🤗✨ Thanks so much! That’s so sweet of you! Happy Sewing! ✨
@kathypelter8779
6 ай бұрын
Your Fabric is absolutely beautiful. Very nice sewing machine cover too. Thank you for sharing ❤
@kj3d812
2 ай бұрын
NOTE: The measurements for the foam stabilizer side panels are shown as 8", which is the same as the liner and main fabric. However, when stacking the pieces, the foam is shown as being narrower (i.e. does not go edge to edge, the same as the other pieces). I think she forgot to adjust that measurement to 7.5" instead of 8.
@Rosalie2204
6 ай бұрын
Thank you, lovely cover, great instructions 🇨🇦
@luliprint
6 ай бұрын
Thanks so much for Watching! 🌟 Happy Sewing!
@OrsikaNagy-q4p
21 күн бұрын
thank you. just finished this project. great tutorial!
@Stampingerms
4 ай бұрын
Thank you, brilliant tutorial. 😊
@luliprint
4 ай бұрын
Thanks so much for watching! Happy Sewing! 🤗🌟
@joshuastefel1803
Жыл бұрын
This is Very well done. Easy to follow steps. Love the fabric! ⭐️
@luliprint
Жыл бұрын
🤗✨ Thanks so much! Happy Sewing! ✨
@zormier2002
8 ай бұрын
Just beautiful ❤❤❤
@luliprint
8 ай бұрын
Thanks so much for watching ! 🤗✨ Happy Sewing!
@cassandras.2067
4 ай бұрын
Did you include the seam allowance when trying to figure out where the handle hole should go to the top panel?
@luliprint
4 ай бұрын
Hi. Make sure to leave enough space on the top edge. You need to account for your seam alloy when sewing the top panel. Also I added a little extra room on my opening to lift the handle comfortably. Happy sewing!
@hazelmacgregor4355
9 ай бұрын
Thank you, Hazel love this ❤️
@luliprint
9 ай бұрын
Thanks so much for watching! 🤗🌟 Happy Sewing!
@jeannettelee2806
2 ай бұрын
Beautiful ❤
@luliprint
2 ай бұрын
Thanks so much! 🤗
@raggedyanna6-Missy
10 ай бұрын
Hello could you please explain this? You say add 1- 1/2” for seam allowance then say 1/2” for borders? I don’t understand does that mean 2” for seam allowance? Thank you so much
@seausi9253
5 ай бұрын
Your cover is very beautiful and practical. However the processes involved still look very complicated to me as a begginner although I desperately need one right now. I still enjoy watching your podcast very much and you definitely have got talent in sewing. 👍
@dcwatashi
2 ай бұрын
I was thinking of doing French seams instead, and that would save you a step of adding the bias tape? Yes?
@luliprint
2 ай бұрын
This is a Great idea! Thanks for sharing! I will try it on my next cover. Thanks for watching! 🤗
@dcwatashi
2 ай бұрын
@@luliprint hoping to start my project tonight. I have a clear plastic flimsy cover that came with the baby lock so I think I’ll just carefully take it apart and use that for a pattern piece leaving extra room for seam allowance. Or do the French seams
@kj3d812
2 ай бұрын
Is the Bosal foam stabilizer always so crazy expensive? The Amazon link has it selling for $35.44! That seems super expensive, considering Joann currently has Pellon Flex-Foam for $4.99/yd; I bought two yards for $11.98 for this project. Yes, the Pellon is only 20" wide versus Bosal's 58", but I can't justify spending over $35 *just* on interfacing for this project.
@luliprint
2 ай бұрын
Yes, it's pricey, but I'm also a fan of waiting for Joann's sales to snag a few yards at a discount! Thanks for watching!
@cassandras.2067
4 ай бұрын
Hello! I have a quick question if you have a moment. I'm new to sewing and I don't quite understand how you did the measurements. Did you add 1/2 inch to the machine measurements AND a 1/2 inch seam allowance to get the total measurement of your panels? Also one other question. My handle opening might be too close to the edge of my top panel. It's about 3/4 inch away from the edge. Is that too close? Is there anything I can do to fix that? Thank you for the tutorial! I'm excited for this to be my first big project!
@luliprint
4 ай бұрын
Hi Thanks so much for watching. I would add 1 3/4in to your measurements to work comfortably. I used a 3/8” seam allowance and then I finished the borders with a 1/2” seam allowance. So that takes a total of 1 in. So to work comfortably you can add 1 3/4in to your sewing machine measurements. Your handle seems to be too close to the edge. I have another video with a sewing machine cover that has a handle, but not an opening. The handle it’s only to lift the cover alone and not the machine, but I use it all the time in my studio. This is the tutorial: kzitem.info/news/bejne/qGN4zomVZqZ1im0si=v8lkHZLkrjCefPfm Happy Sewing! 🤗🌟
@kristinmcclary7194
2 ай бұрын
@@luliprint Great video, I think there is a lot of confusion on seam allowance of 3/8" and the final top edge stitching on the outside with the 1/2 inch. Is there different terminology for that kind of finishing? I can't wait to make this for my machine and serger. Your fabric is so cute, can get it here in Portugal?
@luliprint
2 ай бұрын
@@kristinmcclary7194 Hi. Thanks for watching. You can search how to sew a French seam that can also work to finish the edges. I’m not sure if spoonflower if shipping internationally. Please check in the following link www.spoonflower.com/en/fabric/11121246-sewing-machine-damask-floral-mirror-love-sewing-by-luli_print Happy Sewing! 🌟
@patriciagriffin3142
7 ай бұрын
Hello, thank you for this great tutorial and the fabric you designed. I am in the middle of making it just as you have described but have had to redo the side pocket. Initially I began sewing the elastic edge cut to the same length as the width of the side piece. But then after sewing the pocket on to the side I realized that the bottom didn’t gather and there would not be the stretch desired. How is this to be done exactly? Should the elastic be shorter and stretched to the size of the mesh? Thanks!
@luliprint
7 ай бұрын
Hi! 👋🏼 Yes. Cut the elastic a little bit shorter and stretch it as you sew it to the mesh. Can’t wait to see your final cover! 👏🏼 You can tag me on instagram @luli.print .Thanks for watching! Happy Sewing! 🪡🤗🌟
@luliprint
7 ай бұрын
Also check minute 32:26 you can see that the elastic is like 1inch shorter than the mesh when I place it right above it before I start clipping it. As I clip the folded elastic to the mesh I stretch my elastic to match the edges.
@zormier2002
8 ай бұрын
That flap needs Velcro in my opinion. My cats would play with it otherwise ❤
@luliprint
8 ай бұрын
That’s a Great idea! Thanks for sharing! ✨
@Albertjonas
7 ай бұрын
beautiful cover! I am properly going to make this one for my new sewingmachine, husqvarna e10, which are my first one! One question, is your needle left positioned when you are sewing? Regards Jonas
@luliprint
7 ай бұрын
Hi! Thanks so much! Yes, the needle is on the left on my standard foot, but I’m Not setting it to move to the left. It’s the standard and default position of the needle when I turn my machine on. I’m using 3/8 in seam allowance.
@Albertjonas
7 ай бұрын
@@luliprint To bad that my sewingmachine can’t set the needle on the left side, only in the middle and right side 😖
@luliprint
7 ай бұрын
@@Albertjonas Hi. I’m using a standard foot and the settings when my sewing machine turns on. I’m. Not moving or setting my needle to sew on the left side. You should be able to leave your needle as is when you sew your other projects. Just make sure you sew with a 3/8in seam allowance. Hope that helps. Happy Sewing! 🤗🌟
@Albertjonas
7 ай бұрын
Ooh thank you! Have a great day! 🙂@@luliprint
@estellamentonis6447
Жыл бұрын
Beautiful cover, do you have a cover for domestic embroidery machine?
@luliprint
Жыл бұрын
Hi! 👋🏼 Thanks so much. I Love getting new ideas and suggestions to use as reference for future videos. I have another sewing machine cover tutorial that you can watch here and adjust the measurements to fit your machine. kzitem.info/news/bejne/qGN4zomVZqZ1im0si=4CPn-OOCGSvr31Is Happy Sewing! 🤗✨
@luliprint
Жыл бұрын
Hi Everyone. Here is the previous Sewing Machine Cover tutorial for your reference. kzitem.info/news/bejne/qGN4zomVZqZ1im0si=ZaKVst6GO_ufnwcb
@raggedyanna6-Missy
10 ай бұрын
I am sorry last question did you cut the bosal foam 1/2” smaller on all sides?
@luliprint
10 ай бұрын
Hi! 👋🏼 Cut the sides 1/2” smaller and the top 1/2” or 3/8” (according to the seam allowance you are going to be using) Don’t cut any at the bottom. That’s going to be your base and you are going to be topstitching right on top of it to give it a nice finish. 🤗
@raggedyanna6-Missy
10 ай бұрын
@@luliprint thank you so much! So if I use 5/8” seam allowance should I add 1 or 1.5 inches to fabric? This is a wonderful video!
@luliprint
10 ай бұрын
@@raggedyanna6-Missy Thanks so much! I recommend you Re watch the segments about cutting your panels. There are slight different measurements for your main panels, lining fabric, and the Bosal stabilizer. I add an extra 1/2” to the overall machine measurements to have room around it and then add the seam allowance that you are going to be using (except at the bottom) Remember that the lining will be 1” longer at the bottom to be able to fold the bottom border. Hope that helps. 🤗
@raggedyanna6-Missy
10 ай бұрын
@@luliprint yes that’s what I meant, I understand everything but how much to add for the seam allowance you say 1-1/2 inches to the machine size, you added an inch, but say 1 to 1 1/2.maybe I will do 1 1/2 to be safe 🙂
@luliprint
10 ай бұрын
@@raggedyanna6-Missy 1 1/2 sounds good , to be safe. Because I rounded up my machine measurements at the beginning to give more room and so it’s not a tight cover.
@raggedyanna6-Missy
10 ай бұрын
Can you use this for a very large machine?
@luliprint
10 ай бұрын
Hi! 👋🏼 Maybe adding some quilting to the panels before sewing them together would give them more structure for a larger cover. Also, I really recommend using the Bosal double sided foam stabilizer because it gives a very nice and sturdy finish. Happy Sewing! 🧵🪡
@juneworth9208
6 ай бұрын
Music annoying had to switch off😔
@luliprint
6 ай бұрын
Sorry to hear that. I made sure to not have any music at all when I’m speaking and giving the details and instructions. You can mute the parts with the music. Happy Sewing! 🤗🌟
@kj3d812
2 ай бұрын
@@luliprint it's still annoying to have to constantly switch between muted/unmuted. Audio is one of the biggest problems with KZitemrs -- too much music, wrong music, too loud music, really bad audio levels between music and speaking sections, etc. (My husband is a professional videographer and has shared his expertise with me, as I sometimes create videos as well.) Learning proper audio for YT videos is well worth any KZitemr's time.
@hannaciechurska3576
4 ай бұрын
WŁĄCZ PROSZĘ DO OPISU JĘZYK POLSKI. NIE MOGĘ SUBSKRYBOWAĆ TWOJEGO KANAŁU BO NIC NIE ROZUMIEM 👎☹️
Пікірлер: 55