I like "Echizen Uchihamono". It may not be possible with corona now, but if you calm down, you can make it, but there are soulful knives. A kitchen knife with a strong attachment can turn your usual time into something that is many times more enjoyable. It's not dangerous because a knife that cuts well isn't played.
I often get inquiries about Petty Knife, but ■ Takefu Knife Village's Kreus 12P. CHECK the official website.
By the way, it appears on PV a little. * It's not a project just because I like it.
www.takefu-kni...
There is also an online shop.
The knife is sexy.
The process of knives-Approximately 5 and later are videos-
1. Steel making and base iron making
Heat the steel to 800 ° C and forge it to the specified size
2. Interruption and boiling
Break the base iron, make a groove, insert the steel, and forge the steel and the base iron.
3. Pre-attachment and cut-off
Shape the flat part of the knife and cut it into pieces
4. Core removal
Forged the part that goes inside the handle
5. Spread two sheets
Stack two sheets and roll them to the specified size
6. Annoying
After heating to about 800 ° C to 1000 ° C, naturally cool in the air
7. Mud and roughening
Remove deposits and smooth the surface with a Baltic hammer
8. Finishing
Lightly hit with a mallet and straighten it.
9. Cutting
Cut the excess part to fit the specified shape
10. Quenching
Apply mud and heat to 800 ° C to 1000 ° C, then quickly quench with water and bake.
11. Rough sharpening and medium sharpening
Make a rough shape with a rough whetstone, and sharpen the cutting edge laterally with a fine whetstone.
12. Sword attachment
Carefully sharpen the blade
13. Finish sharpening
Негізгі бет [Traditional workshop] Knife story-Knife that you hit yourself with a traditional craftsman-
Пікірлер: 109