so happy to have this video out in the world ♥️🎞 hope this guide makes it a lot less intimidating to develop color film at home 🥰
@minozemstan
2 жыл бұрын
Linus' charisma is through the roof
@tysaylorphoto
Жыл бұрын
For anyone in the comments here. Most bathrooms can be made into a dark enough space to change your film in. Try it beforehand though to be sure. Stand in your bathroom with the lights off and look for any light leaks around the door and seal it off either with black gaff tape or hand a black blanket/blackout curtains.
@seanc5718
2 жыл бұрын
Yo, thank you guys for actually properly explaining the stabilizer/final rinse thing.
@DixonLu
2 жыл бұрын
One way to prevent cross contamination is to use color tapes. E.g., I use a Blue tape to label the bottle and cap for Blix, and reD for the Developer's bottle and cap. If funnels are involved, I have separate funnels for developer and blix, labeled with red and blue tapes respectively.
@CineStillFilm
2 жыл бұрын
that's a great idea!
@emilytorgalski114
2 жыл бұрын
so smart wow
@emilytorgalski114
2 жыл бұрын
i need to do that!
@IncandescentDaD
2 жыл бұрын
Excellent idea. Perhaps even go further and use diifferent shaped bottles.
@anonymousmcfloppy672
Жыл бұрын
@CineStillFilm The steps when adding the developer and blix into the canister with your film, do you have to be in a dark room?
@ImSimplyAlwaysBored
2 жыл бұрын
Not me watching this when I work in a whole film lab! 😂 love this. My job uses a Fuji processor for c-41. Didn’t know it was this easy to do color film by hand tho. I do black and white by hand there and do love it.
@inkaststudio
2 жыл бұрын
I did not know the developer was so sensitive to blix. Definitely taking more precautions moving forward. Thanks for the heads up! 🙏🏾
@michael_177
11 ай бұрын
Damn. Linus didn't even remove his eye's gaze from the camera as he caught the sliding cinestill developer from across the desk. 👏
@buyaport
2 жыл бұрын
Easiest way to develop color film? True. Nothing more to say. Especially the TCS-1000 makes it so easy and nearly fool proof. Thanks for putting together this solution.
@georgestoichev
2 жыл бұрын
If this is the easiest way I can’t imagine how would look like the hardest way :(
@jlwilliams
2 жыл бұрын
I've processed color neg film before and it was always an incredible PIA, but this almost tempts me to try it again...
@CineStillFilm
2 жыл бұрын
DO IT 😊
@Casualfulltime
2 жыл бұрын
The heater is a game changer
@riorich
Ай бұрын
I remember when Bessler chemicals came out, using 100 degrees, each step of the two chemicals were only 1 minuet each. If you used lower temperatures it could go up to 5 minutes without shifting the colors. When I started with Kodak chemicals, there were 5 chemical steps
@AssataAmani
2 жыл бұрын
Loving how Linus is on the team!!! Amazing video and extremely helpful.
@Moe-ex9lb
2 жыл бұрын
Best video for easy steps about color developing 👍🏻
@geranalogico
2 жыл бұрын
Spanish: tengo una recomendación para el que siga este tutorial. Cuando hagas el revelado y coloques el blix. Ten cuidado si usas tanque como el Patterson. Ya Que bota especié de gases y en mi caso mi tanque explotó Jajaja fue chistoso pero no lo fue tanto limpiar el blix del piso derramado. Pero al final todo salió bien y tengo mis fotos listas !! English ; I have a recommendation for whoever follows this tutorial. When you do the development and put the blix. Be careful if you use a tank like the Patterson. Since I specified gas boot and in my case my tank exploded Hahaha it was funny but it was not so much cleaning the spilled blix from the floor. But in the end everything went well and I have my photos ready !!
@Stoneboy666
2 жыл бұрын
You should let out a little bit of air with patterson tanks. Just put the top on and open it a little bit so air can escape!
@simonmatthee3877
2 жыл бұрын
Hey team, great video, been using the powdered kit for a while now and love it! You mentioned Instagram filters for colour negative film, I couldn't find the link in the description, could you share please, would love to check them out!
@CineStillFilm
2 жыл бұрын
Hey Simon! Thanks for watching. We just added it to our description (whoops!) but you can find it by going to the filters tab on our Instagram profile or this link should work directly too: instagram.com/ar/2747900915465661
@simonmatthee3877
2 жыл бұрын
@@CineStillFilm found it, thanks!
@williamclintonogbebor387
2 жыл бұрын
Thank you so much for making this!!!
@henryIRL
Ай бұрын
Love this video! Super excited to develop my first roll! Double checking: the water should be warmed to specified temperature before any mixing starts? Also, is tap water safe to use or is distilled water the best option? Thanks!
@jenishboricha
2 жыл бұрын
Needed this 👍🏼
@sulmapantoja3531
2 жыл бұрын
Just used this video to develop my first roll! Thank you guys soooo much!
@recipetodelicious5791
Жыл бұрын
Excellent. Just bought the powdered version for my Membership Darkroom (opening in Nov) This will be a hit.
@Stoneboy666
2 жыл бұрын
Thanks for tutorial! I just got the TCS-1000 and color developing kit and was wondering about something; the formula for adding time for reusing is a little bit confusing and would appreciate a little bit better explanation for it. Also you advertise that you can reuse it up to 24 rolls and it seems just tad odd because the instructions say that you can develop 8 rolls of 135 film or 120 film, so is it 24 or 8? 😅 love your products and I will continue to use them but I would hope for more easier instructions! (This could be a language barrier thing too tho..)
@terrywbreedlove
2 жыл бұрын
I think you have enough chemicals to develop 8 rolls the first time. Then you can reuse it up to 24 more rolls before it is spent.
@CineStillFilm
2 жыл бұрын
Hi! The table you are looking at refers to how many rolls you can process in the same tank at the same time. With 1000mL you can process up to 8 rolls of 135 at once, but the chemistry should be able to do 24 rolls over its lifespan. I hope this helps!
@smitty112877
2 жыл бұрын
The directions say to bring the water up to 120° for Dev and 125° for Blix for mixing. Is this necessary for proper chemical activation or just a way to save time bringing the chemicals up to temp prior to developing? I mixed my Dev and Blix with 70° distilled water. Did I screw it up?
@Meteotrance
Жыл бұрын
Lol your tcs 1000 stuff look like a soup mixer machine, well done it warm the water and help mix the chemical without adding bubble truly a usefull tool.
@Betay32
2 жыл бұрын
Developing Neophyte here- does the film's iso determine the developing time/temperature for chemicals? Thank you, and I'm excited to use my new kit from y'all!
@b6983832
2 жыл бұрын
No. In C-41 processing time and temperature are not relative to film speed.
@Fatherrdiff
2 жыл бұрын
Just did my first roll. It’s taking forever to dry
@qhgabriel1
Жыл бұрын
Thank you Linus!
@ashparker444
2 жыл бұрын
How long is the chemistry meant to last? I've done 10 rolls now (with slowly increasing developing time) and no issues. However I've had it over 2 months, should i be disposing soon for the best results? Or will it be ok as long store it carefully? This video was super helpful.. thx :)
@vhfgamer
Жыл бұрын
Around a year... then toss it.
@ed8311
Жыл бұрын
How as your results compared to a lab?
@vaneaauzeac4401
2 жыл бұрын
i don`t recomand using TCS1000 in direct contact with any chemistry
@mrca2004
Жыл бұрын
How much of the final rinse chemical is added to the final rinse water in the tank? Or is it pre mixed in a third bottle and reused?
@30DegreesBank
5 ай бұрын
I have a question, since I didn't quite catch the following part: Do you rinse off the Developer from the tank, before you pour in the Bleach&Fix? I didn't see that in the video. I develop only B&W at home currently, and there I do that for sure. I wash with water in between the Developer and the Fixer, sicne otherwise I am contaminating the Fixer with drops of Developer. Also, do you use and do you have to use Stop Baths - meaning chemicals, that stop the developing process after the 3,5 minutes, or is just removing the chemical enough? Thanks!
@brewstervideoproductions
Жыл бұрын
Good evening. I was wondering what type (names) of chemicals (developer, fixer, etc) I need to develop black & white film and color film. Where to buy them? Also, all the equipment I need to develop everything. Also, chemicals to develop the black & white paper? Thanks.
@chasedionisio
2 жыл бұрын
Do you recommend a stop bath between the developer and the blix? I’d think pouring blix in right after you use the developer would contaminate the blix when you pour it back in the storage bottle. I’m new to this so any feed back would be great
@CineStillFilm
2 жыл бұрын
The Blix is designed such that the Developer getting into it will not contaminate it. As such, there is no need to rinse the film in between the Developer and the Blix. However, be careful not to get Blix into the Developer, as that will kill the Developer. Also you definitely would not want to use a B+W chemical stop bath.
@darkcustomxxx7252
2 жыл бұрын
@@CineStillFilm But warm water would do the trick just like with B&W, or is it so completely unnecessary that the question is academic?
@andrewmattera6205
Жыл бұрын
started developing at home, and i developed four roles with this kit so far, i love it. but i have a lot of Kodachrome, if i run that through, what will the result be? will i get negatives? or positives?
@olorkj
2 жыл бұрын
Fahrenheit and ounces is like a foreign language to 99% of the countries in the world
@tompoynton
2 жыл бұрын
Yeah not measuring and mixing chems in metric seems absolutely nuts to me lol
@odannyboy3338
Жыл бұрын
Just use a conversion chart like the other 1% of us 😉 You have to remember that so many of the inventions that we all take for granted these days were either invented or perfected and built and distributed by American companies from the Industrial Revolution through the late 20th century! No one’s fault, it just is what it is. The US is embracing the metric system more and more, which undoubtedly is easier and more accurate… but change is slow. I still use the imperial system personally, but I understand the metric system and definitely see its benefits! The younger generations especially are using metric more.
@vhfgamer
Жыл бұрын
99% of the world should go to school and learn how to measure properly.
@vhfgamer
Жыл бұрын
@@odannyboy3338 Well this member of the younger generation uses metric for one thing and one thing only. To raise my blood pressure and ruin my day.
@pantac4493
Жыл бұрын
@@vhfgamer guess what the inch was adjusted to fit metric at 2.54 cm not the other way around. So you’re using metric even if you don’t know it lmao
@forthewindell
2 жыл бұрын
Website just says "long shelf life" can someone elaborate on how long these can be expected to be effective once mixed? He does say "several weeks" in the video. I'm just curious about a bit more specific timetable. I guess I should probably just wait until I have quite a few rolls ready to be processed before mixing up the chemistry
@vhfgamer
Жыл бұрын
A year.
@SteveMillerhuntingforfood
2 ай бұрын
I have had my DF96 last more than a year. Kept in a dark container, room temp and removed the air from the storage bottle.
@aabg9019
Жыл бұрын
hey i like ur explanation i just got the full kit, question if I force my film that was 200 iso to 400 iso the timing in developing change ?
@Hipbydesign
2 жыл бұрын
What’s the best way to dispose of the chemicals tho
@4udience0f0ne
2 жыл бұрын
Your local municipality should have a household hazardous waste disposal facility. Some are a simple drop-off. Others you schedule a pickup at your address. These chemicals are no more dangerous than some cleaning products, but it’s always good to follow local regulations regarding disposal.
@darkcustomxxx7252
2 жыл бұрын
with your favourite mixer and ice and have them with dinner.......that's real film hardcore..!!
@javixo1997
2 жыл бұрын
How is this method compared to a traditional method? Is the quality the same?
@DavidWilliams7037A
2 жыл бұрын
Thanks for this! Now I have one favour to ask. Can you please make another video using metric measurements (which most of the world uses!).
@finrisumies6663
Жыл бұрын
So can i reuse the exact same chemicals up to 24 rolls? Right?
@ld4083
Жыл бұрын
What is clean water?
@theren8311
Жыл бұрын
Not sure I caught the name of the sous vide, could you remind me again?
@SteveMillerhuntingforfood
2 ай бұрын
any sous vide will work.
@Casualfulltime
2 жыл бұрын
What is the increase of time for developer? I tend to develop 20 rolls not 24 and had no issues with developing. I’ve never increased dev time.
@Stoneboy666
2 жыл бұрын
I am wondering the same and hoping for an answer. The instruction say add 2% time but then throws in 8% for some reason? Really need answers for this.
@ProfessorEffect
2 жыл бұрын
@@Stoneboy666 Ig its like really 2% for each processed film. So you prob should count your films and lets say you have already processed four films you then need to increase your dev time by 8%(4 films x 2% for each film).
@GurmeetSingh-fr8uo
2 жыл бұрын
How can I develop Portra 400 at home?
@lachlanlau
2 жыл бұрын
Tcs is just a rebadged souvee cooker
@kyleschroeder4801
5 ай бұрын
Is the Stabilizer reusable?
@CineStillFilm
5 ай бұрын
Yes!
@redoni3429
Жыл бұрын
So I only can store the mixed chemicals for a few weeks? What if I rarely develop my own film?
@SteveMillerhuntingforfood
2 ай бұрын
It does last longer, especially the DF96. Just do the snip test to confirm the chemistry is still good.
@StuartWeir
2 жыл бұрын
I rewatched at the 9 second mark multiple times... damn that was smooth! hahaha kzitem.info/news/bejne/xWiC366Ag5SIiYY
@CineStillFilm
2 жыл бұрын
😏
@HntrSvrsn
Жыл бұрын
Linus Film Tips
@39exposures
9 ай бұрын
stand-development in regular chemicals seems to be easier
@randypipper92
Жыл бұрын
Can I develop at the same time 200 and 800 ISO film?
@CineStillFilm
Жыл бұрын
Yes! Any color negative film can be processed together in the same tank at the same time. The only time you'd want to separate and batch things is if you have some film that's been shot normally at box speed and some other film you're intending to push- or pull-process.
@15minoflame
2 жыл бұрын
❤️❤️❤️❤️❤️❤️
@jsollowsphotography
Жыл бұрын
Please include metric temperatures and measurements for your customers in all other countries of the world
@vhfgamer
Жыл бұрын
Negative. Metric can go meter itself into oblivion.
@darrengomes2203
2 жыл бұрын
Could you give metric measurements as well as outdated Imperial ones please?
@henrykeithiii4302
2 жыл бұрын
say anti- microbial 5 times fast
@CineStillFilm
2 жыл бұрын
anti-microbial anti-microbial anti-microbial anti-microbial anti-microbial wow ok never doing that again
@Rsolanzo
2 жыл бұрын
Linus' smile is so infectious
@user-vi3rm5nn5r
5 ай бұрын
need a litre(L) and mL version of this video.
@milkdrinker8616
22 күн бұрын
it's a pretty easy conversion.
@deadheadwill2609
Жыл бұрын
cant stand this guys attitude
@SteveMillerhuntingforfood
2 ай бұрын
My mother always said: If you don't got anything good to say, don't say it.
@RustyTube
Жыл бұрын
You lost me (and most of the world) with ounces and quarts.
@vhfgamer
Жыл бұрын
Use a converter, just like we have to do every time the world tries to shove metric down our throats.
@Jail-Left-Wing-Traitors
3 ай бұрын
What the Fuck is "one quart" ?? 🤷🙄
@soulsicker
Жыл бұрын
If I mix the developer at 51 degrees, how will this affect the results?
Пікірлер: 110