Not sure if I miss understood video but if you pulled off this build inside of eight days that is impressive
@billypettit7132
2 жыл бұрын
Just found your videos, I’m currently building a 93 blue 4Runner, SAS 5.29 gears, arb air locked for the front, locked rear, stock 3.0 for now, just started the assembly yesterday still tons of work to do but watching your videos is giving me extra motivation to get it done so I can go play lol
@pnwexplorer5343
2 жыл бұрын
Get her done, it’s snow season! I ran the 3.0 for one season worked just fine. But I eventually swapped over to the 3.4 and it’s a world of a difference!
@billypettit7132
2 жыл бұрын
@@pnwexplorer5343 I have a donor 3.4 here that will eventually make its way in just trying to get it up and running again to enjoy it for a few before I sink more time and money into it lol
@mikeh.753
2 жыл бұрын
Now that is what I call front diff articulation. This is a very appearing vehicle. Great job and the owner and/or builder should feel proud to own and build a sweet SAS Toyota like this. Great job 👍 and keep on keep'n on. Absolutely a thing of beauty.
@seanhayden103
2 жыл бұрын
Thats how I want my 92 to look😢👍💯✅
@MrRedneck444
Жыл бұрын
i live in the pnw to and that is my dream set up brothaaa
@jvogler_art4708
4 ай бұрын
you put a 1uz v8 in that and you've got an absolute destroyer.
@painteng
2 жыл бұрын
I like the song. Kidrock !
@mattbenson2497
2 жыл бұрын
Nice build. cool for sure!
@joeyd7865
4 жыл бұрын
What 3 link kit did you use. 8 days? Dang that's quick. Good job
@pnwexplorer5343
4 жыл бұрын
Joey D No kit just pieced it together. Mostly trail gear hangers for the frame, ruff stuff for the axle side brackets and all ruffstuff heims.
@scottgilliland5015
Жыл бұрын
Awesome job
@tonymontana6368
2 жыл бұрын
Nice.
@Sibshnaider4x4
2 жыл бұрын
Отличный проект👍
@jacobyota5128
2 жыл бұрын
Awesome build! Was that up in Walker Valley?
@pnwexplorer5343
2 жыл бұрын
Nope
@trevellanderson6152
7 ай бұрын
PNW Explorer, are you running Toyota High Steer on this 3 Link?
@terrymick2479
2 жыл бұрын
Just curious, why would you cut out the 4 link rear for leaf springs. Thx
@pnwexplorer5343
2 жыл бұрын
The rear was never designed for 4 link from factory. I chopped off the factory Chevy 1 ton width leaf perches and brought them in to fit within the toyota frame.
@domwinning9075
2 жыл бұрын
Whats the tire size on that? Im building a right hand drive surf atm with a 1.9TDI and landcruiser solid axles
@pnwexplorer5343
2 жыл бұрын
37
@CooRunner
Жыл бұрын
What length lower links are you running? 16” shocks?
@pnwexplorer5343
Жыл бұрын
Yes
@javiercastro6738
2 жыл бұрын
I need to know what roof rack that is. Been looking for one like it. 👍🏽
@carlosc8469
2 жыл бұрын
Maybe it's a Yakima roof rack
@jacksoncolby5936
2 жыл бұрын
@@carlosc8469 its definitely a yakima but I wonder which attachment for it
@nathangames226
2 жыл бұрын
What wheel and tire set up do you have
@pnwexplorer5343
2 жыл бұрын
36x13.5x15
@Eatadikcommiepig
Жыл бұрын
What 3link kit did you put in?
@pnwexplorer5343
Жыл бұрын
Bastard pack. Combo between ruffstuff and trailgear.
@specialformula14
2 жыл бұрын
what does SAS mean ?
@pnwexplorer5343
2 жыл бұрын
Solid axle swap
@specialformula14
2 жыл бұрын
@@pnwexplorer5343 thx
@dawsonfolk6546
4 жыл бұрын
I’ve got a couple question I’m cutting the ifs of my 86 runner
@pnwexplorer5343
4 жыл бұрын
Dawson Folk sure thing, what’s your question?
@dawsonfolk6546
4 жыл бұрын
Did you need to relocate your steering box how did you determine the height of the upper shock mount
@pnwexplorer5343
4 жыл бұрын
Dawson Folk steering box can be left in place if you are keeping the axle centered to where the original suspension sat under the frame. Shocks will have to be determined after you have most the suspension setup. Then you’ll have to measure for how much room you have to build a shock hoop and from there to determine what size of shock you want to run.
@dawsonfolk6546
4 жыл бұрын
PNW Explorer did you end up reinforcing your shock hoops at all. By that I mean a cross bar connecting the 2 hoops
@pnwexplorer5343
3 жыл бұрын
@@dawsonfolk6546 yes i did later after buying a tube bender, but i did run without for quite some time.
@thiccboyzgarage1585
2 жыл бұрын
Is that the trail gear kit
@pnwexplorer5343
2 жыл бұрын
No just the frame side lower link and upper link bracket are trailgear. All other bracket and heims are ruffstuff
@thiccboyzgarage1585
2 жыл бұрын
Copy that just got a 4runner and im gonna 3 link the front also
@scottmichael7178
2 жыл бұрын
8 days huh, lol
@joerouth6255
Жыл бұрын
I was thinking the same thing
@fightthelies4349
Жыл бұрын
It's not that hard. Did a frame swap on mine in 5 days. Did a 3.4 swap in 9 hours but it was our 3rd swap together with my friend, so we were already in the zone. From running with the 3.0 to running with the 3.4 no prob.
Пікірлер: 49