Looos good. I have the h6 can you screen shot your sim racing settings please
@GYGOtv
Ай бұрын
Sure thing, here you go. Please keep in mind that right now they are not quite where I want them so check back again later for more finalized settings. You can find a screenshot of the settings here drive.google.com/file/d/1YMwUcAvOw1rje6B2ilo02Ibl4Z7slxNS/view?usp=sharing
@kangjames2492
Ай бұрын
@@GYGOtv Hey buddy, I see your in th crystal today. I'm trying to set this up know. Any tips?
@GYGOtv
Ай бұрын
@@kangjames2492 I've been having some issues with the headset battery draining lately but working it out I hope. Make sure you use the Pimax Hub to plug both USB's in and that seems to be the best solution so far. I'm torn on the Crystal right now... it pisses me off on a regular basis but then once I get it working... the visuals are amazing. I guess that is kind of the Pimax Experience in a nutshell. Let me know if you have any specific issues you run into and I'll try to help.
@kangjames2492
Ай бұрын
@GYGOtv My crystal has been rock solid. I actually pre ordered the Super, and im anticipating the bigger for and smaller size with no battery. The battery has Ben a little issue because it seem to go dead at the wrong times. I guess it's value will br realized I need they release the Ygig.... I just figured out how to get my rig moving with mechwarrior 5 after trying all night lastninght.
@GYGOtv
Ай бұрын
@@kangjames2492 Ya the Crystal is great until it isn't. God Help You if you need Pimax Tech support... absolute garbage with the hoops they make you jump through. I'm just hoping another company comes out with something because I'm sick of my Pimax but can't beat the visuals right now. Again, no plans to buy another headset unless it is OLED with Aspheric lenses (unless Somnium really can produce Black/Blacks without blooming on their local dimming, we will see). Hope your Crystal gives you a lifetime of good service so you can just enjoy it and not have to mess with Pimax tech support!
@PoorYurik
Ай бұрын
Awesome to see you trying this out as well. Thanks to Limitless VR, I also (mostly) got it all working with my H3, VPForce Rhino, Buttkicker, Jetseat, etc. too. But you are absolutely right -- the HOTAS implementation is a total nightmare. The Remap config file didn’t work with my Rhino so I went the x360 gamepad emulator route. However, anything that moves the virtual leftstick on the gamepad (my throttle or pedals) causes a constant rapidfire beeping noise as if I'm rapidly scrolling thru the MW5 menus, even when I'm on my mech. Limitless VR has the same issue, but only in the main menu. Very game-breaking, hoping to figure out a workaround soon because everything else is fantastic.
@GYGOtv
Ай бұрын
Yep, I can't believe a game was released with this bad of HOTAS/Joystick Support! I'm still tweaking my settings too trying to get everything to feel right. I did link a document and Reddit thread in the description that might help if you haven't seen it. The biggest thing I'd like to change is the Torso Twist to be 1 to 1 with the Rudder Position. Right now pressing a rudder just moves the Torso but when you release the rudder the torso stays where you put it. Back in the old days the torso would key off the rudder position which really helped you not be twisted when you didn't want to. I'll keep working on it but it certainly could be better. Still pretty amazing even with all the bugs! Thanks for watching.
@Washing_Dirt_Prospecting
Ай бұрын
I saw that other vid of the dude in his big rig. His rig really accentuated the stepping motion. It was pretty cool. I've been playing mech warrior 5 for a while.
@GYGOtv
Ай бұрын
Well you know where you can come take it for a spin if you want to :) Do you play in VR? It's pretty cool and hopefully it will work just as well in the new Clans version.
@Washing_Dirt_Prospecting
Ай бұрын
No thank you, no and I've yet to finish the campaign before thinking about an expansion. Having played the excellent Battletech before this, it is really a fps retread of the turn based video game. Still fun, but been there, done that. I still jump in once in a while.
@LimitlessHorizonVRSimrigs
Ай бұрын
Hey all, I'm so thrilled to see everyone getting this up and running or attempting to get it working. Keep going. it's worth the effort. Thanks so much for the kind words and support for my new channel. Awesome to see another video up on KZitem with this working, its so epic 😁
@GYGOtv
Ай бұрын
Introducing the man who made this all possible Ladies and Gentlemen!!! Thanks for swinging by the channel, without your help I wouldn't have even known this was possible. I am forever in your debt kind sir! EVERYONE please make sure to go to Limitless' Channel and Subscribe, he deserves it!
@carniv0rous
Ай бұрын
U know this is just in time... i was meaning to ask in the facebook group whether anyone tried mechwarrior 5 with vr and their h6. And u have come to the reacue just in time.
@GYGOtv
Ай бұрын
LOL, it is so funny because Darrell (the Master Fabricator) and I had just talked about how cool the motion would be in Mechwarrior a few weeks ago... and then here it is. I've got to thank Limitless VR because I wouldn't have known about it without his video!
@knowyourjoe8826
Ай бұрын
WOW... Big statement there ! " Worse than the 90's." I vividly remember those days. It looks super cool and watching that h6 makes me think of the possible immersion. Dang. Looks like this will be on the check list pretty soon for me. Looking forward to it. I think... LOL. worse than the 90's??? Oh well I survived that once before... Thanks for sharing.
@GYGOtv
Ай бұрын
In the 90s I NEVER had to look up the Hardware ID's to get the Joystick to work! This was a first for me on that for sure. It is ridiculous how bad their Joystick Implementation is for this game... The Irony is, your Avatar in the Mech is actually using a HOTAS LOL (Jeff Weaver pointed that one out to me)! Thanks for watching.
@counterdebate
Ай бұрын
Amazing that this can be a home setup nowadays 😍
@GYGOtv
Ай бұрын
I know, sometimes I jump in it and it feels like I'm on a ride at Disney Land... Except I don't have to get out and I didn't wait 4 hours in line to ride it :) Technology is a wonderful thing! Thanks for the comment.
@horndogfred5246
Ай бұрын
This is absolutely amazing. The problem i have with mech warrior 5 is the unrealistic amount of enemy crap they throw at you and expect you to make it. No lance in history has killed so many mechs and tanks in a single battle by themselves.
@GYGOtv
Ай бұрын
@@horndogfred5246Thanks for the comment. I'm still learning all that, just doing instant action until I get the controls dialed in... I assume the campaign isn't any better?
@nickmhc
Ай бұрын
Dude. I remember having such a hard time getting the old Saitek X52 to work with MechWarrior 4. The mode button registered as always-pressed, which made key mapping a pain. But having the rudder control on throttle to rotate the Mech and enough buttons for as many weapon groups as you could ever want was a dream
@GYGOtv
Ай бұрын
Yes, lots of button mapping, but Mech 5 does not make it easy for sure. Still trying to figure out how to make the torso twist 1 to 1 with the rudders but no luck yet. Thanks for watching.
@gopherchucksgamingnstuff2263
Ай бұрын
This reminds me of Virtu-on, An old side-by-side Mech battle game at arcades.
@GYGOtv
Ай бұрын
Did those have Motion? I was only familiar with the the Battletech Pods.
@gopherchucksgamingnstuff2263
Ай бұрын
@@GYGOtv No, it didn't have motion, just a divider to keep you separate from your friend. It 25 years ago. Afterburner had motion.
@gopherchucksgamingnstuff2263
Ай бұрын
@@GYGOtv This is the game without the divider. kzitem.info/news/bejne/lI9quqFjo6uViaAsi=JW6DtbVD6n_J-GXx
@GYGOtv
Ай бұрын
@@gopherchucksgamingnstuff2263 Amazing how all this technology can now be in your home! I guess good things to come to those who wait :) Thanks for the comment.
@Z1pZ1p3r
Ай бұрын
If it looks that good already in Mercenaries 5. Imagine how devine it will be in Clans.
@GYGOtv
Ай бұрын
Yes, and I'm hoping they make the HOTAS programing a little easier too. I'm looking forward to Clans, that will be more like the original Mech 2 vs. Mercenaries I think. Thanks for the comment.
@merkarion7883
Ай бұрын
Now to this Experience you need a Heater that reacts according with your Heatlevel and maybe the smell of heated Electronics...than you have a "Real" Experience^^
@GYGOtv
Ай бұрын
LOL, ya and don't the pilots in the Lore drive in their underwear or something like that? I'd have to start an Only Fans Page for that I guess :)
@merkarion7883
Ай бұрын
@@GYGOtv In Classic true...but with the Helm Memory Core they were able to recreate Cooling-Suits...so that should be ok for Streaming^^. Ok after each Game a Shower is needed 🥵🥵🥵🤣🤣🤣
@GYGOtv
Ай бұрын
@@merkarion7883 LOL, great to have mech enthusiasts here to keep me honest! :)
@TikTokBattleTech
Ай бұрын
It's amazing fun in VR alone. If you MechWarriors out there also want a fine wine BattleTech experience, check us out! Live virtual table-top BattleTech and Virtual Mechwarrior:Destiny of War TTRP campaign.
@GYGOtv
Ай бұрын
Thanks for the tips!
@infographistehistorichaiti5929
Ай бұрын
Oooh man, this looks like so much fun.
@GYGOtv
Ай бұрын
@@infographistehistorichaiti5929 It has been a blast... Not sure if the VR or The Motion is my favorite... But the good thing is I don't have to choose and can keep playing with both :). Thanks for watching!
@elserpiente98601
15 күн бұрын
Wow!!! Amazing!!!
@GYGOtv
15 күн бұрын
Thanks... it is a dream come true for us Mech Fans for sure! Thanks for watching!
@s3any1977
Ай бұрын
As a man who plays MW5 a lot, I WANT ONE
@GYGOtv
Ай бұрын
Yes you do!!!! It feels so real and realistically is at least somewhat affordable when compared to other motion options... like building a real life Mech :) Let me know if you have any questions and thanks for the comment.
@Dyne-uy2yy
Ай бұрын
How did you get the joysticks to bind i have 2 virpl constilations and waa unable to get them both working in this game
@GYGOtv
Ай бұрын
It is complicated as hell... you have to find the Device Hardware ID's and put them in a config file to get things to work. There is detailed instructions in the description both a reddit link and a document on the issue. Hope they help.
@KnightwingSims
Ай бұрын
I spent last weekend trying to get everything working for this. I'm very close, I think, but i don't like the hotas settings yet and I still have some bugs to work out. The taste I got was amazing though.
@GYGOtv
Ай бұрын
Agreed! I really want to dial in the Yaw/Torso movement and would like to have it go 1 to 1 with the rotation of the rudder pedals. But I got it close enough to enjoy it for awhile at least. Thanks for watching.
@AQUARIUMFREAK123
7 күн бұрын
Maybe they will make a MW6 and get their configurations for VR and the motion chairs together made EASY.
@GYGOtv
7 күн бұрын
Well we can certainly hope! I'm still kind of hoping they improve it in Clans too, but I'm sure they are probably just using the same engine as MW5. Thanks for watching.
@Chaos8282
Ай бұрын
Wow that looks like fun.
@GYGOtv
Ай бұрын
Yep it is a dream come true ever since my Mech2 days. Thanks for watching and the comment.
@JamesPery
Ай бұрын
I really want to love Mechwarrior 5 because I love Battletech. Maybe i need to just fix everything with mods because the game is just unplayable otherwise. This gameplay looks like exactly what I want but my time with the game has been pain!
@GYGOtv
Ай бұрын
Amen to that... I spent most of the time trying to get the controls to work and still not exactly what I wanted. The good news is it does look like the community has stepped up and there are plenty of mods out there to make things better. It is a lot of work for sure, but if you love this franchise, I think it would be worth it for most. Good luck and I hope you get yours up and running where you like it.
@cyrilgpilot
Ай бұрын
MechWarrior on a H6, wow, what a dream! 🤩 I finally have enough money to buy a "little" H3 🎉 Any news from Igor for a release date of rigs with new motors?
@GYGOtv
Ай бұрын
I bet this is still pretty cool in an H3!!! I'm trying to schedule another Livestream with Igor but he has been busy. Last I heard they thought sometime in August might be the timeframe for the new motor setup and then before the end of the year for the retro-fit gearboxes for older units. Not sure if that is still the case but hopefully will be able to talk to Igor soon to get an updated answer. Thanks for watching and congrats on your soon to have H3!
@cyrilgpilot
Ай бұрын
@@GYGOtv Heave will always be a great feature for flightsim and also MechWarrior 😋 On star wars squadrons I guess it's Amazing. Yes I saw his interview on the simexpo and I will be his first client in August (🤞) with the new motors. It will be great to have him in the next Livestream, I think a lot of flight simmers are waiting for this upgrade. See you soon
@GYGOtv
Ай бұрын
@@cyrilgpilot Agreed, I know they were doing testing on the Retro-Fit deal and I'm curious how that went. I can tell you after using the H3 at FSExpo, that is a heck of a machine for the price and I was really impressed with the motion I felt out of it. To me the H3 is a no-brainer decision for those on a budget and who want to take their sim experience to the next level!
@cyrilgpilot
Ай бұрын
@@GYGOtv if even a H6 user say that, no doubt I will totally love it!
@GYGOtv
Ай бұрын
@@cyrilgpilot Ya I was mostly skeptical about losing the Heave but I was able to tune the one at the Expo so you could still feel that effect even though the H3 doesn't technically have heave... it was still simulated which was cool. Plus the range of motion is a little more on the H3 so you get that benefit as well. I would recommend getting a buttkicker or other transducer for it... it made a ton of difference in the overall experience and was a great addition to the immersion.
@WOojerVest3andQuest3onMe
Ай бұрын
Wow, just watching your rig bounce up and down I can already tell how immersive this must feel. Is this game Native VR supported or do you have to do some injections or modifications…? I want to get this game now! Looks Awesome!
@GYGOtv
Ай бұрын
This game is a PAIN IN THE ASS to get working :) I recommend the links in the description to get a full idea of what it takes... and yes Unreal Engine VR Injector is what made this possible and I can't imagine not running it in VR... simply amazing! If you do decide to add motion, I have a code that will save you 5% if that helps. It is on the game screens and at the end of the video. Thanks for watching.
@wittyname-sy5je
Ай бұрын
I had heard it was possible to play MW5 in VR but I didn't know there was motion platform integration for it. That looks amazing. Really trying to upsell me on the H6 there. Oh by the way, I know it's still early but have you heard anything new from Igor about the upgraded motors?
@GYGOtv
Ай бұрын
The H6 is pretty Awesome! Almost like it was made for this game :) Nothing official from Igor yet, trying to get another Livestream scheduled with him soon so we can get an update. Stay tuned!
@Atlessa
Ай бұрын
How do you make it VR? I know of two methods and the both have trouble with the zoom window, but yours looks perfect. Edit: Lol, should have finished the video before commenting. :D
@GYGOtv
Ай бұрын
No problem... I assume you got the VR instructions from the link in the description?
@CRAZYHORSE19682003
Ай бұрын
I don't have a motion rig but I do have VR, so I will buy this game.
@GYGOtv
Ай бұрын
Mech5 Looks Amazing in VR!!! Highly recommended... just have someone in your house constantly bump the chair you are sitting in and you'll get similar results :) Thanks for watching.
@CRAZYHORSE19682003
Ай бұрын
@@GYGOtv LOL I have a buttkicker and it works great in VR for Microsoft Flight Simulator.
@richardPalmisano
Ай бұрын
Awesome my brother as always maybe this might be a stupid question lol but how about unreal engine with msfs or is that even a thing for msfs. Ok buddy have a great weekend my brother
@GYGOtv
Ай бұрын
If it's Unreal Engine the VR Injector should work. I don't think msfs is Unreal however but might be wrong. Not sure you would want to go back to that with MSFS2024 on the horizon, looks like it has missions and stuff that MSFS had as well. Thanks for watching.
@frederikjoubert5533
Ай бұрын
Awesome rig! What are the mounts you use for the wind sim? Thanks!
@GYGOtv
25 күн бұрын
Hi frederik, sorry for the delayed response... this one snuck by my notifications and I just caught it on my "latest comments" page. I talk about the wind mounts here... kzitem.info/news/bejne/26J9t2eEmGN9dJw If you have any other questions please let me know and thanks for watching!
@FullMetal-Tech
Ай бұрын
To bad they didn't implement crosshair gimble, so your weapons would move where you look within the gimble limits. This has been a thing since mechwarrior 2 but only with the mouse. Hope they can do that eventually.
@GYGOtv
Ай бұрын
There is SO MUCH on the controls I wish they did better. You can tell they didn't have simmers in mind when they developed this game, otherwise they wouldn't have skimped on the VR. We will see if Clans is any better but my guess is it will use the same engine and probably have the same control limitations. Time will tell, thanks for watching!
@adrian2911
Ай бұрын
They absolutely implemented this in the VR mod seen here. It's under head aim in the mods settings and is on by default
@FullMetal-Tech
Ай бұрын
@@adrian2911 I saw that when i looked up the mod and was happy to see it.
@GYGOtv
Ай бұрын
@@adrian2911 Cool, I'll check it out... Still learning all this stuff so thanks for the tip!
@DomeDweller
Ай бұрын
Wow!
@GYGOtv
Ай бұрын
@@DomeDweller Yep, it is Awesome. Thanks for watching!
@DomeDweller
Ай бұрын
@@GYGOtv I want one. I'm sure that setup costs more than my next vacation.
@GYGOtv
Ай бұрын
@DomeDweller surprisingly more affordable than you might think! Check this video out... It shows how the DOF compares to other platforms! kzitem.info/news/bejne/z7CjuK58cIuCdXYsi=ByDdrJDuGGgVpjP6 You could totally start with a H2 just to get some motion in your life and build from there. Let me know if you have any questions, I'm happy to help!
@DomeDweller
Ай бұрын
@@GYGOtv I'll check it out.
@gloeckle
Ай бұрын
Nice job! total cost?
@GYGOtv
Ай бұрын
H6 Motion Platform currently $7500, Seat and HOTAS about $1000, Pimax Crystal $1500, Computer to run it all $3000, Experience It Delivers... Priceless!!! Also you could do it for much less with the H3, cheaper HOTAS and a Quest 3 if you wanted to. Thanks for the question.
@iconcity
Ай бұрын
Ok watching NOW - Please tell me you have a 'How to' with the Mechwarrior 5 !!!
@GYGOtv
Ай бұрын
No, just go to Limitless VR's video linked in the description... He talks all about "How To" set this all up. Thanks for watching!
@WarriorShao
28 күн бұрын
Are you using any bass shakers? If yes what program you use to control the shakers?
@GYGOtv
28 күн бұрын
Yes, I just have an old Buttkicker Gamer 2... I run it directly from the soundcard and only use the audio from the game. Too many games don't have all the telemetry and stuff to be consistent to use telemetry for my Buttkicker so I prefer to do it this way to keep it simple. I know I'm giving up a lot of effects, but honestly I mostly use it to get the engine rumble to mask the cogging of the H6 and then to enjoy the big explosion effects and stuff like that so I'm happy with it like this. Thanks for the question.
@WarriorShao
26 күн бұрын
@@GYGOtv Your set up is GOD bro. Ima try the shakers this weekend. I guess there is no telemetry as you said. I was hoping you had found a way.
@GYGOtv
26 күн бұрын
@@WarriorShao Well thank you, I know my setup is "Fire" right??? Did I use that word correctly (askes the Gen Xer)? Anyway I talked to Jeff Weaver and he said he had to use sound too on Mech Warrior so No Audio Telemetry is confirmed. You'll love what the shakers add, even if it is just a mirror of the game audio. Thanks for watching.
@franciscojmunoz3938
21 күн бұрын
Hi, thanks for your video. Could you comment on motion compensation ? do you have it on? what method do you use? I've got oredered my h6 past week and I am trying to prepare everything that I can for the moment this toy arrives home.. and motion compensation recommendations in h6 is the main topic that I haven't seen on your videos...thanks
@GYGOtv
21 күн бұрын
Hello francisco, first off thank you for watching our channel... I hope you will enjoy your H6 as much as I have enjoyed mine. So this is actually a bit more complicated than just pointing you toward a part (one of the reasons my video on this topic gets pushed back because there are just so many factors). Anyway, the first question I have for you is what VR Headset are you using, and is it Lighthouse Tracked or Inside Out? Second are you using a transducer like a Buttkicker or anything. Let me know about these things and I can help you a bit more. Thanks and I look forward to hearing back from you.
@franciscojmunoz3938
21 күн бұрын
@@GYGOtv well, I have g2 as my first option, although I have q3 and a psvr2 with pc adapter…so all of them are inside out, I have read pretty much about openvr motion compensation and openxr.. so ai think I know the options available, so to be more precise in my question, what I wanted to know is if you use motion compensation first of all, and the second doubt is if the wittmotion with the srs virtual tracker would work fine on this 6dof (knowing that that device only reads 3 axes). Tomme the openvr motion compensation seems the more logical but I don’t know where and how I would place the hpg2 controller in the h6, and if the vibrations could be a real problem…thanks
@GYGOtv
21 күн бұрын
@@franciscojmunoz3938 thanks for the feedback, and yes I absolutely use Motion Compensation! I can't really fly without it now as I notice how bad I move around (especially during a catapult launch). I personally use a physical Vive Wand as a tracker mounted to the back of my seat (by my head) and use that to cancel out the motion. Unfortunately, realistically your only real option is the Witmotion if you are doing inside out tracking on the headset. Trying to use an inside out controller is theoretically possible BUT it has to be mounted in front of the headset so it can see it and if you turn your head and the controller goes out of sight then you might get some weird results. I tested my Crystal with this method before I got my lighthouse faceplate and it wasn't good at all. On the other hand, the problem with the Witmotion method is that according to our testing it only compensates for pitch and roll (not even all 3 axis the sensor has)... that means all the heave and surge/sway movement are going to still be there (ie the catapult launch). Unfortunately if you want to compensate all 6 axis, you will probably need to switch to lighthouse based tracking like I use. The issue with that is it is very susceptible to vibrations like you mention, so if you are going to use a Buttkicker you will need to build a mount to absorb that vibration. If you decide you want to go this direction, email me (GYGOmail@gmail.com) and I'll send you some photos of the mount I came up with. The design absorbs about 90% of the vibration and then I use the software to filter out about 8% more (still have some slight vibration on mine but it is ok because it kind of simulates airframe shake when you are doing extreme stuff). Anyway I hope that helps and please let me know if you have any other questions I can help you out with. Good Luck, I think you are going to love this experience.
@franciscojmunoz3938
20 күн бұрын
Thank you very much for your extensive and detailed response. Well , then I will try to use the g2 controller mounted in some way near the wheel, don't know how or where exactly until I get my h6 at home. Any ideas on this are really welcome. I suppose that to use a lighthouse tracking i must change my headset ..or can it be achieved combining different headsets and controllers?
@GYGOtv
20 күн бұрын
@@franciscojmunoz3938 Yes you would need a different headset. I've actually been working on a Motion Compensation video for awhile now and might have a different solution that might be better for you but I need to test it a bit more before I go public with it. Please send me an email and I'll let you know what parts you would be looking at to make it work instead of lighthouses.
@robertstewart9989
Ай бұрын
Catapult!
@GYGOtv
Ай бұрын
I Love this Mech... it was the one I always played in Mech Warrior 2! Probably because it was on the cover if I remember correctly.
@robertstewart9989
Ай бұрын
@GYGOtv Cats are my go to in MWO
@GYGOtv
Ай бұрын
@@robertstewart9989 I know, just something so cool about them! I'm trying to try other mechs too... but I keep coming back to the Cat. Any recommendations on a different Mech to take for a test drive?
@robertstewart9989
Ай бұрын
@@GYGOtv Sun Spider
@VDVrEquipment
Ай бұрын
How would this work in a h3 or h2 or do you need a 6?
@GYGOtv
Ай бұрын
I know it works as Jeff Weaver is testing it on his H3. I'd imagine it rocks and pitches to simulate the heave but don't know for sure. I'll ask if he can let us know how the H3 feels.
@VDVrEquipment
Ай бұрын
@@GYGOtv Yeah cause that looked cool.
@Thiniking
29 күн бұрын
Price?
@GYGOtv
28 күн бұрын
You can get into motion for as low as $2400... my H6 now days looks like it's about $7500 or so. Still the best value when you compare it to other motion options in the market. Thanks for the question.
@TrooperManaic
29 күн бұрын
Do you have a discord. I would like to ask you an import question in a private message @get your game on.
@GYGOtv
28 күн бұрын
Yes, discord.com/invite/xpAJmXx3AP it is also in the about section on the KZitem main page. You might be better to email me at GYGOmail@gmail.com... I tend to look at it more than I look at my Discord. Thanks for watching.
Пікірлер: 119