Ted I've been a follower for a while and have never had to change the blower wheel in that kind of housing the 3 years I've been doing this so far. Today that changed. When searching for instructions your video poped up first. Thank you for this. Keep being bad ass
@ICONBADGTA
4 жыл бұрын
I be damned!! I just did one on Christmas Eve also, plastic housing (EXACTLY) like that one!! Wheel went to (PIECES) slung (EVERYWHERE)!! Crazy stuff!
@carlfoster3961
4 жыл бұрын
I do HVAC in Columbia SC and I think your videos are awesome. I hope you and your family had a great Christmas.
@chuckquinn8026
4 жыл бұрын
Merry Christmas Ted! Thanks for a great year of videos!
@llservice3376
4 жыл бұрын
Merry Christmas you and Steve Lav are my go to guys great videos keep em coming
@garyoconnordbaairrepair7775
4 жыл бұрын
Thanks for this video. I have yet to see an indoor fan motor in a plastic shroud. Now I know what to do. I hope you had a Merry Christmas Ted.
@stevenlavimoniere
4 жыл бұрын
merry christmas ted ,,,,good job on video
@sziltner
4 жыл бұрын
👍🏻 Merry Christmas Ted! And Happy 2020! Looking forward to a new year of your great videos.
@watermanone7567
4 жыл бұрын
Excellent job on Christmas Eve. Merry Christmas to you and your family.
@mikeyd5969
4 жыл бұрын
Hopefully you had a Merry Christmas as well Ted . God bless !
@IslandbreezeMechanical
4 жыл бұрын
You are like a Christmas Elf. Merry Christmas!
@milanmechanical4652
4 жыл бұрын
Great video Ted. First time seeing the plastic blower housings. Our Bryant and Payne units just switched to plastic blower wheels a few months ago. They seem much easier to clean than the standard metal wheels, but time will tell on longevity... Most of the failed blower wheels like this we have found are do to excessive static pressure (plugged filters/ac coils, undersized ducts, oversized equipment) causing the blower to over-speed to the point centrifugal force pulls the wheel apart in the center. We were 60 degrees for Christmas here in MI so I had it easy this year. Happy Holidays!
@TheWoodman064
4 жыл бұрын
You are a very commited person!
@TheWoodman064
4 жыл бұрын
Nice clean up!
@dmitrinachumovhvacapplianc1597
4 жыл бұрын
Merry Christmas good job and Happy New Year
@Bob.W.
4 жыл бұрын
I guess that call was your Christmas present. :) Always interested in those gas pack package units. Never see them on residential up "nord".
@johnwojsiat9924
4 жыл бұрын
You sound like Dennis Weaver from the old Gunsmoke and McClound TV show
@johnwojsiat9924
4 жыл бұрын
McCloud
@jaygdav
4 жыл бұрын
Bingo
@oldtimehomestead1554
4 жыл бұрын
Merry Christmas and Happy New Year.
@Eddy63
4 жыл бұрын
Good repair Ted ... Merry Christmas and Happy New Year ...
@jaygdav
4 жыл бұрын
I hope Tub O Towels is giving you a commission, cause I, for one, want a tub!
@natepeterson7145
4 жыл бұрын
Merry Christmas Ted!
@Ted_E_Bear
4 жыл бұрын
Thanks for posting !
@duaneroberson7447
4 жыл бұрын
Great Job 👍
@hkhsm359
4 жыл бұрын
merry Christmas.!
@donnierobertson3088
4 жыл бұрын
Nice job
@James_Bowie
4 жыл бұрын
Santa delivers heat. Well done. (PS: What I like about leaf blowers ......... nothing.)
@kg4yhr
4 жыл бұрын
Merry Christmas Ted hope you didn't get any more calls it seems as though ac work waits for no one spring and summer is the most busyist time for me in the apartment complex I have been doing this for 20+ years and ya can't wait for November where I work if it is above 90 then it is an emergency have a great new year
@Gabriel-vz7ml
Жыл бұрын
Thank you!
@donnierobertson3088
4 жыл бұрын
Second time watching 8/14/2020
@rickyhertz7250
4 жыл бұрын
Glad to see you exercising your 2nd amendment right ,Merry Christmas !
@mdovideo1414
4 жыл бұрын
Does trane make variable speed gas furnaces?
@throttlebottle5906
4 жыл бұрын
wheel failed/got bent first and the metal fatigue/cracking followed from all the vibration. wonder if it was bent from the start
@zekenzy6486
4 жыл бұрын
that's look like roof top package Unit ^_^
@richardhokemeir9425
4 жыл бұрын
Merry Christmas! A little bit late though! Lol
@chrisslone7854
3 жыл бұрын
What type of fan motor is this? I have the same exact heatpump if that’s a 3 ton. Mines making a noise. Before it made the noise sounded like something in it backfired like a pop when heatpump would kick off. I took it apart now sounds like fan motor may had something explode in it or something. When it first blows air it blows to hard or something I can hear it inside the house like it’s gonna plow out the duct work. Then while blowing sounds like it’s missing a blade or something. Any help be greatly appreciated
@countryagee4196
2 жыл бұрын
How u wire the new motor up when you reinstall it
@skimask3
4 жыл бұрын
Sqweeky voice sounds like a shrew doing their thing LOL
@brianhouk543
4 жыл бұрын
I knew Ted had to be a Harley rider with that long hair haha
@AMStationEngineer
4 жыл бұрын
I'm trying to determine if Ted is receiving assistance from Alvin, Simon, Theodore, or possibly Cousin Itt.... Damn fun, though, have the best of Christmas Holidays...
@christiand.6112
4 жыл бұрын
That’s quite a bit of mildew/mold on that fan, I’d definitely offer some type of UV light or Airscrubber for that furnace if it were me.
@timewithjo248
3 жыл бұрын
Hi Sir, Can you tell me how much this would cost with manufacturers part? We need this exact thing done.! I might try to do it myself! :) but how much would be the cost for someone to do it? Great great video!!
@winkhvac62
4 жыл бұрын
Never see plastic blower like that first time
@urbanojuarez3268
4 жыл бұрын
Hi ted
@andrecampbell691
4 жыл бұрын
That plastic fan shroud looks like trouble, wouldn't install it in my house.
@mychoclabwinston
4 жыл бұрын
That’s a lot of mould on the housing, it isn’t just dirt
@Sctronic209
4 жыл бұрын
I had a blower wheel that was so bad it was egg shaped.
@lance16O1
4 жыл бұрын
Same here in VA. VERY similar unit.
@chatrkat
Жыл бұрын
I realize my comment it 2 years after this posted, but what the heck makes those wheels come apart or loosen up and go out of shape? That’s rather unacceptable quality in my opinion. I assume those come from China now too just like motors.
@douro20
4 жыл бұрын
You're the business owner aren't you? Ever got a fax bomb before?
Пікірлер: 52