Very nice frame Tomislav! The contrast between the two colors is great. Thanks for sharing! Take care, Dave
@tomislavtomasicwoodturning
14 күн бұрын
Thank you sir
@gregdownunderinOz
15 күн бұрын
Thanks Tommi. Interesting project. Nicely done and well explained. I think I would not have as much decoration on one that I do, not to distract from photo. Loved the idea of roundover for inner part to draw eye in.
@tomislavtomasicwoodturning
15 күн бұрын
You can make it simple just round frame and it works great... I always like this kind of frames with like mouldings
@waynenickoleff9041
16 күн бұрын
Hi Tomislav, that’s a lovely looking picture frame simple yet elegant! You’ve just provided me with a great way to get rid of lots of segmented pieces I have, thanks for another well executed video. Take care, Wayne
@tomislavtomasicwoodturning
15 күн бұрын
Uuu that could end up a rather uncommon and beautiful frame. Maybe even caos pattern and its really unique
@terryyancy3957
13 күн бұрын
Very nice Tomislav. I like it
@user-zm8kb9ck5h
15 күн бұрын
Very Nice
@0student
15 күн бұрын
good idea, I just ruined another bowl blank by cutting through the bottom all the way! Now it can be a frame!
@tomislavtomasicwoodturning
15 күн бұрын
Excactly 👍 thank you for watching
@billy19461
15 күн бұрын
That was great and informative.
@jackthompson5092
15 күн бұрын
Great looking picture frame Tomislav. I now know what to do with a lot of left over segmented rings.
@tomislavtomasicwoodturning
14 күн бұрын
Uuuu that should be really nice frames
@alun7006
14 күн бұрын
Lovely! Will have to give this a go!
@qapla
16 күн бұрын
What a clever way to use some scrap. Thanks for this video. Really helps show that every turning does not have to be large or complicated to look nice and be usable.
@tomislavtomasicwoodturning
15 күн бұрын
Sometimes on smaller stuff there are less room for error and it can be difficult to design, so its always a good practice to start small☺️
@davidjackson8787
15 күн бұрын
I was making my first plate and cut a little deep. What I had after that looked just like your picture frame. My wife saw it and had me sand it up and installed a picture. 😀
@tomislavtomasicwoodturning
15 күн бұрын
Awsome, you manage to Save the bowl
@bradbyers7505
15 күн бұрын
A great alternative to rectangular picture frames! I must try to make one soon. Thanks for sharing your technique.
@tomislavtomasicwoodturning
15 күн бұрын
Thank you for watching
@clydeschuyler
16 күн бұрын
Wonderful idea. Never would have thought picture frames.
@c.a.chambers68
15 күн бұрын
Wow a picture frame had never crossed my mind on a lathe! No idea why because this is an amazing way to use offcuts. It looks so visually pleasing- thank you for sharing
@tomislavtomasicwoodturning
15 күн бұрын
Glad you like it and thank you for watching
@DavidBird-uu8km
15 күн бұрын
Very nice. I love the detials.
@tomislavtomasicwoodturning
14 күн бұрын
Thank you
@richardbufton3605
15 күн бұрын
Very nice Tomislav. But I'm not putting your picture in my frame 😄
@tomislavtomasicwoodturning
15 күн бұрын
Aaaa that is too bad😂 no worries, glad you like it and PLEASE put your memories inside😅
@allenspain
15 күн бұрын
Very nice!
@silkerayphillips6948
15 күн бұрын
Thanks! This option will be keeping some off cuts from the fire.
@tomislavtomasicwoodturning
14 күн бұрын
Glad to hear that ☺️
@Pabloos8634
16 күн бұрын
its beautiful 👍
@engste678
16 күн бұрын
Great idea for off cuts. I'm still learning, I tried to sand without moving the rest ... I'll be back at it when my finger heals up. 😖
@tomislavtomasicwoodturning
15 күн бұрын
You can move the rest when sanding,I would not move it if I'm on some sort of production run, not moving can save time but for pieces like this just move it and sometimes its even better as you have more room to move around. Hope that makes sense. Enjoy turning and thank you for watching
@johnnyb95678
15 күн бұрын
What a great quick and easy project. Thank you for the detailed instruction on how you turned this nice picture frame.
@tomislavtomasicwoodturning
15 күн бұрын
Thank you
@DougMilleratWoodSpunRound
16 күн бұрын
Excellent frame. Some folks try to make them much more complicated. I love this simple method.
@tomislavtomasicwoodturning
15 күн бұрын
Thank You Doug.☺️
@jorisdemoel3821
15 күн бұрын
That looks very nice, and some good tips and techniques as always. But I have to admit I was hoping you'd take out the centre and make a plug for the hole and create a small two-coloured bowl. Thanks for another excellent and educational video.
@tomislavtomasicwoodturning
15 күн бұрын
When I edit the video I was thinking the same, but it was already over😀. I was thinking of another small frame
@racheldray1057
6 күн бұрын
Love it
@markduggan3451
15 күн бұрын
Very nice.
@ianbedwell4871
16 күн бұрын
Another great project to try, thank you. I have made picture frames just using a screw chuck and turning the face then V grove 2/3rds thru before reversing and coming in from the back but this is much nicer. Thank you
@tomislavtomasicwoodturning
15 күн бұрын
That is good option and a faster one as well.... Thank you for watching
@abrodeck
16 күн бұрын
Hello Tomislav, you see, I've learnt something from you again. I probably wouldn't have had the idea of turning picture frames on my own. So thanks again for your inspiration. Greetings Andreas
@tomislavtomasicwoodturning
15 күн бұрын
Thank you Andreas , I'm honored to inspired and help out. Thank you and let me know how it went
@beadedlizard
16 күн бұрын
Excellent frame, thank you Tomislav.
@tomislavtomasicwoodturning
15 күн бұрын
Glad you love it 🤗
@BobBlarneystone
15 күн бұрын
The grain lines of the discs appeared to about 45 degrees different. Is that orientation important? And, I just bought a cheap clock today and I was thinking of doing this same idea to replace the plastic case. That's how to make a $5 clock into a $25 clock.
@tomislavtomasicwoodturning
15 күн бұрын
Its alinge the same way, that way grain goes in same direction.... And its nive and stable for frame. You can use a clock as well, I'll be doing a video soon on that as well
@calvinderuiter2033
15 күн бұрын
Hi any advice or tips for handling chip out or tear out asides from sanding
@tomislavtomasicwoodturning
15 күн бұрын
Proper tehnique and tool approch is everything, ofcourse sharp tools as well. I have a video few days old where I show bowl without sanding, that might help out
@turningwiththewoods
15 күн бұрын
Clever. Will show the my wife and see if she wants one.
@tomislavtomasicwoodturning
15 күн бұрын
They usually want but more for vintage pictures....that is atleast the case with my wife
Пікірлер: 58