol
@bbbjim1fixedit
10 ай бұрын
glad to hear I am not the only one things like that happen to. I wish you the best on finding them
@michelb7998
Жыл бұрын
Hello and thank you for the clarity of your video. can you give me the part number of the carburetor you bought on ebay.
@bbbjim1fixedit
Жыл бұрын
since a lot of these carbs look the same but are different, you will need to find your part number by looking for the engine number on the decal located on the flywheel housing. I wish you the best on your repair
@melnicdaniel697
2 жыл бұрын
From where you buy the carburator ?
@bbbjim1fixedit
2 жыл бұрын
Amazon or eBay have them, I wish you the best on your repair
@mikbru2464
2 жыл бұрын
you could teach a small engine class
@bbbjim1fixedit
2 жыл бұрын
I have around 50 videos on power equipment
@carlosj.g7683
3 ай бұрын
😎✌👍
@bbbjim1fixedit
3 ай бұрын
glad you liked the video
@user-ry7km8uu2g
Жыл бұрын
Where is the choke
@bbbjim1fixedit
Жыл бұрын
this engine uses a primer button, so there isn't a choke
@user-ry7km8uu2g
Жыл бұрын
I can’t find part number for motor model number lev115 350154e D
Пікірлер: 76