bang on sirrrrrr nice to see someone using copper grease
@joebates7939
Жыл бұрын
The best video ever. Not boring and very informative 👌 👍
@PitStakProductions
Жыл бұрын
Thanks!.., hope it’s helpful, kind regards
@buggs9950
2 жыл бұрын
That's a nicely made tutorial, good stuff. 8:45 Personally I've always refitted the axle backwards to hold the bearing together. It doesn't seem to be an issue looking at how yours went but I've always played it safe just in case.
@PitStakProductions
2 жыл бұрын
If you watch any videos on stripping the bearings, there’s no danger of it coming apart in this way, kind regards
@alanwilletts602
3 жыл бұрын
That was a grand tutorial. Just bought this model so your vid has saved me a lot of time and stress. Cheers!
@PitStakProductions
3 жыл бұрын
Alan Willetts Thanks!, hope it helps, regards
@pelican7481
3 жыл бұрын
This man knows his stuff.
@PitStakProductions
3 жыл бұрын
Too kind, thought of an idea, shared it, makes the world go round
@pelican7481
4 жыл бұрын
Just changed the pads like a boss in his dress shoes👌🏿
@PitStakProductions
3 жыл бұрын
Hope it helped, regards
@insomniauk1
3 жыл бұрын
excellent tutorial.. feeling more confident to attack mine tomorrow. thanks :)
@PitStakProductions
3 жыл бұрын
insomniauk1 Welcome, make sure to clean out the threads first, usually easy job then, good luck 😉
@WeeTomSniper
5 жыл бұрын
Excellent - many thanks for pulling that together.
@PitStakProductions
5 жыл бұрын
David Henderson Welcome, hope it helps
@jamesbarber3164
4 жыл бұрын
Never thought to use a “G’ clamp to push the pistons in! What a great idea! Very helpful video, thank you for sharing!
@PitStakProductions
4 жыл бұрын
James Barber Thanks, it works really well, no real force needed, regards
@yensabi
4 жыл бұрын
Great informative video , thanks.........👍
@PitStakProductions
4 жыл бұрын
yensabi Welcome, Hope it’s helpful
@nexpro6985
Жыл бұрын
Thanks
@PitStakProductions
Жыл бұрын
Welcome!
@ronaldo10jg
3 жыл бұрын
Thanks!
@PitStakProductions
3 жыл бұрын
Welcome, hope it helps, regards
@mrchickeneater1933
5 жыл бұрын
Hi is it the same procedure for fwd transit? Cheers
@PitStakProductions
5 жыл бұрын
mrChickeneater Afraid not, it’s more involved, you’ll have to remove the drive shafts
@onemanbanddan
7 ай бұрын
Mate, please wear the welding gloves when you're using the grinder like that. Just from someone who knows. That machine can hurt you.
@raytaylor4089
2 жыл бұрын
Tried this way with the bolts unfortunately two of the original bolts went round in the head and I had to cut the heads off and so could not use your method
@PitStakProductions
2 жыл бұрын
O dear, sorry to hear that, you can’t win them all, keep battling
Пікірлер: 29