I’m so glad that my video helped you. I’m a high school sewing teacher and I have 40 of these machines in my classroom. I made the video to show my students how to thread the machine. I’m happy to know that it helped you as well.
@katemantenieks8225
2 жыл бұрын
I only use my machine a few times a year and I watch your video each time. Not sure what I’d do without you! Please don’t ever take it down. 😄
@mercyandersen4808
3 жыл бұрын
This video is so helpful! We love you and your work so much. Attempting to make fleeces and we couldn’t do it without you...literally because we didn’t know how to work the machine
@blainegorelik6014
3 жыл бұрын
Mercy, I’m so glad that I was able to help you. Enjoy making your fleeces! Blaine
@julietdavid846
3 жыл бұрын
You're such a darling 💕😘. OMG I couldn't thank you enough, you have saved me a lot . Thank you so much 🥰. I got mine used one and the model is 215 but I have to follow up with yours and everything is fine ☺️ thanks for sharing 💖
@9mccloud
Жыл бұрын
Thank you for a great!! Demonstration. I just purchased one I love it.🙏🏾❤️🙏🏾💐🙌🏽
@libermail
6 жыл бұрын
Thanks for the tutorial! My grandma give's me her machine and i need to learn to use it! This video helps me so much!
@DELGREYMOVIES
6 жыл бұрын
Thank you, thank u ,Am so happy to find this tutorial, I just bought this machine second-hand and I keep wondering wether i should oil it.May you please do more videos on this machine especially on its care and maintenance and all the other stitches it comes with
@NovemberVotta
2 жыл бұрын
You are amazing!! Best Video You made my day !
@ijasminlucero
6 жыл бұрын
Thank you so much for posting! Do you think you could post more videos with this machine? I just bought a used one and am trying to learn as much as I can!
@blainegorelik6014
4 жыл бұрын
April, enjoy your Huskystar machine. I teach sewing and I have 40 of these machines in my classroom. Great machines.
@nikyvaldez3389
3 жыл бұрын
Pues me acaban de regalar una venía como pegada que no la usaban pero la aceite y si cosio pero ahorita se puso duro y no camina ni sube ni baja no sé que sera
@nikyvaldez3389
3 жыл бұрын
Como dicen se amarro
@texaswildflower7715
4 жыл бұрын
I was gifted a VERY gently used Hukystar today. I'm already in love with it. I already have a singer that I'm so used to... But planning on using this strictly for appliqué work. Save the wear and tear on my electronics.
@blainegorelik6014
3 жыл бұрын
Have fun!
@benjaminmantenieks8
5 жыл бұрын
Thank you my mom says she loves you you are very helpful
@mayalunamagick5376
4 жыл бұрын
Thank you so much for this video!! Can't wait to start sewing 😍♥️👏
@blainegorelik6014
3 жыл бұрын
Have fun!
@blainegorelik6014
5 жыл бұрын
It is well worth $40. I buy them for my sewing class and have several. If I can get them for less than $150, it is a good deal.
@helenehoule1289
Жыл бұрын
My sewing machine is a 220 model. I have yet to be able to use the threader. I wish there was a video available by a teacher with your teaching skill. Thank you
@blainegorelik6014
5 жыл бұрын
That’s an interesting question. You should try it each way to see what works best for your machine. I’ve always taught students to have the thread go over the spool because that was the way I was taught.
@mirandaking1196
4 жыл бұрын
Thank you for this video!
@blainegorelik6014
3 жыл бұрын
You are so welcome!
@shay758
6 жыл бұрын
I just received this machine from my mom and would love to learn how to do a button hole or gathering stitch with this machine. Also different hem stitches or settings for silky or difficult fabric.
@marleenkerri2408
4 жыл бұрын
Thank you for this! I haven't been able to find my manual in a while and am having a hard time figuring out how to use the specialty stitch options on the machine. Can you help with that?
@IamUncledeuce
5 жыл бұрын
Great help! Thanks!
@altheamayberry6142
5 жыл бұрын
Hello. Thanks for sharing your video. Now I can set up my machine. You wouldn't happen to have more tutorials on the Huskystar 219, would you?
@blainegorelik6014
3 жыл бұрын
Hi Althea, No, I don't have any other videos on the Huskstar but I have several other videos. In the video that I made about sewing of shorts I use the Huskystar. Maybe you would like to watch it in action?
@Rosberryify
4 ай бұрын
What type of bobbin does this machine need?
@IamUncledeuce
5 жыл бұрын
I have successfully conquered the model 219 threading problem. Thank you. I do have a question though. My 219 manual clearly shows this thread going underneath the spool rather than over the top as demonstrated. Does your manual differ from mine? And by going under as my manual clearly shows, would that change the thread tension? Thank you so much for your very informative and clearly demonstrated video.
@blainegorelik6014
3 жыл бұрын
I'm so sorry, I just saw your questions. I've always had the thread going over the top. You can try it both ways to see what works best on your machine. No, it does not change the tension.
@My2Cents1
Жыл бұрын
I had a helluva time trying to get the bobbin off the threader when it was done. I through I was gonna break the machine, or at least the bobbin. I mean it was STUCK. After about 10 mins of prying and pulling the thing came off so violently I sent it flying into the ceiling. Bobbin center must be the wrong diameter or something.
@123craftygal
4 жыл бұрын
I love this machine and it’s a long story but I sold mine, then missed it so much I bought one on EBay. Unfortunately it came with the freearm loose. The problem is the little metal gizmo won’t go into the hole. Any suggestions? I can send a pic if need be
@blainegorelik6014
4 жыл бұрын
Catherine, I know exactly what you mean and I have the same problem with one of my mine. I wish I could tell you how to fix it, but I can't. You may need to take it to a repair shop to see what they can do.
@123craftygal
4 жыл бұрын
Blaine Gorelik, what did you do? Repair place tried but no go. He actually said to duct tape it!! I guess that’s an option.
@blainegorelik6014
4 жыл бұрын
@@123craftygal I actually do not assign that machine to a student because of that issue. I'm sorry that I can't be of more help.
@jeanapatay1004
2 жыл бұрын
I already followed the steps, but still it is not working. may I know what happened? I need help.
@catgirl1016
3 жыл бұрын
What type of bobbin does this machine use? I saw one at a charity shop for 58.00 and was thinking of purchasing it. It was a Huskystar 224.
@blainegorelik6014
3 жыл бұрын
Hi Silva, Use class 15 clear plastic bobbins. Thanks for asking! Blaine
@catgirl1016
3 жыл бұрын
@@blainegorelik6014 Thanks!
@jannettebecker6223
4 жыл бұрын
I've had my Husky star for years it's a very simple machine to use ..But unfortunately I ha ent used it for a really long time .Yep were talking "years" and I k ow it needs to be oiled up before I use it again So my question is "how and where do you oil it..?? Last time i took it to a sewing machine shop to have it done..But I just dont want to pay someone that I'm hoping i can do myself..HELP !! Thanks So so much !!
@blainegorelik6014
3 жыл бұрын
I don't oil my machines. I have machines serviced whenever they aren't working properly and it is something that is done for maintenance.
@blancagonzalez8360
3 жыл бұрын
Donde puedo comprar está máquina?
@derreckmckenzie5521
3 жыл бұрын
how heavy of material will a huskey star 224 sew will it sew leather
@blainegorelik6014
3 жыл бұрын
Derreck, I don't know the answer to this. I use a Huskystar 219 and I haven't tried to sew leather on it. Just make sure to have a heavy gauge needle that is meant for leather. It is going to be either a 16 or 18. Good luck with your project!
@lillytopaz2899
5 жыл бұрын
How much are one of these worth? Do you think it's a quality machine despite it being an old model? I'm considering buying one second hand for $40
@blainegorelik6014
3 жыл бұрын
I know this is an old post, and your window of opportunity is over for purchasing the machine for $40 but if anyone else reads this, I would say that the machine is worth about $125, used. If you find one for less than that, it would be a great purchase.
@blainegorelik6014
5 жыл бұрын
Benjamin - Please tell your Mother thank you!
@doloresteomiro6603
3 жыл бұрын
Porque apretó el botón de coser al revés y no va para atrás
@doloresteomiro6603
3 жыл бұрын
No me funciona no baja ni sube la aguja solo se olle el motor
Пікірлер: 53