Very nice. Never been a big stance guy myself but def can tell a difference on your 86. 👍
@BrosFOURRSpeed
Жыл бұрын
Thanks 👍 it makes a big difference!!
@s6tringplayer
Жыл бұрын
I ran 2 inch on my wide body brz for a bit before my wheels came in . I would not recommend going that big for anyone but smaller sizes never had issues.
@Aschoolbusandsimulatorfan
Жыл бұрын
Helpful!!! Thank you.
@BrosFOURRSpeed
Жыл бұрын
Glad it was helpful!
@Samuell32
11 ай бұрын
Thank you for your tips. May I ask you what body kit do you have? Thank you.
@BrosFOURRSpeed
11 ай бұрын
Here's the link to all the parts! brosfourrspeed.com/parts-%26-merchandise/ols/categories/toyota--subaru-frs86brz The installation video for them all! kzitem.info/news/bejne/xH-D3ZisjHujlqw
@Thebusdriverandgamermorefan
Жыл бұрын
Never seen that part, Thanks for warn me.
@BrosFOURRSpeed
Жыл бұрын
As long as they are hub centric and a reputable brand, you'll be safe!
@Rafael-wb8my
11 ай бұрын
@@BrosFOURRSpeed is aeroflowdynamics considered a reputable brand
@amill1563
Жыл бұрын
Do lowering springs degrade ride quality that much?
@BrosFOURRSpeed
Жыл бұрын
Over time lowering springs could. Coils would be a better way to go, but springs are a good option on a budget.
@tleoipl37
Жыл бұрын
If it’s hub centric and not a crazy size , you can safely run it
@BrosFOURRSpeed
Жыл бұрын
Exactly!
@LegnaVolokin
11 күн бұрын
What size is considered crazy ?
@ernestwaxteriii1179
6 ай бұрын
Where did you get your front splitter and the other ground effects? Thank You.
@BrosFOURRSpeed
6 ай бұрын
Let us know if you have any questions! brosfourrspeed.com/parts-%26-merchandise/ols/categories/toyota--subaru-frs86brz
@xz_.001
3 ай бұрын
Quick question tho. If all of the spacers and Hubcentric is all done properly. Will this still damage the Wheel bearing ?
@BrosFOURRSpeed
3 ай бұрын
No. Doing good spacers like these will be fine. It's when people install non hub centric spacers they got off Ebay on their 200k mile car and then complain the bearing failed. Those are the people that have the issues
@speedisf
Жыл бұрын
Ohhh ok cool 👍👍👍👍
@J.R.F.23
2 ай бұрын
Do the factory closed end lug nuts work with the spacers? I am going to use 20mm front and back on the factory tires and rims. Any input is really appreciated
@BrosFOURRSpeed
2 ай бұрын
Yeah I used the same stock lugs for these.
@jesusourlordandsavior950
11 ай бұрын
Do you think if I go 30mm I’ll need to adjust the camber?
@BrosFOURRSpeed
11 ай бұрын
Probably. This is as wide as I'd want to go. Anymore you'll lose traction with aggressive camber
@jaydenfajardo833
11 ай бұрын
why 20mm for the front and 25mm for the rear? great looking mod by the way !
@BrosFOURRSpeed
11 ай бұрын
I mentioned that in the video. 25mm up front wouldn’t be flush, they would rub being that far out.
@caesarsandwich
6 ай бұрын
how safe is it to use the stock studs for this large of a spacer? id think it would be safer to replace them with something stronger?
@BrosFOURRSpeed
6 ай бұрын
This isn’t a large spacer so the factory bolts worked just fine! Plenty of room to tighten them properly.
@caesarsandwich
6 ай бұрын
@@BrosFOURRSpeed I see online that the stock studs have a reputation for being weak. debating on arp studs but it looks like a hassle to replace them.
@BrosFOURRSpeed
6 ай бұрын
@@caesarsandwich yeah that’d be a bit of work. However there’s no more pressure on the stock ones with the wheel spacers then without.
Пікірлер: 30