👉 xTool S1 Diode US Store: bit.ly/48RUUO9 UK Store: bit.ly/46UVSqV EU Store: bit.ly/46k7VNE CA Store: bit.ly/xToolS1CA FR Store: bit.ly/xToolS1FR DE Store: bit.ly/xToolS1DE
@patrickrudbeckcarstensen9811
11 ай бұрын
That is awesome!
@CorneliusCreations
11 ай бұрын
Glad you enjoyed it!@@patrickrudbeckcarstensen9811
@dtork47
11 ай бұрын
You really got me considering! Thanks as always for very helpful videos! Stay safe
@taylajade7779
9 ай бұрын
My favorite part of this video, is the mistakes. Thanks for reminding us that we are all human. It’s easy to get discouraged when you’re learning and material is wasted! I just subscribed to your channel! 🖤
@wilkit1
2 ай бұрын
Yeah, he talks a good game, but he never tells you how shitty their customer service. They give you the runaround, lack the ability to understand basic English. I have an S1 with the rotary attachment, and the rotary attachment is junk. It doesn’t work. I basically been given the runaround.
@atbien21
11 ай бұрын
Nice review. How thick of a piece of wood can it handle without the riser base? Thank you again for great review!
@crochetingmemorieswithcj6408
11 ай бұрын
Great video. Would love to see you engrave a 40 oz Stanley tumbler full wrap
@sangordon4965
Ай бұрын
Hi, I appreciate your video! I'm trying to mass produce little wooden hangers with 3 holes. do you teach? Would this be the right tool for me do you think? Thanks
@CorneliusCreations
Ай бұрын
I’m sure this could!
@KarloPedrin
3 ай бұрын
Hello, could you help me? I have the Xtool S1 40W, and when engraving a tumbler, it stretches the image towards the sides and I struggle a lot to center it. When I align it, the laser moves to another place or the RA2 rotates the tumbler.
@CorneliusCreations
3 ай бұрын
Hey there! Do you have Facebook? I promise the S1 facebook group will answer that question almost immediately. It sounds like the proper settings isn't inputted.
@verngrissom4943
Ай бұрын
I would like to make a purchase but I cannot get them to answer the phones
@RusticByNature
Ай бұрын
When you say the dimension is 18" tall is that with the riser ?
@proudcanadianeh4663
10 ай бұрын
does the 20W version cut through 3-6mm+ wood nicely like teh website suggests?? im just about to order it but i barely see any cutting tests of teh S1 out there and getting me nervous to buy... all cuts are so thin at only 3mm...
@CorneliusCreations
10 ай бұрын
The 20W will handle that cutting with ease. They are powerhouse machines. I think people do 3mm cutting just to show you the accuracy and cut test. They will handle a lot more.
@proudcanadianeh4663
10 ай бұрын
@@CorneliusCreations Thank you!!!
@Metal_Vistas
9 ай бұрын
I was very interested in the S1 until recently, when I began seeing reports from D1 and D1 Pro owners that replacement parts are no longer available for those machines, and you can no longer purchase modules for them, other than the $1,200 40w module for the D1 Pro. Given the fact that xTool was heavily promoting those machines less than a year ago, this is VERY concerning. In my opinion, a tool or an electronic component at this price-point should have more than 1 or 2 years of support from the manufacturer. I would be outraged if I spent more than $1,000 and was told I own a paper-weight after a year or two. After learning how limited their support is, I have crossed xTool off my list of contenders.
@jamesmanson1555
8 ай бұрын
What is the paper an the purpose you had on the acrylic? I didn't think the S1 would cut acrylic (or maybe It says only dark acrylic), but it looks like you were able to. Never used a laser before, but considering getting one. Thanks!
@Phenom999able
Ай бұрын
Hello I appreciate you posting this I don’t know how often you check your comments but for your leather after engraving smear black or whatever color liquid paint you want and it should give you close to what you want it to look like
@mattwlane
3 ай бұрын
Any issues with glue ups after cutting pieces with a laser? For instance if I cut a bunch of box joints would glue them together be compromised in any way? Can't wait to get mine!
@philipershler420
11 ай бұрын
Ya know what? I watched the XTOOL livestream last night. Well suffice it to say, I now have an 10 watt XTOOL D1 with enclosure and honeycomb panel for sale. I bought the 40 watt S1 that comes with the fancy air assist and honeycomb panel by the time the livestream was over. And best of all, these units are IN STOCK, for immediate delivery in the US! I can hardly wait.
@CorneliusCreations
11 ай бұрын
You made an awesome decision. I promise you won’t be nothing but impressed by it!
@kyodox495
6 ай бұрын
I just bought mine today!
@GiuseppeBrowne-s2f
Күн бұрын
Litzy Viaduct
@HobsonRachel-v3w
Күн бұрын
Mosciski Knoll
@bertmoss4205
Ай бұрын
In your opinion is this easy to use for a complete novice who has no laser engraving experience
@CorneliusCreations
Ай бұрын
This is easy, and you can learn anything once you get used to it! I recommend the M1 and F1 with a camera as well.
@nick_coles_art
3 ай бұрын
Hi, i set my s1 up yestetday and i have the 40w. Is that the complete all rounder or is it better to get the 20w aswell for engraving?
@AlbertDorchy-h8g
Күн бұрын
Conn Lakes
@bleumeanyontherampage2136
11 ай бұрын
What is the bed size of the machine? Not the working area of the machine. I engrave 15"x15" concrete, wondering if this will fit in this machine.
@ChadsCustomCreations
11 ай бұрын
Matt what an awesome overview! I aspire to have my production value at your level one day. Not sure if it’s just my browser or not but at minute 5:30 in the video it seems something got jumbled in the edit. I know the pain of a re-upload but maybe just the KZitem editor can allow you to clip that spot.
@CorneliusCreations
11 ай бұрын
Chad thank you so much for the kind words! It means a lot! Oh my gosh…. That would be premiere 😥 I will do the KZitem editor thank you for letting me know, I don’t know how I missed this
@BrianBragg-r8q
20 күн бұрын
Emiliano Viaduct
@christinep456
5 ай бұрын
Is your $200 discount code for U.S. Store still valid?
@OtisMack-v7k
25 күн бұрын
Harris Stravenue
@MansfieldBblythe-x8r
26 күн бұрын
Colton Springs
@SpenderHansom-e6c
13 күн бұрын
Lexus Square
@glock2101
11 ай бұрын
Hope some of the new creative space features will be backwards compatible with the D1 pro!
@MauriceArno-n7m
Ай бұрын
Wilmer Land
@justincornelius1884
6 ай бұрын
My last name is cornelius lol never met another cornelius
@CorneliusCreations
6 ай бұрын
Oh wow! Nice to meet you Cousin!
@allsopd
2 ай бұрын
Can I ask how long it took to engrave the bamboo cutting board approx?
@JanethgCueto
9 ай бұрын
I love how I explained this machine! Very detailed and answered all my questions. Do you know if you can ingrave on a hat. On a fedora felt hat?
@bobbyhumphries7902
11 ай бұрын
Just un-packed my new xTool S1 with the complete bundle. Assembled it as required. One thing I am HIGHLY PISSED at is the sentence in the setup manual that says, "optional accessories---Air Assist." In setup it says do not use until you have Air Assist. WHAT IN THE HELL xTool. NOT COOL........
@CorneliusCreations
11 ай бұрын
I will have to check the wording but if you bought before Nov 2, you should have a free air assist shipping to you
@GarfieldCoxum-x5p
27 күн бұрын
Maria Walks
@jacobmathis5212
10 ай бұрын
Awesome video!!! I am just now starting to research these and was wondering if it will engrave/cut thin aluminum?
@JoeyMcNew-Drummer
11 ай бұрын
Nicw video! Just wondering if this would be worth the money since I have the D1 Pro 40 watt with the xTool 1064nm Infrared Laser Module for D1 Pro machine. I have the premium with the Air assist, honeycomb, etc. I have everything possible to purchase for the D1 Pro. I'm not sure that it would be anything I need. I also purchased the Laser Pecker 4 premium package as well. Any thoughts?
@CorneliusCreations
11 ай бұрын
You already have a wonderful setup and are invested well. If anything to add to your arsenal would be a C02 laser if you were to do a lot of production stuff. I think I would hang on to what you have!
@JoeyMcNew-Drummer
11 ай бұрын
@@CorneliusCreations Thanks for the response. I was thinking the same thing, I appreciate your confirmation.
@OthaFolley-t1u
28 күн бұрын
Ewald Plaza
@dragonfroststudio
10 ай бұрын
I am honestly thinking of getting the S1 and selling my D1 Pro with extension kit. The S1 just seems like a cleaner setup (less hassle also) and actually with pass through can run even larger sheets. Thank you for this video and appreciate that you also show settings that you used.
@CorneliusCreations
10 ай бұрын
Glad you found it useful! I understand where you are coming from, it will be hard to go to an open diode laser after using this!
@Metal_Vistas
9 ай бұрын
Before pulling the trigger, you might want to check out the parts and module availability for your D1 Pro. I have been told by a few people they cannot get replacement parts or modules for the D1, only the 40w is available for the D1 Pro, and it has been this way for months, they say. The service life & tech support would be a big consideration for me before investing further in xTool products... even if your D1 Pro is still working fine.
@dragonfroststudio
9 ай бұрын
@@Metal_Vistas Support has been hit and miss thus far for me and they do seem to favor certain countries.. but i wish to not get into that, lol. I have decided to stick with my D1 Pro 20W but may look at their F1 in the future. I also have an Elegoo Phecda which really is it's early stages.. Thank you anyhow for advice.
@staceyengstrom2012
4 ай бұрын
@@Metal_Vistas Is the overall customer service poor? ty...Just now researching all the laser products for a small home business. any suggestions, much appreciated! ty
@Metal_Vistas
4 ай бұрын
@@staceyengstrom2012 I am probably the wrong person to ask because I decided not to purchase any products from xTool.
@chuckstrunk3746
4 ай бұрын
I have the F1 and will (hopefully) be adding the S1 fairly soon thanks to your great, informative video!!
@CorneliusCreations
4 ай бұрын
Glad you enjoyed it!
@sbr-synrosimbugracing9338
10 ай бұрын
Can your test file work with the S1 with the 20W module? @CorneliusCreations ?
@CorneliusCreations
10 ай бұрын
Yes it will :)
@ValYo0623
2 ай бұрын
Can you put a link to the magnetic clamps you use?
@PoppyHillDesigns
11 ай бұрын
Great video! I have the M1 and enjoy it, but the new features in the S1 are really cool. Looking forward to seeing more projects with this machine. If possible can you mention the time a project takes. Thanks.
@zedinator
11 ай бұрын
My S1 is on order on the first day it was shown.
@LyndaandAbbieHart
11 ай бұрын
How big a tumbler can this laser do with the riser? Specifically, it is big enough for the 30oz tumblers (4.12 inch diameter), or the big Stanley tumblers with the handle?
@CorneliusCreations
11 ай бұрын
I will have to measure, but I believe it will accommodate it!
@cedarandsound
9 ай бұрын
Based on how every youtuber reviews things, every laser cutter brand and model has "cornered the market". It's a tell-tale sign of a paid review, whether the review is honest or not.
@CorneliusCreations
9 ай бұрын
You are sadly mistaken my friend.
@ChrisBloom
11 ай бұрын
I'm a little confused on the rotary attachment. You said it was the RA2 rotary attachment, but when I look on xTool's website, when they show the bundles it looks like the RA2 attachment they show is the one with the chuck to hold the material not the rollers. Is the roller one the one they actually send? I *think* I'd like the chuck one better, but I've never done rotary lasering (yet).
@CorneliusCreations
11 ай бұрын
Hey Chris! So the RA2 pro rotary attachment comes with BOTH the jaw chuck and the rollers. I made a video about a year ago showing it if you’d like to check it out. The picture you see probably is just with the jaw chuck attached.
@gloriagonzales8731
11 ай бұрын
I have the XT F1 and it shows a preview of exactly where it's going to go like an outline and then it actually shows the preview. Does this not do that?
@ShyneflowLC
11 ай бұрын
This does not... the f1 does this because it uses a galvonometer rather than a rail system... this means the f1 uses a set of mirrors to quickly move the laser around.
@CREATEFOTO
10 ай бұрын
There's no shipping for Greece 😢.....
@FelixNielsen
7 ай бұрын
Gosh Darnit, I Forgot to Auto Focus...
@AyşeKaya-f7d
14 күн бұрын
Von Forest
@godeater5561
10 ай бұрын
What is it that you recommend for a beginner's home use? I'm looking at the new Wecreat Vision right now it looks like a really good deal.
@Metal_Vistas
9 ай бұрын
I have seen videos comparing these 2 machines, the S1 and WeCreat, so that might be worth checking out.
@unclesam239
9 ай бұрын
What mm/s was this cutting at? 14:52
@realtalkcreates
10 ай бұрын
i want this and i will have it mainly because of your review ... subscribed !
@CorneliusCreations
10 ай бұрын
So glad the review was of value you to you! I appreciate the kind words!
@rachealleaelliott2577
5 ай бұрын
thank you
@ladyscorpion7233
11 ай бұрын
Hi can I ask a question? Since u have the P2 & in the S1 also which one of the two is the best to purchase? P2 or S1. Can the P2 cut metal? Thank for u’r time responding to my ?, much appreciated. 😊
@CorneliusCreations
11 ай бұрын
Hey there! Great question. The P2 or S1 is not able to cut metal. I would advise you to look at your needs. The best laser is the one that fits your needs, your lifestyle, and the projects you are making. The P2 is a production workhorse and can handle a wide range of material cutting and engraving. The S1 can do the same, but with the option to have the IR module for metal. If you watch my video from 4 weeks ago, I give info that will help you decide :) you won’t go wrong with either one.
@ladyscorpion7233
11 ай бұрын
@@CorneliusCreations thank you, appreciate the info
@lamberthugh8316
4 ай бұрын
@@ladyscorpion7233 If you need to cut metal, a fiber laser or CO2 laser might be a more suitable option.
@BradO-u9c
4 ай бұрын
Great session gang watch this one a few times lots of nuggets!!
@CorneliusCreations
4 ай бұрын
So glad you found value in it!
@karmindersandhu5776
10 ай бұрын
Which is best - S1 or X1 ?
@arthurtotherow8208
11 ай бұрын
Where did you get the honeycomb clips from?
@CorneliusCreations
11 ай бұрын
They came with the honeycomb grid :)
@TheDoctorRust
11 ай бұрын
But does it cut 1-2mm brass that’s the question
@ShyneflowLC
11 ай бұрын
No it does not
@cristi08g
11 ай бұрын
How long it took to engrave the tumbler? Thanks!
@CorneliusCreations
11 ай бұрын
This one took way too long because the error with the SVG file
@jeroenscheffe5730
11 ай бұрын
Hi CC, thanks for the review; I enjoyed watching it. You were talking about the link to the test file, I might have missed it but I could not find it in the description. Thank you in advance for sharing. Cheers, Jeroen
@CorneliusCreations
11 ай бұрын
Hey Jeroen! I appreciate the kind words! I just updated the description. You should be able to find them now!
@jeroenscheffe5730
11 ай бұрын
Hi Matt, thank you for your fast reply and for the link! Kind regards, Jeroen
@nelsonmick
11 ай бұрын
Real nice review! Can you link me to where I can buy those magnetic hold-downs please?
@catfisherboy
11 ай бұрын
They come with the S1---not sure if available seperatley
@CorneliusCreations
11 ай бұрын
They come with the honeycomb :)
@_thisisdavid
7 ай бұрын
I was almost sold on purchasing this unit until I realized it doesn’t have the camera for quick setup 😩
@CorneliusCreations
7 ай бұрын
I can understand your hesitation. Cameras are awesome to have, this positioning system still makes it extremely easy to use. Have you compared this to the P2?
@_thisisdavid
7 ай бұрын
@@CorneliusCreations honestly been going back and forth about which laser to get the past couple of days. For me stuff like this is a bit easy to do. But I’m thinking of my not so tech savvy wife. As well as this would be our first laser and looking into starting another side hustle. Too many options. Was looking at the fact that I can add the ir module so she can engrave jewelry. And so I can have a larger work service for wood projects or batch processing patches.
@CorneliusCreations
6 ай бұрын
Hmm, have you looked at the F1 then?
@_thisisdavid
6 ай бұрын
@@CorneliusCreationsthe F1 was a thought. But then plans changed and we decided to start a boys hat and apparel company 😂. Going back I wish I would have just went with the S1. Because we went with the M1 because of the camera and the ability to cut vinyl. The camera is not so great. Doesn’t actually line things up correctly.
@LemonLimes99
3 ай бұрын
@@_thisisdavid what did you end up getting?
@sheltoncherry2366
11 ай бұрын
Does the laser during cutting mark the bottom floor of the box? Looks like the honeycomb does not come with its own floor plate like for the D1
@CorneliusCreations
11 ай бұрын
My honeycomb did not come with a floor.
@sheltoncherry2366
11 ай бұрын
@@CorneliusCreations yes but without the honeycomb floor do you get burn marks on the floor of the laser enclosure?
@troublebot
11 ай бұрын
@@sheltoncherry2366 From what I've seen, if you're cutting through the material without using the honeycomb, it will likely mark the floor. For cutting you should definitely use the honeycomb, the thickness of the honeycomb will make it so that when the layer strikes the floor below it (in the gaps), it won't be in focus enough to mark the floor. In another review, the reviewer actually used the laser to draw an alignment pattern on the floor so he could use that for alignment when just engraving.
@dzrtmama
4 ай бұрын
Thank you for all the help!!
@CorneliusCreations
4 ай бұрын
Glad you got something out of it.
@HenryKim-u8l
11 ай бұрын
is it better than Glowforge? Thanks for the good reviews!
@CorneliusCreations
11 ай бұрын
Hey there! I hate to biased… but I wouldn’t buy a glowforge.
@HenryKim-u8l
11 ай бұрын
Thanks for the good advice!! 👍
@CorneliusCreations
11 ай бұрын
You are welcome!
@goran1504
11 ай бұрын
Hi, I am new to this and thinking to buy this one, what is IR laser used for and do I need it? Thanks
@CorneliusCreations
11 ай бұрын
The S1 is an amazing machine. The IR is used for engraving on metal, plastic, acrylic and stuff like leather. It basically allows you to do stuff the blue light diode won’t allow you too
@goran1504
11 ай бұрын
Thank you @@CorneliusCreations
@WeaponStencils
11 ай бұрын
@@CorneliusCreationsYour video shows you engraving leather with the 40W though. Is the IR just better (cuz the 40W seemed to do really well) or are there different types of leather the 40W won't do?
@lamberthugh8316
4 ай бұрын
@@WeaponStencils Diobe lasers absorb leather better than IR, so they are generally used to engrave leather. As to whether 40W can't engrave different types of leather, this is generally not a special limitation.
@DonaldBachman-ls8rk
9 ай бұрын
Thanks!
@CorneliusCreations
9 ай бұрын
You are too kind! Thank you sir!
@tacoflavoredtoys4870
11 ай бұрын
This has caught my attention
@CorneliusCreations
11 ай бұрын
Mine too!
@diplayball
11 ай бұрын
I used discount code for the $200 off for the S1 but when I go to the checkout it doesn't show it. Has anyone else have this problem?
@CorneliusCreations
11 ай бұрын
I have heard of this before, I’m sure xTool can update your order to reflect the price.
@diplayball
11 ай бұрын
@CorneliusCreations I contacted them and waited for there reply
@CorneliusCreations
11 ай бұрын
Awesome, to confirm, I saw a xTool Facebook rep said hat you can order and they will fix it for you.
@diplayball
11 ай бұрын
@CorneliusCreations Thank you again and I saw just saw the comment in Facebook and luckily I emailed that exact same person. Hopefully I'll hear from them soon
@CorneliusCreations
11 ай бұрын
Hey there, I was notified that the promo code is from 10/22 - 11/22. So it’s not active yet.
@evgenymalm3021
11 ай бұрын
Promo not work
@CorneliusCreations
11 ай бұрын
It starts on the 22nd of this month
@kryczeck
11 ай бұрын
Yes, but on Oct 22nd, the price goes up $200… there’s a countdown on their site showing this. This is so wrong on so many levels, and XTool is pretty much lying and tricking people into making this purchase. Granted, it’s only $200, but the principles behind this type of marketing are just wrong!
@maltesewolf9781
11 ай бұрын
Hello, you should say (if they told you at all) that all the promotions staff is applicable for US ONLY. It does not apply to Europeans it seems. The Air assist and honeycomb are not free at all. For the 20w, the EU price to have these is €1699 ($1800) while for US it's $1599. Thank you but no thank you.
@d.bcooper4480
11 ай бұрын
Thanks for the great video. So buy purchasing the $800 air filter, will this eliminate they need for any additional ventilation ( I’m looking to use this inside of a small room).
@CorneliusCreations
11 ай бұрын
Glad you enjoyed it! The smoke purifier is a great investment for small rooms with no ventilation. I’d you do plan to use constantly I do recommend a ventilation for economical reasons.
@mikiauto73
11 ай бұрын
The 20w is for higher cut precision. It’s not for less power.
@dawnabbott3783
11 ай бұрын
@mikiauto73 So, if I am using the laser to cut image pieces for layered signs would I be best to go with 20w?
@thomasvyvial9874
11 ай бұрын
Laser isn't carving at all. It's for the ones that can't do anything without a machine to do it for them. 😂 it's a joke
Пікірлер: 149