That looked like the worst longest calibration ever.
@jessecook3593
2 жыл бұрын
Kind of weird the smaller, cheaper Nucleus Nano has an auto-calibration mode that you can set by exactly one press of a button, but the more robust system with handles has an eight step calibration process. Was looking at buying these handles but now I'm seriously questioning it - seems like one lens change would create an even larger time suck.
@JJ_Khailha
2 жыл бұрын
@@jessecook3593 Nano requires recalibration after every power off.
@jakesouthard9175
3 жыл бұрын
I love these handles, but the setup is daunting....
@davidp158
5 жыл бұрын
Just a suggestion: Would there be a way to make the menu font MUCH larger for legibility? Rather than squeezing so much text into the tiny screen, I would rather have much larger text and scroll through a few screens as needed. I just can not read these screens, especially in bright light.
@TILTA
5 жыл бұрын
Hey Dave, unfortunately there is no way to increase the font size on these screens. This feature could be added with a future software update, but there is no word on this at the moment.
@davidp158
5 жыл бұрын
@@TILTA Thanks for the reply. Maybe instead of larger fonts, some kind of icon/symbol could be employed. Or, just consider a larger display in the future? It is really hard to read. Thanks for listening.
@ndelacru
4 жыл бұрын
TILTA if my wheel part is not turning the motors anymore can it be fixed? i mean the record button works. the controller is set to slave. but my handgrips wont turn the motors when i turn the handgrips finger wheel. it isnt doing anything. i only see a connection by having the record button activating on and off from grip to motor
@davidp158
4 жыл бұрын
@@ndelacru Not sure if this will help, but I have heard that if the controller wheel is close to the motors, sometimes the connection is lost or inconsistent. So, try moving the controller farther away to see if the motors start turning. Good luck.
@terralukemedia8691
3 жыл бұрын
Unfortunately I noticed a trend with Tilta’s product, that once out in the wild and in production, they stop developing firmware to enhance functionality and move on to the next product that will make them money. This is sad that they focus R&D only on getting new customers instead of keeping their existing customers happy. I love my Nucleus M but there hasn’t been a firmware update addressing obvious bugs since May 2018, and much like their G2X which I also own has been abandoned for the latest, greatest product. This calibration process is convoluted and lacks any concern for being field expedient or an efficient interface design.
@renatopico9989
2 ай бұрын
Hi there I just want to know if nucleus nano motor is compatible with nucleus m right handle grip thank you
@dutchmilk
Жыл бұрын
I have sent the items for repair for the gear turning is weak and slow. It came back the same way. May someone from Tilta actually explain if using left handle and the WLC T03M can work as a pair - I brought the Partial Kit III, or the FIZ unit is required to make it work? I am certain the units are both faulty but according to your repair department, the problems lies with calibration. My light is always red.
@3ikeru
2 жыл бұрын
Hello. I have a problem. When i put the zoom motor on my 70-200 photo lens. It allways jumps from the track. It forces the lens to move from its place. One time it completly taken out my lens from the mount, lucky i had my hands on it and caught it. What should i do? How do i secure it so it doesnt jump from the track?
@philipvivarelli
2 жыл бұрын
My left handle stops at around 690 with the range switch up after this calibration. How can I solve this?
@StifaniBrothers
Жыл бұрын
Same probkem
@Aaron_Smith_OM
2 жыл бұрын
I have three motors on for Focus, Iris, and Zoom. My handle that controls Iris and Zoom motors will "twitch", jumping or spinning the lens about 15 degrees without me touching the wheels and knob. And when I look at the screen, the letters K and J flash along with the word "FREE" next to them. Then, it goes away and K continues to flash on the screen. How do I fix this issue? Better yet, what's causing it?
@Aaron_Smith_OM
2 жыл бұрын
Never mind. I fixed it. One of the 18650 batteries was a complete dud. Got rid of it. Hopefully that solves it.
@DroseMr
2 жыл бұрын
Can this handle be used w nucleus nano motor?
@daanjessevenmans
2 жыл бұрын
Is there a way to calibrate the zoom knob as well?
@TILTA
2 жыл бұрын
There is not, but if you are having issues we can help! Please contact us at: support@tilta.com
@exurkun
4 жыл бұрын
Hi, when to wait for a new gimbal?
@xveganx
4 жыл бұрын
Hi, any update about BMPCC tilt screen? Thank you
@MrGuilhermeFernandes
5 жыл бұрын
Does it save the calibration if you turn off everything?
@TILTA
5 жыл бұрын
Yes, this calibration is saved once performed. Something in the software may get jumbled around in the future where you might need to perform this calibration again but these instances are few and far between (if it occurs at all).
@pengroger6757
Жыл бұрын
Does anyone by the chance to know...how do i adjust nucleus m handgrip's nucleus nano rotate distance when i link it to nucleus nano servo, i can only make it move about 10mm. thanks!
@mattiapalombi1597
Жыл бұрын
I just received a new right handle but the unit doesn't turn ON! :(
@TILTA
Жыл бұрын
sorry for this experience, email us at support@tilta.com so we can better assist you.
@mattiapalombi1597
Жыл бұрын
@@TILTA I'm returning the unit. Needless to say but this is quite an inconvenience.
@intellisound
Жыл бұрын
@@mattiapalombi1597 It may be a battery issue. Are your batteries "button-top" or "flat-top"? I have a ton of 18650 "flat-top" batteries and they would not work consistently for me. Freshly charged batteries would not even power ON the Tilta handle! ("Flat-top" batteries aren't designed to be stacked in series like "button-top" batteries. I think I was simply getting lucky the times they did work, but the inconsistency was killing me.) I have since purchased the Tilta-recommended Garberiel 18650 "button-top" batteries and have not had any issues with them. I used the link right off Tilta's website. Just search "Which batteries do you recommend for the Nucleus-M?" Definitely something to consider. Good luck!
@mattiapalombi1597
Жыл бұрын
@@intellisound Thank you for stepping in. I received a new unit. It works properly. To answer your question yes I use the recommended batteries only.
@iamdaniximenes
3 жыл бұрын
When I connect the handle to the motor all turn on..but I put the 18650 battery and not go ON..any council??
@iamdaniximenes
3 жыл бұрын
And yes, the batteries ara full
@TILTA
3 жыл бұрын
Please contact our support team! support@tilta.com
@rudolphlagarrigue5072
4 жыл бұрын
After recalibrate right handle as spécified on your tutorial, my L range is ok 000to999 but my M and S are now limited to M 112to999 and S 000to 754 do you know how i can resolve this ?
@stevengoetz6220
4 жыл бұрын
Did you figure this out?
@rudolphlagarrigue5072
4 жыл бұрын
@@stevengoetz6220 No i sent back my left handle to tilta.... but after tried other one left handle, i have notice same problem.... i will see after tilta send me back my left handle. What i would is make a---b point in L mode and next go to S mode to have smaller move with knob but for the moment as i did'nt have full range in S mode i can't do that.
@stevengoetz6220
4 жыл бұрын
@@rudolphlagarrigue5072 I am using the right handle knob for focus since its ranges work correctly and using the left handle for iris. Not a perfect solution. I will be very interested to know if Tilta solves your problem!
@rudolphlagarrigue5072
4 жыл бұрын
@@stevengoetz6220 your right handle have 000 to 999 range in three mode L M and S ?
@stevengoetz6220
4 жыл бұрын
@@rudolphlagarrigue5072 Yes the right handle had 0 to 999 in all modes but the left handle shows the same limitation you are experiencing in M and S.
@scottlehman4068
2 ай бұрын
Mine just stopped working
@TILTA
2 ай бұрын
shoot our support department an email at support@tilta.com!
Пікірлер: 48