Just an FYI, a jacketed 444 like a 44 is a .429. Really glad you didn't have a major problem.
@ratdaddy7774
4 ай бұрын
Yeah good call, he measured the bullet on the canalure
@vashmatrix5769
4 ай бұрын
Praise God you checked. Definitely a profession where you need to double & triple check for safety.
@carlclonts8313
4 ай бұрын
That would've been catastrophic! Uggh! Thank God you checked that. Whew!
@stevenlivingstone8401
3 ай бұрын
Good catch Jethro
@duggydo
3 ай бұрын
Glad you didn't have a bad day with that.
@sappysiggy2351
4 ай бұрын
With cans becoming the norm, I get the feeling we will be hearing more on the subject. Tanks
@warrenharrison9490
4 ай бұрын
CVA needs to address this. Crazy threads.
@thomaswall4285
3 ай бұрын
Hallelujah ! That could have been just abit uncomfortable. Very very happy it wasn't...
@wilsong4096
3 ай бұрын
Really glad you caught that , that could hv gotten dangerous!
@craigmccurdy987
4 ай бұрын
Take the can to a machine shop and have them make a new end cap with the 18m internal thread and the external to fit the can. Cost will be minimal and it will be right and much stronger in the event that you accidently knock it out of the tree stand. DOO DOO HAPENS.
@robertaus8420
4 ай бұрын
That was a good catch to what would have been a good mess. You would think firearm companies could keep a standard thread for each calibre range to make it safer.
@scaler1179
4 ай бұрын
That would actually require a lathe. I've made adapters before in mine. If you find someone to make it, make sure they use the right material, too. Brass and aluminum adapters can stretch when used, causing misalignment between your bore and can. That can cause a baffle strike. Stainless steel is best, but is much harder to machine. Any questions, just ask.
@nelsonm5032
4 ай бұрын
Nice catch! someone could get severely hurt...
@getoffmylawn8986
4 ай бұрын
Good catch, Adam. That might have gotten ugly.
@newenglandrider3189
4 ай бұрын
Phew, thank the Lord you checked before you fired. Some of us may admittedly have not checked (myself included). Good lesson.
@GeoegeColeman
4 ай бұрын
Glad you checked someone else's work before a serious accident occurred!👍
@secrestbruce
4 ай бұрын
Im glad you caught that my brother. God was watching out for you!!! Keep up the great content.
@sullybiker6520
3 ай бұрын
In the excitement of a new gun it's easy to miss really important things. Good catch. Utlimately you'd have certainly destroyed the muzzle device, and probably the barrel as it would have extruded the boolat through the hole. The back pressure would have been ungodly.
@randysmith8604
4 ай бұрын
The lord was watching out for you on this one. Good catch!
@richardturk7162
3 ай бұрын
Good that you checked it with calipers to be sure
@thomasdaniel6495
4 ай бұрын
I'm not really into cans,but considering that the the diameter of the bullet is .429-.430,I would think that you would want an inside diameter of NO LESS than .430. Good catch,it always pays to double check.Keep up the good work.
@blakegregory969
3 ай бұрын
Be careful.
@gunman-6646
4 ай бұрын
Good thing you measured it first!
@donaldballman2825
4 ай бұрын
It's a good thing you noticed that
@roygorman6624
4 ай бұрын
I am glad we did not see that can explosively enlarged.
@MichaelJohnson-bu4rr
4 ай бұрын
God was definitely with you my friend always with reloading and anything else to deal with bing bangs check and recheck good eye pays to be safe
@paulpagotto1846
3 ай бұрын
KABOOM! Good catch sir
@terrydepew1252
4 ай бұрын
Adam, call Gavintoobe and have him turn you an end cap on his lathe for your can. That intermediate adapter is a mickey mouse bad idea. You might have to send him one of your end caps off the can and the muzzle brake with it's metric thread so he can match the thread on the can and the thread on the barrel. The less threaded joints you have on your rig, the less possibility of one of them getting loose and there goes accuracy (missed deer), screwed up can ($$$) or muzzle or worse like what could have happened with swaging an angry .429 bullet down to .396!
@audiehollon4292
4 ай бұрын
I'm certainly glad you caught this. Wow, that could have been disastrous.
@apostolicoutdoors
4 ай бұрын
So glad you checked!! You might have had to stick your thumb in your neck!! Glad you’re safe!!
@jeremyfrix522
3 ай бұрын
Good man you saved your face and your new birthday present 👍🏻👍🏻
@garrettforchrist2700
4 ай бұрын
Good thing you were paying attention!🇺🇲✝️🇺🇲 Revelation 1:8 8 I am Alpha and Omega, the beginning and the ending, saith the Lord, which is, and which was, and which is to come, the Almighty.
@jamescopeland8155
4 ай бұрын
Great catch, thank you
@tasunko7672
4 ай бұрын
Good catch. Since it screws into the suppressor, it's supported and enforced by the suppressor, so I would think it would be safe to drill it out to .450. The wall SHOULD be thick enough to hold up just fine. But that's only me thinking. Don't do it just because I think it'll work. Sometimes my thinker doesn't work quite right, or at least that's what I've been told. Thanks for the heads up.
@ronaldsloan5235
4 ай бұрын
Nice catch buddy. We are glad you checked first
@barryshedd3168
4 ай бұрын
That would have turned ugly fast!
@OutdoorSolutions
4 ай бұрын
Good catch.
@WHOTEEWHO
4 ай бұрын
👍👍
@NuChad2011
4 ай бұрын
Good catch!
@DennyB-xg6fe
4 ай бұрын
Good thing you checked out the adapter!
@garywhelansr5602
4 ай бұрын
Adam no no modifying to fit get the right one. Damn man glad ya checked 1st. 👍🏻🇺🇲🇺🇲🇺🇲
@ronladuke7235
4 ай бұрын
Good observation, obviously something a guy should always check carefully before flinging bullets through the adapter, yikes.
@lightweight1974
4 ай бұрын
That could've been a bad day. Glad you checked.
@warrenharrison9490
4 ай бұрын
Gonna have to get a can to fit the metric threads🤔
@Roninx1980
4 ай бұрын
The flat parts of the jaws on the caliper are where you should measure the circumference of your round. The skinnier tips can be more deceiving.
@garymahue145
3 ай бұрын
I know Who T knows what he is doing but I do not understand why he measured the inside diameter with the outside of the caliper jaws. Please explain. Thanks.
@deanhoward4128
4 ай бұрын
Glad you caught the size difference! & you are correct about drilling or reaming the adapter out, the more metal would take out; could compromise the integrity of the metal! My advise would be to contact the suppressor company & see if they have an appropriate adapter, if not contact a local machine shop & see if they could custom build an adapter. I have experience as an electrician, plumber, welder and a retired firefighter- E.M.T. and fire & explosion investigator; so I may not be the smartest guy in the world, but I am glad that you didn't try to shoot the rifle without checking your equipment first! That is a sign of well trained shooter & gun enthusiasts! Keep up the great work & videos!!!
@A-a-ron480
4 ай бұрын
Great catch
@reallycoooool
4 ай бұрын
I'm really happy that you are safe, and caught this possible hazard.
@billbristow1768
4 ай бұрын
Glad you caught that. I guess you COULD drill it out if there's enough meat on the adaptor.
@melissamoore4624
3 ай бұрын
Well done top job, from Australia...
@claw1952
4 ай бұрын
Good catch.... after seeing the wall thickness of that adapter I would NOT drill it out either. Not enough material there for that.
@mikereinhardt4807
3 ай бұрын
Good job! Whenever you are dealing with firearms it's always good to double check your equipment!...
@RMM--uv7uk
4 ай бұрын
Get a hold of Gavin. Have him make you an adapter.
@KathrynLiz1
4 ай бұрын
That's why the 444 has the big thread... to leave enough metal. Any friend with a lathe could turn it out for you, but the wall would be pretty thin and could break if you subjected it to any large side forces.... If you had fired that rifle with the adapter on, it couldhave got "interesting. Keep safe buddy... 🙂
@slightenigma
4 ай бұрын
This was a good video, because you didn’t get hurt. Good information!
@floridagunrat1625
4 ай бұрын
You've always got to be careful when swapping cans to new and different applications. I would be leery of using an adaptor, but would much rather see you get the properly threaded component for your suppressor. Even better would be to go to a good gunsmith or machine shop and have your barrel rethreaded to a more standard 5/8-24 or 11/16-24. Im glad you caught it when you did and that you made this video to help enlighten others to the potential hazard.
@Chris_Garman
4 ай бұрын
Rethreading the barrel is not likely an option. Would require removing too much material most likely.
@erolkavlakverizon6112
4 ай бұрын
Good catch Keep staying safe
@shaunharvey1112
4 ай бұрын
Yea that would have yeeted your can into the afterlife
@TomL3grandsons
4 ай бұрын
Glad you caught that
@StarSurfer55
4 ай бұрын
As others have stated the 444 is the same diameter as the 44magnum. In fact, there was a lot of issues that if you use the pistol bullets that they were too lightly constructed.
@wayneyoung7684
4 ай бұрын
Good catch
@doncraig3665
4 ай бұрын
yep....could have made for a bad day at the range!!!! safety first!!!!
@reapergrim76
4 ай бұрын
Yikes!😊
@tonydevich7937
4 ай бұрын
Good move
@user-TJ365
4 ай бұрын
Buy the smallest thread adapter for that can and have a reputable smith cut and thread it for M18. Less chance of tolerance stacking and alignment issues than using an additional thread adapter…not to mention the Elmer Fudd potential.
@Chris_Garman
4 ай бұрын
Tolerance stacking? I think you missed an internet engineering class.
@zayacz123
3 ай бұрын
Good catch! I’m sure glad you didn’t use it.
@billyhaddock5540
4 ай бұрын
Very glad to u had checked the DIA of the adapter and the bullet/444.
@JeRKII
3 ай бұрын
AMAZING CATCH.... hope someone else sees this and it helps more then just you... Hopefully Banish makes the adapter you need as that should be the safest option
@mikewallace8087
4 ай бұрын
I have lived in the Philippines , sometimes we have flying cockroaches in the kitchen . Domestic docile spiders the size of your open hand.
@googies12a
4 ай бұрын
Nope, I'm out!
@billsiegloff2150
4 ай бұрын
As mentioned 444 projectiles are .429 to .430. Have the adapter drilled to 1/2" you will be good to go. Minimum is .470"
@jeffhays1968
4 ай бұрын
Could have been a bad day.
@chrishelms1967
4 ай бұрын
Good catch......😳
@timallen6035
4 ай бұрын
Good video. Really good information to let people know to make sure and throughly check all of your equipment before you use it. At first, I thought it might be sized for something like an AK, but I'm not sure that the inside diameter is big enough for that either. I am also glad that you caught it before something bad happened.
@JamesJones-d5s
4 ай бұрын
I had a choice to either buy a 22 semi-automatic or a 50 cal single shot CVA and I chose the CBA and I remember many years ago I made a comment why don't you make some muzzleloading content and you actually ended up doing it a couple years later or I'm not sure of the dates but I love this channel and I love the people behind it 1:09
@WHOTEEWHO
4 ай бұрын
Appreciate you watching
@billg4517
4 ай бұрын
Good video, I had the same issue with the CVA Scout Pistol chambered in 44 Magnum. I purchased a muzzle brake with the same thread pattern, attached it to the barrel and prepared to go to the range. However I started looking at the brake and got an uneasy feeling about diameter of the neck of the brake. Did a quick fit check with a 44 Magnum round and sure enough it was too large for the muzzle break. Avoided a real disaster...
@billg4517
4 ай бұрын
BTW do you shoot 44 Special in this firearm as well?
@rossholmes178
4 ай бұрын
Greetings from Australia...good catch there mate - would have made a VERY lively session at the range!
@leonhart2452
4 ай бұрын
Most jacketed bullets are .429 or .430 for the 444 and 44 mag. If you ever want to try a cast bulet and get good accuracy you may need a bullet of .432 or even larger to work well. Your can adapter needs a hole about .002 or larger than bullet diameter to give clearance for the bullet. More wont hurt.
@choccolocco
4 ай бұрын
Seemingly minor little thing could have been a major problem. Glad you caught it.
@pg981
4 ай бұрын
What's the 411 on .396 ? Catastrophic swage ! 👍🇺🇸
@ChronicalsofAl
4 ай бұрын
I'm sure you have a machine shop locally that could safely drill the adapter out to a safe clearance since those threads are ultimately supported by the can
@wayne-oo
4 ай бұрын
I bet that banish is not rated for that hot 444 !
@WHOTEEWHO
4 ай бұрын
Yes it is
@garytrainer1690
4 ай бұрын
Good catch Who Tee Who. Good information to pass along. Thanks. 👍👍
@cw2a
4 ай бұрын
Yup The 444 uses a .429 bullet same as the 44 Spl and Magnum NO DONT USE A DRILL PRESS!! Threads need be concentric with bore unless its well oversized. Making it well oversized may make it too weak/ thin.
@Chris_Garman
4 ай бұрын
Because there is already a hole it will self center.
@wrekced
4 ай бұрын
@WhoTeeWho I miss cicadas! I live in Washington state now so I don't get to hear and see them. I like hearing them in the background of your videos. Takes me back to bein' a kid in Tennessee...
@TheJohndeere212
4 ай бұрын
👍👍👍
@James-w6x9v
4 ай бұрын
It sure makes you wonder .happy birthday.great show thanks.
@Jexorz86
3 ай бұрын
Probably wouldn't have been an explosion, but almost certainly could have messed up your threads and suppressor
@johncarter3640
4 ай бұрын
Super cool catch. Gonna save somebody somewhere
@mrpearson8591
4 ай бұрын
Good eye 👀👍👍
@Raptor-gd6sk
4 ай бұрын
Whoa that was a closed call
@tylockwood904
4 ай бұрын
Happy birthday buddy!
@guyfranks4354
4 ай бұрын
The 444 Marlin cartridge uses 44 Magnum diameter bullets. Which are .429 inches in diameter.
@halfcirclehranch6877
4 ай бұрын
Just contact Silencer Central and ask them if they have, or could make, an adapter to suit your needs.
@michaelwhisman345
4 ай бұрын
Glad you caught that we can’t be having ol who tee who blowing himself up
@rosalindstewart7013
4 ай бұрын
Very good spotto there mate, could of ended nasty, love ya work, cheers Yogi ✌️🤙
@percisionshot4331
4 ай бұрын
Glad you caught that in time
@coupe50h
3 ай бұрын
since owning my lever .44 mag i found out these .44 projectiles have these variables.
@ThreenaddiesRexMegistus
4 ай бұрын
Good catch WTW! I’m glad you didn’t get caught up in the haste to try a new thing! 👍🏻
@Basketofdeplorables173
4 ай бұрын
most 30 caliber is the 5/8 thread. when you get into the big bores it jumps up to 11/16 or 18mm, so its strong enough. my 458 socom barrel from Wilson combat is 11/16 thread by some fine thread that I can't remember right now. if you bore that adapter, it may not be strong enough for full power rounds.
@shygirl-qu3ms
4 ай бұрын
good catch
@602rmiller
3 ай бұрын
It would be interesting if you slugged the barrel. That would give you the true diameter of the bullet, but probably still too close for comfort.
Пікірлер: 302