I was searching for this type of explanation since yesterday, Every video on nSolve was either too large or too small. you always make the perfect explanation video on all the features of addon. Thank you
@ArtisansofVaul
Ай бұрын
@YazdaniPlays That's very generous of you to say. Thanks so much 😁 It's always a challenge to know how much detail or content to put into a video on such a big addon as nSolve so it's great to know when you've got it right.
@masterxeon1001
Ай бұрын
yay!
@danyarfan5384
Ай бұрын
your not alone, the creator of the addon is doing a bad job marketing and making it ez to get his addon, i always refer to AOV for modeling addons tutorials
@ArtisansofVaul
Ай бұрын
@danyarfan5384 I think everyone will have things they are better at. I can paint models pretty well but I suck at photography to then show them off....
@dcb.creative
Ай бұрын
Great video. You should be recruited by TeamC to create introduction and novice tutorials for all their tools. I had no interest in nSolve before your video, afterwards though I was. Affiliate link utilized. Thanks for all the comprehensible Blender videos.
@ArtisansofVaul
Ай бұрын
@@dcb.creative Thanks so much! That's really kind and a very generous compliment 😁😁😁
@masterxeon1001
Ай бұрын
I am honored by your video! You made nSolve look so good! Im buying a copy! (joke) *adds every complaint to release log* *joins patreon for year*
@masterxeon1001
Ай бұрын
about edit mode. I think that choice is on you. I keep nsolve in edit mode and boxcutter in object and blender respects it. I can't do anything "harder" to that or else i will lock people in. I think machin3 is putting you on select with the selection of face. Tabbing into edit mode is probably the blender way. I'll have to ask lordMachin3 about that.
@masterxeon1001
Ай бұрын
circle rotation is next up. Sorry about that! About circle. The highlight of it is F to match the vert count of face. The goal with the circle is to make the right circle always (same vert size as edges). So the base is still being formed. Sorry about circle rotation. I realized the other day that we goofed. You have a hell of an eye. The F9 discussion was a popular one with selection. In the end I wanted user select to be perfect everytime but the option is for the flexibility is in the nsuite offering.
@masterxeon1001
Ай бұрын
20:18. I need that fixed immediately. You just told me I am "sullying the bevel" which is a dishonor by me. I will have that fixed now. I never want to mess with blender's bevel. I am firm believer in being separate and weird. *apologizes* 23:30 The exploration of the choices. I love that moment. I am obsessed with that moment and its analysis and who is right and who is wrong!
@dcb.creative
Ай бұрын
Yep, they did. I wasn't interested in nSolve until I watched this video. Afterwards, I purchased nSolve with a clear understanding of how it works and how it can aid my workflow. No joke. :-)
@masterxeon1001
Ай бұрын
@@dcb.creative *posts to sales page*
@Leevy27
Ай бұрын
Congrats dude. A very better explanation of the tools as MX101 did. Very useful. Thanks
@ArtisansofVaul
Ай бұрын
@Leevy27 Glad the explanation is clear and easy to follow 😁
@Leevy27
Ай бұрын
@@rationalrama Yup. They made wonderful tools, like BoxCutter and Hardops. Unfortunately, their videos are awful. Just my opinion. I learned a lot more through the videos of the tools made by Artisans of Vaul
@masterxeon1001
Ай бұрын
*cries*
@masterxeon1001
Ай бұрын
@@Leevy27 it's an art!
@Leevy27
Ай бұрын
@masterxeon1001 I know. I'm sure that pros loves your videos, but for the beginners I think there are to much technical information. Artisans of Vaul is explaining the features in a understandable manner. Sorry, just my thoughts. It was not my goal to offend you.
@kevinm3751
Ай бұрын
Super useful tool and I had seen it but glazed over it until now. For me the speed you recorded the tools is just fine. Thanks for the review, it is now part of my toolbox.
@ArtisansofVaul
Ай бұрын
@@kevinm3751 😁👍🏻 Awesome. Hopefully you'll enjoy the upcoming videos on the other tools too!
@kompaktkat
Ай бұрын
Its...beautiful. Highly considering picking these tools up. I'm obsessed with having quad topology and these tools will make my life so much easier.
@ArtisansofVaul
Ай бұрын
@@kompaktkat The other tools are a HUGE boon for creating quad geometry. The videos on those are coming next week 😁👍🏻
@kompaktkat
Ай бұрын
@@ArtisansofVaul Looking forward to it!
@taerog
Ай бұрын
wow, just wow.... thank you! This is amazing! a must have! And the practical examples are extremely useful the more the better!
@ArtisansofVaul
Ай бұрын
@taerog 👍🏻😁 Great to know people are enjoying the video and agree, the addon is awesome. And this is only some of the tools!
@juliaalder2007
Ай бұрын
O my god. I saw your second upload (control modifiers...) and was so deeply desperate, because I was afraid you'll skip nSolve this monday. But yeah, here it is!!! 💃💃💃💃💃 Now we have two reasons to celebrate. 🥳
@ArtisansofVaul
Ай бұрын
Woops, that second video wasn't meant to be up until Friday. I must have messed up on the scheduling in order to get the nSolve video out a bit sooner. Hope you enjoy the video and find it helpful! :D
@juliaalder2007
Ай бұрын
I hope you mess up your schedule more often. 😉 Your videos are always enjoyable and helpful. ☺️
@emmamarx9284
Ай бұрын
Yayyyy!! You’re the best!! Thanks!!
@ArtisansofVaul
Ай бұрын
My pleasure. And you're always taking the time to watch and comment on my videos so I would like to return the "You're the best!!" back at you. It's hugely appreciated 😁
@emmamarx9284
Ай бұрын
@@ArtisansofVaul aww thanks! 😊 your channel is, imho, the BEST resource online for modeling/designing with 3D printing in mind. I haven’t come across anything like your channel so I truly appreciate the time and effort you put into this, it’s been an absolute treasure trove of knowledge and inspiration for me. So genuinely, thank you 🙏
@Blendercage
Ай бұрын
Nice I just bought this yesterday
@ArtisansofVaul
Ай бұрын
Hope the video helps out a bit. A lot more videos on the other tools coming.
@wizendweaver
23 күн бұрын
Purchased via your link. Thank you for the video.
@ArtisansofVaul
23 күн бұрын
Thanks so much wizendweaver, thats really appreciated 😁👌
@richardconway6425
Ай бұрын
A great introduction to a very useful tool set. Perfectly paced, and very instructive. I read the description when this add on first appeared on Blender Market, and it didn't really help very much. It wasn't exactly very clear, but this video has really piqued my interest. I'd really like to try some of these now, like the loop-cut through ngons, hard bevel and offset tool. All really good mesh editing stuff. I'm really liking your matcap and green selection colour scheme btw, that really works well. I'm looking forward to seeing you do more stuff with this toolset, thank you.
@ArtisansofVaul
Ай бұрын
Thanks so much Richard. Lovely to hear the video and addon are of interest and clear to listen to 😁😁😁
@9b8ll
Ай бұрын
Thank you so much for this vid. This is so worth the 23 buck. One thing that I love about this tool is the multi join in Nsolve. It save time. I talked to mx2, and I really hope for a multi edge slide soon. The edge slide only slides one edge at a time in nSolve.
@ArtisansofVaul
Ай бұрын
@9b8ll Totally agree on all counts and thanks so much 😁👍🏻
@khalatelomara
28 күн бұрын
Very concise and nice video , of course it is excellent modeling addon and the tools are time savers but I prefer always to work with addons that doesn't affect my original workflow so it doesn't affect my muscle memory specially I was a former 3ds max user , specially that addons in sometime it becomes obselete or a new paradigm kills it like an update for bevel function in blender itself and better remeshing , that will make these tools something from the past and blender is very quickly updating
@ArtisansofVaul
28 күн бұрын
While I agree in a way won't that always keep you behind on the fastest way to work? We need to learn new workflows as new possibilities become more efficient? For example if this is the new paradigm (this is the created of Hard Ops and Boxcutter, some of the most popular addons for use in Blender after all) you're missing out on it?
@mr.sandman1217
29 күн бұрын
This addon is a game changer! I hotkeyed nsolve to Ctrl+Tab in both object and mesh mode so I don't have to enter mesh mode and then hit the nsolve icon.
@ArtisansofVaul
29 күн бұрын
Oh cunning. I like that a lot.
@mr.sandman1217
28 күн бұрын
@@ArtisansofVaul In Object mode you have to CTRL+TAB and click the object to enter into nSolve, CTRL+TAB while already in the edit mode works as intended. Another really handy hotkey is ALT+Q. if you need to switch to a different object, instead of exiting edit mode and selecting the new object. hover over the object and press ALT+Q while in edit mode. this works both in edit mode and in sculpt mode.
@waberoid
29 күн бұрын
This reminds me of something like Hardops/Boxcutter
@ArtisansofVaul
29 күн бұрын
@waberoid It's made by the same creator. What I really like is that there isn't an overlap with HOps or Boxcutter where you double up on tools, instead they really compliment each other for when you want to move from one stages of modelling to the next.
@waberoid
28 күн бұрын
@ArtisansofVaul Reeeealy!? Well maybe that's enough to convince me lol
@ArtisansofVaul
27 күн бұрын
@@waberoid Haha. Its exactly the thing that convinced me as well.
@2011manbeast
22 күн бұрын
I just got this. Maybe it's in the preferences, but I don't have an option to show both Nsolve and Nsuite in the viewport at the same time.
@ArtisansofVaul
22 күн бұрын
@2011manbeast 👍🏻 Open nSolve in an edit mode. Press D to open the helper and then turn on the eye icon for nSuite that's there. Then you get both 👍🏻
@WiseOakDakota
Ай бұрын
Great new tools and a great video explaining them, thank you! Can I ask a general question about HardOps/ Boxcutter since I've been trying to learn them with your tutorials? I don't plan on using my models for 3D printing at all, but definitely for exporting to things like Unreal and for video creation in Blender itself, are boolean cutters the best way to go for things like that (at least where hard surface objects are concerned)?
@ArtisansofVaul
Ай бұрын
@WiseOakDakota Cheers. So for most game engines you will need quad geometry or triangles. Some will work fine as you can just add a triangulate modifier and you're all set. For those this doesn't work for something like nSolve is going to be a total blessing as you can get everything applied and fixed more quickly.
@WiseOakDakota
Ай бұрын
@@ArtisansofVaul i definitely marked Nsolve as my next pickup, I’ve been doing a lot of tutorial learning and am trying to master modeling before moving on to things like materials, animation etc. So you’re saying use boxcutter/ hard ops for the modeling and then use Nsolve/ suite tools when it comes time for retopology? Or just use the N tools instead of Boxcutter
@ArtisansofVaul
Ай бұрын
@@WiseOakDakota Use Hard Ops/Boxcutter for the modelling and then clean up with nSolve. There is also now a free toolset called nd thats really good (especially for something thats free) but it's not got as much to it as Hard Ops and Hard Ops works better with boxcutter. kzitem.info/news/bejne/pKyes4B_gqRiano
@yar3613
27 күн бұрын
Is it possible to add hotkey for each function in Nsolve? i hate mouse clicking , i prefer hotkeys or pie menu
@ArtisansofVaul
27 күн бұрын
@yar3613 I'm going to do a video on this. Yes and more so! If you look in the top left you can see you can custom set tasks to keys but there is also part of it called nFlow where you can make whole profiles of shortcuts for what you want and even add in other functions not part of nSolve. It's amazing. Almost like you program the best parts from different addons!
@hdduong4221
27 күн бұрын
I have one silly question. Is Click and Drag function to weld nearest vertex in Nsolve? Thanks
@ArtisansofVaul
27 күн бұрын
@hdduong4221 So that's one of the tools on nSolve (not covered in this video but next week) were you can drag to merge. You can also (and this is amazing) do a merge by distance from an individual vertex really easily, it's called the collapse tool and it's bloody brilliant
@hdduong4221
27 күн бұрын
@@ArtisansofVaul Thank you for your sharing. So much interesting things.
@sherlockhomes9919
29 күн бұрын
Looks cool! But hows the performance with production models around 100k polys and up? Is it sluggish then?
@ArtisansofVaul
29 күн бұрын
Ive only tried it on a model at just under 600k faces (an STL I had downloaded) and it had a very slight decrease in speed compared to a simple model but not very much at all, and exactly the same as using a standard Blender tool like merge or edge slide.
@sherlockhomes9919
29 күн бұрын
@@ArtisansofVaul good to hear. I will be buying it then. The "hard" toolset is extremely useful.
@ArtisansofVaul
29 күн бұрын
@sherlockhomes9919 Do let me know if you find a "breaking point". As I say I haven't yet but it will vary from computer to computer and the complexity of the task.
@francoislozach866
19 күн бұрын
Hi … excellent videos series.. I am back to your first one to ask something… how do you change the size of the icons… find them very small and did. Or find a way to get the tool bar bigger… any thought on that please? Thanks
@ArtisansofVaul
19 күн бұрын
@francoislozach866 I will have a video on customising a lot of this as nSolve is REALLY customisable. But for now: click and hold on the rectangle that let's you drag the tools around, while holding down hold "s" and drag to the right.
@francoislozach866
12 күн бұрын
@@ArtisansofVaulexcellent and I just see that also on your last video… as usual very informative clear and nice to watch!! Excellent Chanel and fantastic work from you!! Thank you so much
@ArtisansofVaul
12 күн бұрын
@@francoislozach866 My pleasure.
@WillValentino
27 күн бұрын
Collapse Vertex? Is that an addon or something? How can I enable it?
@ArtisansofVaul
27 күн бұрын
@WillValentino It's also part of nSolve. NSolve contains three tool sets, nSolve, nSuite and nFlow. It was too big to do one video on so all the nSolve tools will be covered next week (including the collapse tool).
@WillValentino
26 күн бұрын
@@ArtisansofVaul Thanks AoV, keep up the good work!
@Bluejohn
25 күн бұрын
How do I get both menus to come up, I can only seem to get one ?
@ArtisansofVaul
25 күн бұрын
@Bluejohn I will cover this specifically. But open nSolve specifically when you're in edit mode. Then press D and in the helper menu add nSuite but clicking the eye icon next to it. Hope that helps.
@Bluejohn
24 күн бұрын
@@ArtisansofVaul Thanks AV. So simple when you know how
@crimso1313
Ай бұрын
how to make icons as big as yours?
@ArtisansofVaul
Ай бұрын
I will cover this in a later video to show how but hopefully this will be a clear enough explanation. For each set of tools there is a rectangle you can click and hold to move it. Click and hold that (check its moveable to know you have got this right) then hold down "s" while still holding down the mouse button and drag to the side and it will change the size.
@crimso1313
Ай бұрын
@@ArtisansofVaul Thank you. everything worked out
@eitantal726
Ай бұрын
Other than hard bevel, everything else is basically enhancements on knife tool
@eitantal726
Ай бұрын
basically knife tool, loopcut, bevel but with *fewer* steps :)
@ArtisansofVaul
Ай бұрын
@eitantal726 I think that's a bit of a simplification but that they are all "there" without hot keys is going to be a maddove boon to many. Personally I will probably remove some of the options as I'm so used to the hot keys and keep the ones I'm not used to or don't work with hotkeys. I really love how customisable this is (I'll do a video on that). Also it's important to mention this isn't even half the tools. It's got so many I had to break it down 😅
@eitantal726
Ай бұрын
@@ArtisansofVaul I was about to comment "There's nothing new under the sun", until I got to see the hard-bevel. Apparently there IS new under the sun
Пікірлер: 90