#hondashadow #hondamotorcycles #motorcyclerepair
Hello KZitem viewers, and welcome to my channel. This video shows you how to disassemble carburetors from a 2003 Honda Shadow 1100. As with all my videos, all steps are shown, and I explain the steps throughout the video. Also, I have included time stamps below to help you find a particular step in the video.
1. From 00:00 to 00:11 is the introduction to the video.
All the parts from steps one to thirteen pertain to the left carburetor. Also, step fourteen shows the carburetors being separated.
2. From 00:12 to 00:54, the fuel is drained from the carburetors.
3. From 00:55 to 02:14, the float bowl chamber is removed from the left side carburetor.
4. From 02:15 to 03:10, the float and the float needle is removed.
5. From 03:11 to 03:35, the slow jet is removed from the carburetor body.
6. From 03:36 to 03:53, the main jet is removed from the needle jet holder.
7. From 03:54 to 04:27, the float needle seat is removed using a 10mm socket.
8. From 04:28 to 04:55, the primary jet needle holder is removed using a 7mm socket.
9. From 04:56 to 05:16, the idle adjustment thumb screw is removed.
10. From 05:17 to 06:26, the vacuum chamber cover and diaphragm are removed.
11. From 06:27 to 07:13, the air cut-off valve and cover are removed.
12. From 07:14 to 08:23, the butterfly is removed.
13. From 08:24 to 09:06, the throttle drum and spring are removed.
14. From 09:07 to 10:51, the carburetors are separated.
15. From 10:52 to 12:12, all the parts from the left carburetor are put into a plastic bag for organization.
16. From 12:13 to 12:41, more carburetor linkage is removed.
17. From 12:42 to 14:07, the float bowl chamber is removed from the right side carburetor.
18. From 14:08 to 14:52, the float and the float needle is removed.
19. From 14:53 to 15:10, the main jet is removed from the needle jet holder.
20. From 15:11 to 15:21, the slow jet is removed from the carburetor body.
21. From 15:22 to 15:42, the primary jet needle holder is removed using a 7mm socket.
22. From 15:43 to 16:15, the float needle seat is removed using a 10mm socket.
23. From 16:16 to 17:16, the vacuum chamber cover and diaphragm are removed.
24. From 17:17 to 17:50, the air cut-off valve and cover are removed.
25. From 17:51 to 19:56, the rest of the throttle linkage is removed.
26. From 19:57 to 21:45, the rest of the parts are labeled and bagged for organization.
Негізгі бет Автокөліктер мен көлік құралдары The Video Shows the Complete Disassembly of 2003 Honda Shadow 1100 Carburetors, Including Separation
Пікірлер