I love the way you show the parts, part numbers, and price on the left of the screen. This attention to detail is what separates great mechanics videos from good mechanics videos. Very helpful.
@oscargalindo26
Жыл бұрын
I agree! Probably the only one who ever does.
@johnnimmo5721
3 жыл бұрын
Hello Paul. Thank you so very much for making this video. In late March, I had the water pump impeller shaft break and the timing belt jumped several teeth on my wife's 97 Toyota Rav4. I had her car put in the repair shop and was told the car had a blown head gasket and the engine would need to be replaced. I had the car towed back home and then I ran across your video. I have worked on her car for 2 1/2 months and finally finished it this weekend and it runs great! It did not have a blown head gasket! The biggest problem I had was removing the harmonic balancer bolt. I tried several impact wrenches and that bolt wouldn't budge. A friend of mine is a mobile mechanic and he brought over a diesel powered impact wrench and finally removed that bolt. I couldn't have done this work without your video. I even bought that special mountain rachet tool you had in your video and that was a lifesaver on getting to the hard to reach bolts. Thanks again for such a great and detailed video!
@vd4534
9 ай бұрын
Z této poruchy pak vyplývá, že ani při prasknutí rozvodového řemene nedojde k destrukci motoru. Je to skutečně tak? Prosím o odpověď. Děkuji a zdravím.🤔🤩
@DK-rl1dy
3 жыл бұрын
Damn, Paul. Your videos are a cut above all others. Your attention to detail, showing each step very carefully, well lit, and according to spec is highly professional. Your knowledge in the areas of music mixing, repair to scooters and cars, computers, and others is amazing. Thank you for your videos. Thank you for the time you spend on them.
@LabCoatPaul
3 жыл бұрын
Thanks! I'm glad you enjoy this channel!
@stevejette2329
5 ай бұрын
DK - Well said ! I couldn't agree more. Also like the Chris Fix series and The Car Care Nut.
@ericfernandez7094
4 ай бұрын
I like how clean you made all the parts you touched. Great workmanship
@numberwhite7082
2 жыл бұрын
Thank you for guiding me throughout this process. Im 5 minutes into the video and 1/4 on the way there. Took me 10 hours already so estimated 30 hours left. :)
@LabCoatPaul
2 жыл бұрын
The timing belt is pretty hard to do on these cars. You got this.
@franzjosef47
Ай бұрын
Probably the best overall video on mx work that I've seen anywhere. Thanks for the attention to detail, and concise delivery.
@nicolasdanjou1262
3 жыл бұрын
This video is AWESOME! I am doing this job at the moment on my 1997 Rav4 and this is perfect walk through/talk through with images. All new parts that gets in with a different color (well I can't go wrong with this). The price of the parts on the side, all the torque measurement, all clean and clear. It is perfect! Thank you so much for this help.
@JustMe-md4go
2 жыл бұрын
Wow idk what to even say your making this almost to easy, I mean you pretty much replaced my water pump, timing belt and my oil pump seal for me. I hope for every diy'er you dont stop what your doin, thank you for going the extra 10 miles for us.
@LabCoatPaul
2 жыл бұрын
I'm glad it was helpful. Thanks for watching!
@rouge0449
10 ай бұрын
I need such motivation to replace my 99's timing belt. I hear flapping sound on cold start, but goes away when engine is already on operating temperature. Thanks Paul. You're great!
@LabCoatPaul
10 ай бұрын
You're welcome, and good luck.
@william-131
2 ай бұрын
Regarding the tensioner spring. According to the manual (10:20) it should measure 46mm. Inside to Inside, see the drawing. However you measure the outside and get 45mm. I got confused as I measured my spring according to your example and got 48mm. I concluded it was faulty and ordered a new one which measured 48mm again. Untill I found the same drawing, as you show in your video, in my Haynes manual and discovered it should be measured inside to inside. Now I have two servicable springs;-) The video was a great help though. Thanks!
@keith5555
Жыл бұрын
I just bought a 99 RAV4 not running. Was told that just stopped running one day. Getting ready to tare to it down today. This video was very helpful to know what the Jo is going to consist of. I have worked on vehicles for last 20 years. However this is my first Toyota so thank you for the information. You have went into great detail on this clip. Very informative. Thank you
@GageGoble
6 ай бұрын
I can’t explain how beneficial your videos are. You have saved me a lot of money and time thank you for all you do!
@WarWagonMT
Жыл бұрын
Awesome video. The effort you have put in to painting each part to distinguish it from others must not go unnoticed. Well done.
@aruns8638
2 жыл бұрын
Man... the amount of effort you put in this puppy. makes me wanna by the car. Love the content Paul.
@LabCoatPaul
2 жыл бұрын
Thanks! This car was definitely a lot of work.
@spencerduncan7006
2 жыл бұрын
I'll be using you video to take me through the process in a couple weeks. Thank you for making the ownership of a gen 1 so easy!
@danzwook
4 ай бұрын
Fantastic video Paul, thanks for all the effort you put in to produce it! I had a Timing belt failure on my 98 Rav, and this video has been a real help in getting a new one fitted, cheers! Dan (Uk)
@ignacioanaya3403
3 жыл бұрын
I am removing the engine to rebuild it now, this will help me a lot!
@LabCoatPaul
3 жыл бұрын
You'll want to see the cylinder head replacement video too: kzitem.info/news/bejne/rKmsn2yAr3Sii6g
@Ebonynightbeast
3 ай бұрын
Tough job, had to blip the starter to get the balancer off. Definitely took longer than 7 hours by myself without air tools. Thanks for the walkthrough.
@LabCoatPaul
3 ай бұрын
You're welcome. Congratulations on fixing your car!
@Dominoid86
3 ай бұрын
There's an easier way using the old serp belt!!
@videoswitch
2 жыл бұрын
Thank you Lab Coat for making this video! I watched every minute, sometimes several times, as I worked through this job. You covered every detail, and I appreciated having the torque values as well. My car runs like new!
@LabCoatPaul
2 жыл бұрын
Congratulations! The timing belt is a lot of work. Thanks for watching.
@gezadome6797
Жыл бұрын
Great job, Paul. It's cool to see all the different colors you choose to paint the parts. However, as you measured the spring, I noticed that on the picture, the spring measurement was indicated from the inside of the hock. Thx
@JonathanWhoever
2 жыл бұрын
You are head and shoulders above some videos. Clear and well edited.
@LabCoatPaul
2 жыл бұрын
Thanks! I'm glad you liked the video.
@dcwwild
3 жыл бұрын
Great video. I'm half way through doing mine at the moment (water pump let go.) It's RHD so no battery tray but a brake servo ,that reduces available room, and I just moved the power steering reservoir out of the way without disconnecting.
@gregorykleiman2137
Жыл бұрын
Yes I was watching the video thinking why is the battery on that side. Mine is RHD too. Thanks for the answer.
@nickaa827
3 жыл бұрын
2 rav4 videos in 1 week 🤯
@Kingdragon1981
3 жыл бұрын
You are awesome, I wish I could have a mechanic like you
@CigRacing
Жыл бұрын
The best. The best. I am all about the details like you're doing with colored vinyl tape, and painting brackets. Nice Work!
@LabCoatPaul
Жыл бұрын
Thank you very much!
@abigailmendoza2502
11 ай бұрын
I am so lucky to have the same car as you Paul. Thanks for the DIY! 😋😋😋 Will have this on replay!
@Toyota_RAV4_XA1
3 жыл бұрын
Great Video! What is your next project you are planning to do on your Rav4? I can't wait to see more videos. May be you do a video on how to clean the throttle body and IACV together with the EGR valve on your Rav4. Thanks.
@sirsir108
3 жыл бұрын
I had a really hard time seeing through the hole in the cam gear in my 99 4 door using a step bit to drill a bigger hole is genius
@nickaa827
2 жыл бұрын
Thanks for the video Paul, doing this job now. Unfortunately it is a pain to remove and install the engine mount because the mounting bolts are stuffed under the bracket for the ABS pump...
@poman911
2 жыл бұрын
That is the same technique for replacing the 1997-2001 4 cylinder camry. Always replace the oil pump two seals. Also replace the water pump, crankshaft and camshaft seals every 200K miles.
@jonathanmonger111
3 жыл бұрын
Man I love your Rav4, it is the best in the world. So nice and clean and thanks for the video.
@janeriochristopher6920
6 ай бұрын
This is the informative video, I’ve seen for this 3sfe absolutely amazing
@carmenhammer6034
3 жыл бұрын
Hello, Paul. My husband and I also own a Toyota RAV4 in 1999. We love watching your videos and we're a little jealous because you can fix your RAV4 so well. My husband would like to have our RAV4 armed, too. Unfortunately, we're too far away, Frankfurt a. M. Germany. Our Toyota has a gas engine with 19400km. How long do you think we can drive him if we treat him well? We're waiting for new videos of you and your RAV.
@randyyocum4067
Жыл бұрын
terrific video,well done ,lots of information, I really like how you clean and paint various parts different colors for easy identification, great touch. thanks
@alexstrings
Жыл бұрын
This video is one of the Best i have ever seen.
@ntomdia
Жыл бұрын
Thank you Paul, just finished replacing mine.
@yuuur4930
3 жыл бұрын
Just got a 97 2d last week and I love it. I've been studying these videos and I've learned a lot thank you! Can you please tell me what kind of paint you're using on the engine parts?
@LabCoatPaul
3 жыл бұрын
I used VHT engine enamel from the auto parts store. It's a high temperature spray paint for engines. I don't recommend it. The paint is a bit runny and chips easily. I haven't found good spray paint in a can. POR 15 is the good paint, but I haven't tried it yet. por15.com/
@yuuur4930
3 жыл бұрын
@@LabCoatPaul awesome thanks so much I'm glad I know now!
@dabitcoinbandit3553
2 жыл бұрын
This is super helpful I'm gonna drop an engine into my 2000 rav but maybe the problem is the timing belt
@kirkhamilton7515
6 ай бұрын
VERY NICE TY. only thing is those are the wrong spark plugs btw it takes the ones that has 2 electrodes coming from the side.
@docjody8624
Жыл бұрын
Lab Coat Paul, your engine bay is a Work of Art, so clean & colorful enough to eat off! 1/ What highest temperature °F does RAV4 Exhaust Manifold's Heat Shield reach? 2/ What paint brand/type did you use on your gorgeous engine? 3/ What cleaner is safest to use to de-grime engine bay w/out blowing up electronics? Thanks kindly!!!
@LabCoatPaul
Жыл бұрын
Thanks! Usually the exhaust manifold stays around 500 degrees fahrenheit. The heat shield will be much cooler. I used spray paint on everything, and I don't recommend it. The paint is very weak and dropping a wrench or sneezing near the car will make it fall off. For suspension components I used Rust-Oleum primer, then Rust-Oleum High Performance Enamel industrial strength paint. The primer is great, but I'm not sure what "industry" the paint is for. The pillow making industry perhaps? That paint is trash. For the engine paint I used VHT high temperature engine enamel from Autozone. It's rated for 550 F. Also trash. I had to touch paint my valve cover after dropping a wrench on it. For the exhaust I used Rust-Oleum high heat paint. It's rated for 2000 F and the can says "stops rust". The paint didn't burn off the exhaust but I did get rust spots showing through after just 2 months. For the fender wells I used Raptor 1k pro enamel. It has a picture of a truck on the can so it's tough. That paint is very thin and flakes off easily on flat surfaces, but did great on the textured surfaces by the wheels. Spray paint is cheap and easy, but not durable at all. You can get your parts powder coated, but it's expensive and can only be done to metal parts that can go in an oven. I use purple power engine degreaser. It's just strong soap, then I scrub anything I can reach with a brush, then pressure wash it. Hot water works better than cold water. Everything in the engine bay is waterproof, but be careful spraying near electrical connections. Avoid spraying directly into connectors, the alternator, and the distributor. Washing the battery won't damage it. To clean corroded battery terminals, boil a pot of hot water and dump baking soda in it. Pour the hot baking soda solution over the battery and terminals to neutralize any acid that leaked out of the battery.
@docjody8624
Жыл бұрын
When removing Spark Plug Tubes (to reseal the FIPG) what's your preferred method to clean out Spark Plug Wells (w/out debris falling into the block) & best method to remove hardened, old baked-on RTV from Spark Plug Tube threads?
@Dominoid86
4 ай бұрын
This video sir was yeah...HATS OFF TO YOU SIR!!!
@music4lyfe963
3 жыл бұрын
I just got one of these from my girlfriends parents and I plan to do a drive train swap to make it 4wd and do a 3sgte swap
@LabCoatPaul
3 жыл бұрын
I'm thinking about a 3SGTE swap too, but it's so much work, and so expensive!
@vd4534
10 күн бұрын
Co Vás k tomu vede, že uvažujete o výměně motoru 3S-FE za 3S-GTE. Myslím si, že čím jednodušší tím spolehlivêjší a lepší. Nebo se mýlím a proč? Děkuji za odpověď. 🤩👍
@bkendall315
Жыл бұрын
Paul - Thank you for this video ... our '99 is loving its new Aisin water pump, thermostat, timing belt, tensioner, idler, and oil pump seal! If I may comment, this video skipped over removing the whole water pump housing, which is a lil tricky, so I ended up leaving the orig. housing in ... no biggie. I wanted to send you a donation via your patreon, but it only has monthly memberships ?? Is there a way to just send money? You saved me a ton doing it myself, and this video is WAY better than the Haynes manual I have!
@LabCoatPaul
Жыл бұрын
I'm glad it was helpful! KZitem has a $Thanks button just under the video where you can throw me a couple bucks one time. I replaced the water pump housing and many other things in my cylinder head video here: kzitem.info/news/bejne/rKmsn2yAr3Sii6g
@stevejette2329
5 ай бұрын
I had that done on the 2001 Celica a couple years ago. $700 in north San Francisco Bay area. Just getting in there makes it too difficult for me.
@vanab5126
Жыл бұрын
Great video! You make it look easy, but I'm certain I'm about to f this up real bad😩
@LabCoatPaul
Жыл бұрын
The hardest part is the motor mount bolts. Second hardest is installing the belt correctly. The good news is you won't break your engine if you do it wrong. It's a non-interference engine, meaning the valves will never hit the pistons, even if the timing belt is installed wrong.
@colbemugen9932
3 жыл бұрын
pog i’m hopefully getting one of these cause they are reliable and this video will help
@nickaa827
11 ай бұрын
you ever thought about doing a video on upgrading the 5th gear?
@jameskoehle4841
3 жыл бұрын
Hey Paul, great vid as always! I noticed you put power steering fluid in the power steering system instead of the ATF that the manual asks for? Would that be a problem or who cares? thanks!
@brockturner3112
3 жыл бұрын
Yes, it slowly destroys Toyota pumps.
@LabCoatPaul
3 жыл бұрын
@@brockturner3112 I've found that switching the type of fluid in an old car like this is generally a bad idea. The old seals can't handle stuff like that. I have a new power steering pump and hoses, so I just hope the rack doesn't start leaking.
@brockturner3112
3 жыл бұрын
@@LabCoatPaul idk, I know you know what your doing. But with our 00 ES300, 04 GX470, 98 camry, and 02 Solara switching to atf rejuvenated the ps pumps. They were whining and/or leaking, because of previous owners going to quick lube and having the systems flushed with Universal powersteering fluid. Putting atf back in the system helped all of them. However, none of our Toyotas have been as unreliable and annoying as that rav4.... So your probably right 🤗
@LabCoatPaul
3 жыл бұрын
@@brockturner3112 That's good advice. Yeah, I might have found the worst RAV4. I'm almost done fixing all the problems, after 26 videos.
@highpockets4748
3 жыл бұрын
Best video of all time
@Breakingbylaws
2 жыл бұрын
thank u op, excellent reference video, great job, thanks again!
@docjody8624
Жыл бұрын
Hey Lab Coat Paul, are those colorful splashes in your engine bay regular split wire conduit looms, heat-shrink cable sleeves, or vinyl wraps-- Where did you buy it?
@metallore8803
9 ай бұрын
great breakdown .
@docjody8624
Жыл бұрын
1998 RAV4 Upper Timing Cover has the opposite-- 3 x Short Bolts + 1-Long Bolt
@aldorubini2479
Жыл бұрын
Su trabajo es exelente felicitaciones 👏 muchas gracias por compartir tus conocimientos 😊 saludos desde Argentina 👍 😉
@LabCoatPaul
5 ай бұрын
Close. 2003 Nissan Altima wheels.
@user-wc2vx7wu6g
11 ай бұрын
Thank you very much that was helps a lot
@h0udinl
Жыл бұрын
Is it possible to do without removing the bottom engine mount
@robertalfonso9114
Жыл бұрын
Your videos have been really helpful. At the 9:53 mark, you use a tool to help you torque the cam gear down. Could you give some information on that tool?
@LabCoatPaul
Жыл бұрын
I made that tool. It's just a piece of metal with 2 bolts sticking out to hold the cam gear. If you have the valve cover off, you can hold the camshaft with a 15/16" or 24mm wrench
@1PvP
3 жыл бұрын
Would you do a video on installing a bullbar? Also, what is a 3SGTE swap, see a lot of people talking about it. Thanks for the great videos!
@LabCoatPaul
3 жыл бұрын
I probably will do some bolt on accessories soon. Not sure if I want the bull bar or not. The first generation comes stock with a 2.0 liter 4 cylinder engine with about 120 horsepower. The name for that engine is 3S-FE. The 3S-GTE is a popular swap because it shares the same 3S engine block, so it fits in the car just fine and mostly bolts up. The 3S-GTE is also a 2.0 liter, but it has a turbo and puts out 260 horsepower. That's much better. It's an expensive swap because you have to get the engine from Japan and the transmission needs to be replaced to handle the extra power.
@1PvP
3 жыл бұрын
@@LabCoatPaul Sounds like a cool swap, but I don't got the money haha! Thanks for the reply.
@jnewzealand4677
2 жыл бұрын
Simply excellent!
@dtomei4236
4 күн бұрын
Just completed the job and my idle is very low almost 500rpm and wants to die out. Is it possible my timing is off and I didn’t align the crankshaft/camshaft correctly?
@iamcaferacer
Жыл бұрын
Impressive video
@bkendall315
Жыл бұрын
Thanks again : )
@LabCoatPaul
Жыл бұрын
Thanks for supporting my channel! I'm glad you're enjoying the RAV4 videos.
@rolandoherrera4553
3 жыл бұрын
Thank you very much for the video👍
@adammrsic1559
4 ай бұрын
Hi i have a question. I have 1996 toyota rav4. I did engine compression car engine was cold i can't start the vehicle anyway it does crank. Cylinder #1 had 135 psi. Cylinder #2 had 120 psi. Cylinder #3 had 145 and the last one had 135 psi. Do you think compression is ok ? Car does have high miles
@technicalprovlogs6249
Жыл бұрын
sir, next video, how to replace of transfer case seal of 4 wheel drive
@jimmyBurnett
Жыл бұрын
Could i start the motor right after i put on the timing belt? Nothings else. Like to see if there's a problem before i put it all back together.
@LabCoatPaul
Жыл бұрын
Yes. It's ok to start the engine with the timing cover off and the right side motor mount off. Just don't drive it like that.
@jimkurk5575
Жыл бұрын
hello-can i get top part of cover off without taking motor mount off, think the guy that put the belt in got it off a cog but he will not check it so i ave to work on it myself, i am old and not to agile anymore, thanks
@miguelespinoza1322
3 жыл бұрын
Finally! Thanks man
@jameswelldon5782
3 жыл бұрын
Good job 👍
@luckymutibo9848
2 жыл бұрын
Thanks for the video.have the same car n it's a job I have to do
@user-np5vt1uv7n
9 ай бұрын
Спасибо, всё понял. 👍
@timeorspace
3 жыл бұрын
Impressive production, I will review this for specs when 4 door '99 is apart and I'm tackling the noise under the timing cover. Thank You....What's up with the parts paint....educational tool?
@LabCoatPaul
3 жыл бұрын
Thanks! I'm glad the video is useful for you. The different colored paint makes it much easier to see all the parts. I was filming most of my videos with an old gopro hero 5, and that camera can see car parts about as well as a grandma with cataracts. It was very hard to make out black parts that are near silver parts. The colors help the camera a lot. Now I'm using my iPhone 12 pro, and the video quality looks awesome.
@timeorspace
3 жыл бұрын
I peeked into the lower timing belt cover and my belt has some kind gummy substance throughout, water pump has coolant stalactites, and the belt is loose with a 'water mark' line on the smooth side. My plan was to remove timing cover, and run engine to observe where noises/leaks are coming from. That motor mounting bracket has been my road block, because the upper timing cover won't come out with it attached....it is really a pain. I drained the P.Steer pump via vacuum switch & long funnel, b/c it has a leak and thought it would make space for wrenching on the upper bracket bolt.....but it is proving difficult to extract as well....soaking two motor mount bracket bolts, etc. in WD-40 over night, and I may gather a square drive socket cap so I can pull on my 1/2in drive 6 point 14mm impact socket tomorrow.
@TheSlekkie
2 ай бұрын
Hi! Can you help? I was driving my rav4 on the highway then all of a sudden engine cut out, engine light came on. When I stopped water was leaking out for about 2 min the stopped. Engine still turns over but doesn't start. The car didn't overheat. water was leaking by the timing belt area
@Kfed1995
8 ай бұрын
Hey man I’m having trouble with my Rav I just had to do the timing belt/water pump but now I am having coolant leak from the return off of the backside of the water pump and in your video you didn’t mention what you did about those you just said it was done after attaching the front hoses @9:00 min in? I’m having the bottom of those two pipes leak :/ any help would be greatly appreciated!
@LabCoatPaul
8 ай бұрын
It sounds like you need new O-rings on the coolant pipe that runs along the front of the engine. The good news is you can remove that pipe without taking the timing belt or water pump off. Watch my cylinder head video at 44:21 kzitem.info/news/bejne/rKmsn2yAr3Sii6gsi=6cNGQmd99Gc6PDQd&t=2567
@Kfed1995
8 ай бұрын
@@LabCoatPaul thank you very much!
@marcosrocca8617
Жыл бұрын
Hi Paul, Great video! Do you have the part number for the alternator front pivot bolt? ( the 12mm that is on the right side) I cant find it anywhere.... the head of my bolt is torn so its pretty tough to fasten or take out. thanks
@LabCoatPaul
Жыл бұрын
It's at 15:11 in the video. Dorman 917-148 is an aftermarket replacement. It's lower quality than original. If you go to the junkyard you can get the good one.
@kurtisblumke562
11 ай бұрын
Any idea where the fuel pump relay is on a 1999 Rav4
@rickasdnorth
3 жыл бұрын
great video! good info👍🏽👍🏽👍🏽
@CarlosContreras-gk9gp
Жыл бұрын
❤
@Ionlyexistpardner.
Жыл бұрын
Timing belt still looks new.
@emilye709
Жыл бұрын
Idky but I can not wrap my head arounf the cam gear alignments. Why skip teeth? There is something im just not understanding.
@DJSHQIPFEST
Жыл бұрын
What do we do if we dont have a 5th gear and its automatic?
@LabCoatPaul
Жыл бұрын
You'll have to thread some bolts into the crank pulley, just long enough to stick out 1 inch past the pulley. They're M8x1.25. Then use a pry bar to keep the crank pulley from turning. Or, use a big oil filter strap wrench on the pulley.
@DJSHQIPFEST
Жыл бұрын
@@LabCoatPaul Thank you so much! Will attempt this later this week!
@mrdjf2010
3 жыл бұрын
Just got a 97 rav4 and the mechanic told me it was an interference engine! Guess I gotta do research myself
@spinningwheelsroadtravels5122
3 жыл бұрын
What's the final answer? I bought a '97 a year ago. Timing belt hasn't been changed in more than 110K miles. Am I really worried or not? Owner's manual makes vague reference about this subject. Would appreciate your answer.
@Fractal_CZ
3 жыл бұрын
That's the work I'll be doing within 2 weeks. I was pretty motivated to do so. Now, I'm scared.
@LabCoatPaul
3 жыл бұрын
Just follow the steps and you'll be fine. The good news is putting the timing belt on wrong won't break your engine, because it's a non-interference engine.
@Fractal_CZ
3 жыл бұрын
@@LabCoatPaul the pump went bad and exploded :) the worst part to me isthe motor mount part.
@spinningwheelsroadtravels5122
3 жыл бұрын
@@LabCoatPaul You're sure, right?
@LabCoatPaul
3 жыл бұрын
@@spinningwheelsroadtravels5122 Yup. Every source I've checked says the 3S-FE is non-interference. I've also turned the crank several revolutions with the timing belt off with no problems.
@spinningwheelsroadtravels5122
3 жыл бұрын
@@LabCoatPaul Great, The pressure's off ! Really appreciate your reply.
@pradolover
3 жыл бұрын
How did you do the pink wrap on the loom? Is it just electrical tape?
@LabCoatPaul
3 жыл бұрын
I degreased and pressure washed the wiring harness and removed all the old tape. Then I re-wrapped it in violet 3M super 33+ electrical tape, 1 section at a time so I wouldn't get the wires mixed up. It took 6 hours to do.
@mikepuhara1
2 жыл бұрын
I want to know how to remove my Toyota Rav4 3s-Ge idler Pully near alternator..
@rigobertoordonez5953
3 жыл бұрын
Grear job!!!
@andrewstevenssa
Жыл бұрын
Hi mate where is the best place for Rav 4 mk1 spares
@dankuhnly6186
Ай бұрын
That is not the left front wheel. That is the right front or passenger front.
@buddhull
Жыл бұрын
I had a massive oil leak from the oil pump seal and got the timing belt (and related nearby parts) done at the same time. Has anyone else noticed a slight smell once the car is running again after the timing belt job? It sort of smells like a belt, but I’m curious if it’s just a temporary thing as all of the new parts and no longer leaking oil operate as they should be.
@LabCoatPaul
Жыл бұрын
It's possible some oil spilled on the exhaust pipe and it's burning off now. Go to the car wash and pressure wash the engine and transmission, especially the under side. Be careful not to spray directly at wiring, the distributor, or spark plugs. Drive the car a bit, then check for leaks. New leaks will be easier to find if everything is clean.
@StrongerThanBigfoot
3 жыл бұрын
Man you and the Colorado woman mechanic are great. How and where did accumulate all this knowledge?
@LabCoatPaul
3 жыл бұрын
Mostly I just dig in to the car and figure it out. The factory service manual definitely helps with engine work. Here's a little secret: I watched the L35 in Colorado timing belt video to help me make this one.
@StrongerThanBigfoot
3 жыл бұрын
@@LabCoatPaul Yea she’s great and very detailed
@ReimanRestoration
2 жыл бұрын
Would you recommend this autozone kit over the aisin kit? I’m pretty lost with ordering parts, but I’m confident I can do the work. I’ve been told to do the aisin kit but your advice seems reliable as well… help a guy out please.
@LabCoatPaul
2 жыл бұрын
If you plan on driving the car a long time, go for the Aisin kit. Original quality has been proven to last over 20 years. Autozone? who knows, probably not that long.
@ReimanRestoration
2 жыл бұрын
@@LabCoatPaul Thanks dude! You’re the man!
@ReimanRestoration
2 жыл бұрын
@@LabCoatPaul also, this RAV is gonna have one rust spot hole on the rear gate. If you wanna put a pickaxe through yours and show me how to fix it I wouldn’t mind at all! Haha
@michaelpuglisi5108
Жыл бұрын
I’ve always been told that if a timing belt brakes the engine is screwed. You mentioned a broken timing belt won’t bust the engine on this engine. Why is that?
@LabCoatPaul
Жыл бұрын
The 3S-FE engine in the RAV4 is a non-interference engine. That means the intake and exhaust valves don't open far enough to be able to hit the piston. They will never reach the piston, even if the belt is installed wrong or broken. Some engines are interference engines, and the valves can hit the pistons if something goes wrong with the belt. A lot of engines with variable valve timing are interference engines. With newer cars, manufacturers got a bit smarter and started using timing chains instead of belts with the interference engines. Chains last much longer than belts, and you don't run into a situation where you accidentally destroy your engine trying to do some maintenance.
@miriamvivo4279
Жыл бұрын
Very reliable engine. Just do the recomended maintenance
@rajakhurshid6018
Жыл бұрын
I love toyota rave 4 1998 I have this with me but sad sometimes ports not easy to find in pakistan 😢
@atnamesarelame
8 ай бұрын
Anybody know the part number for the cranshaft pulley washer? I damaged mine badly and I can't find it anywhere.
@corthirteenth94
Жыл бұрын
ABS module in the way
@gradea1636
8 ай бұрын
So you don't have to drop oil?
@LabCoatPaul
8 ай бұрын
Nope. The entire timing belt job can be done without changing the oil.
@charlesrichards8493
Жыл бұрын
My 1997 RAV4 Taming belt always brake in 3days after every new replacement
@LabCoatPaul
Жыл бұрын
If your timing belt only lasts 3 days, something is wrong. Turn all your pulleys by hand to see if there is a problem. Camshaft, idler, tensioner, water pump, and oil pump. Inspect the pulleys to make sure the teeth aren't damaged and don't have any sharp edges. After setting up the timing belt and tensioner, try starting the engine with the timing cover off. Look to see if anything unusual is happening.
Пікірлер: 184