Love your content, and hearing the progress on your builds and the tuning you do ✌😎
@FullThrottleRC
4 жыл бұрын
Thanks for your support!!
@guerrillaradio9953
4 жыл бұрын
I like your style and ideas. To me, it's the perfect mix of trying new things and action. This channel is underrated. Keep it up, man!
@FullThrottleRC
4 жыл бұрын
Thank you for the kind words!!
@ernestquinones1898
4 жыл бұрын
Always enjoy your videos thanks
@FullThrottleRC
4 жыл бұрын
Thank you!
@KurtsRCs
4 жыл бұрын
Very nice it is hooking up good 👍👍👊🔥🔥
@felixotero1
4 жыл бұрын
Cool video I’m getting into the drag seen should be out testing this weekend
@FullThrottleRC
4 жыл бұрын
Awesome!
@robschierbaum
3 жыл бұрын
Great video my friend.
@FullThrottleRC
3 жыл бұрын
Thanks!!
@JohnB-le2pi
3 жыл бұрын
Thank you for your vids- I'm currently building a B5M no prep car and have been following closely. I do have one suggestion; In the original build vids on your car, you changed out the rear lower A-arm mount/inserts so you could get zero rear toe. I have noticed in your testing vids that your car launches straight, but tends to get squirrely on the top end. I'm guessing it's not having any rear toe angle. A notable no prep drag racer has said that rear toe in helps higher speed stability- He suggested about 2 degrees of rear toe in. Pretty easy and simple to try, as you already have the factory parts to change it. Worth a try? Thanks again for your vids and I will keep an eye out for more!
@FullThrottleRC
3 жыл бұрын
Thank you!! I'm pretty sure I have put those factory inserts back in now but I'll have to check again to be sure.
@JohnB-le2pi
3 жыл бұрын
@@FullThrottleRC Also Associated made a set of the mounts with different holes to change the rear toe, and also anti-squat to alternate settings. The part number is ASC91532. They are all over Amazon and Ebay for about $5-$7 a set- I just ordered a set myself just now on Amazon! Thanks for your reply!
@jderbedrossian
4 жыл бұрын
Your mid et’s are great (66’) you’re on track to run mid to low 2’s in the 132’ comparing to the time slips I have that’s extremely competitive, what ESC are you running again?
@FullThrottleRC
4 жыл бұрын
That sounds really encouraging! Currently running the Castle Mamba X. Looking into a Hobbywing XR10 or Tekin RSPro
@jderbedrossian
4 жыл бұрын
FullThrottleRC how about the new Castle Mamba Monster X? I’ve been eying it lately
@alyarmak9871
4 жыл бұрын
@@FullThrottleRC what gearing are you running with you 3.5 motor in 132 foot.
@FullThrottleRC
4 жыл бұрын
@@alyarmak9871 I haven't been able to run this motor to 132ft yet
@alyarmak9871
4 жыл бұрын
@@FullThrottleRC ok, what are you running in the 66 foot
@dragon_skyshadow4484
4 жыл бұрын
nice content
@drifter4203
4 жыл бұрын
Is that a scale 1/8 mile or 1/4 mile . Really love your vids , only come across u today and I got a 1/6 Ford F-150 lightning drag truck I’m building. It’s also a hard body newbright lol. Running 2 motors to help with heat
@FullThrottleRC
4 жыл бұрын
Thanks! I mostly run a scale 1/8 mile or 66ft due to the limited space I have easy access to
@powermadracing5116
4 жыл бұрын
Sweet looks awesome
@FullThrottleRC
4 жыл бұрын
Thank you!
@thercsyndicate9867
4 жыл бұрын
Would you recommend running the cap? I picked up a rig that had one and I feel it heated my esc up way too quickly. I didn't really notice a difference either.
@FullThrottleRC
4 жыл бұрын
It's definitely useful in racing. The power is a lot more responsive I would say with the cap. If you're just bashing I wouldn't say you would need one.
@thercsyndicate9867
4 жыл бұрын
@@FullThrottleRC sounds good. Thank you for the info. Keep up the great work on your channel.
@Lushiouscorey2011
4 жыл бұрын
Love the video on this one, I also wanted to comment that it was the low voltage cutoff and not the over-current warning you heard. I have the same esc with the 7700kv setup so it's around a 4.0 motor and after 20 rips on it I get the same warning. Need a good battery with over 110c.
@FullThrottleRC
4 жыл бұрын
Thank you! I was able to see the information in the data logs where it said the low voltage cutoff was coming in later on. Don't have to worry about that anymore though 😁
@Lushiouscorey2011
4 жыл бұрын
@@FullThrottleRC being that I have the same both of the same esc's you have, which one do you think is more powerful?
@FullThrottleRC
4 жыл бұрын
Personally, I like the hobbywing for drag racing so far
@julito3054
4 жыл бұрын
Awsome video....let us know which esc you choose to handle that motor👍
@FullThrottleRC
4 жыл бұрын
I've already upgraded the ESC! You can check out some of the more recent videos on my channel to see how the car performs now with the new ESC 👍
@classy333
3 жыл бұрын
That mamba x is UNDERPOWERED? I jus got mine while planning on using it on the castle 9000kv motor. Bruh. Also what battery do u use?
@FullThrottleRC
3 жыл бұрын
I'm running a 3.5t motor and it was underpowered for that motor. Using a SMC 2s 5000mah pack and a gens ace 2s 6000mah pack. The ESC would go into overload protection during every pass
@classy333
3 жыл бұрын
@@FullThrottleRC damn it. Did u do any programming with the castle link cus that might help
@FullThrottleRC
3 жыл бұрын
@@classy333 yep, I tried a bunch of things. I had to turn it way down to make passes without the overpower warning kicking in
@classy333
3 жыл бұрын
@@FullThrottleRC ok thank u
@NBC_NCO
4 жыл бұрын
Is the car launching to the left or are you correcting it from going to the right ? Very very cool.
@FullThrottleRC
4 жыл бұрын
It was launching a little to the left. It looks like my wheelie bar might not have been level which could have caused that
@direwolf9058
4 жыл бұрын
@@FullThrottleRC SWEET RIG, and excellent tuning. I also run no prep, on a mid motor traxxas build. I run a 4.0 turn motor, if you run a 3.5 turn? Try unlocking the diff and using about 100 k diff oil.i believe Your car will shoot MUCH straighter. Good luck & great videos.
@Bassin07Si
4 жыл бұрын
Ive got an old Associated B4.2 you think its worth converting it to a drag car or is the mid motor a better set up??
@FullThrottleRC
4 жыл бұрын
Its worth a try if you can get the parts needed. Just about everyone runs short course length wheel base with buggy track width. You would need to swap out the chassis for a short course chassis to extend it.
@norcalrc
4 жыл бұрын
looks real good bro. do you have your diff locked? or?
@FullThrottleRC
4 жыл бұрын
Yep diff is locked completely
@norcalrc
4 жыл бұрын
FullThrottleRC okay cool. good to know. i just loaded up my diff with some super thick diff oil , but i’m wondering if i should have just locked it instead.
@direwolf9058
4 жыл бұрын
@@norcalrc I wouldn't recommend locking the diff out. See how his car wants to pull to the left? I use 200 k diff oil, and the car stay much straighter.
@jderbedrossian
4 жыл бұрын
Derek Marshall he needs to tune the suspension for the pull nothing wrong with a locked diff;)
@powermadracing5116
4 жыл бұрын
@@jderbedrossian correct
@polishguywithhardtospellna8227
4 жыл бұрын
I believe the cap pack should be able to radiate heat, did you wrap yours in electrical tape?
@FullThrottleRC
4 жыл бұрын
I did. Probably not the best idea, but I haven't had a problem with it yet. The ends are still open so maybe that's why I'm not having any heat issues.
@christopherrivas8917
2 жыл бұрын
Hey my love your channel question This is driving me crazy for a couple weeks my voltage is dropping no more than low 5v and sometimes low 3v do you think capacitor help the situation new battery r1 11400 2s Hobbywing 4.5t low boost and turbo every gear and nothing my capacitor is really small thanks any help thanks
@FullThrottleRC
2 жыл бұрын
I would definitely say a capacitor should help, or a larger one. But voltage drop as low as 3 volts seems extremely low. I would check your wire size or connectors to make sure you can pull enough amps through them.
@christopherrivas8917
2 жыл бұрын
@@FullThrottleRC I have XT 90 a double check everything. And I’m going to try at 3.5 motor thanks
@shadow7037932
4 жыл бұрын
Capacitors pass current through them. They don't impact current. They can however reduce voltage sag.
@FullThrottleRC
4 жыл бұрын
Yea I may have misspoke when trying to explain it. The capacity stores energy which is used when the voltage from the battery drops
@Overland_RC
4 жыл бұрын
Hey It's the slipper 😉
@FullThrottleRC
4 жыл бұрын
😂😂😂
@TT-yg2np
4 жыл бұрын
Did you end up replacing the ESC? If so what did you end up putting in?
@FullThrottleRC
4 жыл бұрын
Sure did. I'm running a Hobbywing XR10 Pro now, you can see how it performs in some of my new videos.
@TT-yg2np
4 жыл бұрын
@@FullThrottleRC thanks
@mohamadfauzery
3 жыл бұрын
Halo bro..what capacity for cap pack..do u know how much voltage and uf for your cappack??
@FullThrottleRC
3 жыл бұрын
This is the Castle Creations cap pack. You can find all the information for it here www.castlecreations.com/en/cc-cap-pack-011-0002-02
@justin6125
3 жыл бұрын
mais you sound like you from louisiana baw where you from?
@FullThrottleRC
3 жыл бұрын
I am from south Louisiana
@justin6125
3 жыл бұрын
@@FullThrottleRC me too im from houma
@powermadracing5116
4 жыл бұрын
Vote for ESC Pro black love the data logging
@FullThrottleRC
4 жыл бұрын
That's one of the two ESCs I'm looking at. A little worried about the temps since it doesn't have a fan and it gets pretty hot down here in the south.
@powermadracing5116
4 жыл бұрын
@@FullThrottleRC for drag racing it works fine .. I'm in fl
@FullThrottleRC
4 жыл бұрын
@@powermadracing5116 I do a lot of testing, and back to back runs. I'm worried about heat making a bunch of passes right after each other.
@powermadracing5116
4 жыл бұрын
@@FullThrottleRC that could be an issue for you
@FullThrottleRC
4 жыл бұрын
@@powermadracing5116 yea I have another ESC in mind that I may try
@angelathellas5215
4 жыл бұрын
That thing has so much ch power
@FullThrottleRC
4 жыл бұрын
I'm pretty happy with the amount of power the car has now. It's all about getting it down to the ground now.
@angelathellas5215
4 жыл бұрын
Yes it is
@manuel39164
4 жыл бұрын
Hi is this a Asso b5m Chassic
@FullThrottleRC
4 жыл бұрын
It started as an Asssociated B5M but I have added the SC5M chassis to stretch it out
@nastynat5671
4 жыл бұрын
is that the 1/8 or 1/10 mamba x esc
@FullThrottleRC
4 жыл бұрын
This is the 1/10th. The 1/8th would probably do a better job of getting the amount of power to the motor
@manuel39164
4 жыл бұрын
What Tires You drive
@FullThrottleRC
4 жыл бұрын
2.2 proline primes
@jeremyhollamon1343
2 жыл бұрын
Dude! I thought you were black since day one I heard you. Interesting
@FullThrottleRC
2 жыл бұрын
That old saying, never judge a book by its cover, always coming back hahaha
@peebz727
4 жыл бұрын
Would you be willing to print me up a rear shock extension like yours? I'll pay i just don't have the means to make one
@FullThrottleRC
4 жыл бұрын
Unfortunately I don't have the means to ship anything right now with all the stay at home stuff. Whenever this is over or slows down, I'm hoping to have a couple printed parts available for people who can't print their own.
@peebz727
4 жыл бұрын
@@FullThrottleRC when its all over let me know id definitely like to get one
@FullThrottleRC
4 жыл бұрын
@@peebz727 thanks!
@arvitorgaming3055
4 жыл бұрын
I hear ur gears grinding
@FullThrottleRC
4 жыл бұрын
I think what you are hearing is the slipper clutch slipping. I missed it at first as well.
@arvitorgaming3055
4 жыл бұрын
Ok I was just letting you know what I heard
@tobydyes
2 жыл бұрын
Slipper clutch Eliminator
@FullThrottleRC
2 жыл бұрын
I believe that'll be coming soon...
@jacobtreadway3122
10 ай бұрын
Man o man your accent totally makes me home sick . Down the bayou boy getting it in !
Пікірлер: 100